AcmP 0.0.2

For developers of Advantech PCIE-12xx series access to the AdvMot API.

AcmP SDK

This SDK package allows developers to esaily use Advantech AdvMot api.

Installation

This SDK supports Python version 3.10 or later

$ pip install AcmP

Before using this package, please ensure the following items are already installed:

Linux

1. PCIE-1203.ko
2. libadvmot.so
3. libpcie1203.so

You can check the installation using the following commands.

$ lsmod | grep PCI
$ ls /lib | grep adv
$ ls /lib | grep pci

Windows

1. PCIE1203s.sys
2. ADVMOT.dll
3. PCIE1203.dll

You can check the installation using the following commands.

ls C:\Windows\System32\ | findstr ADVMOT
ls C:\Windows\System32\ | findstr PCIE1203

Available Devices

• Advantech PCIE-1203

API

How to use?

Due to our driver running with admin/root authentication, it's important to execute the project with admin/root privileges.

AdvCmnAPI_CM2

• Device
  • Acm2_DevOpen
  • Acm2_DevInitialize
  • Acm2_GetAvailableDevs
  • Acm2_DevExportMappingTable
  • Acm2_DevImportMappingTable
  • Acm2_GetMappedLogicalIDList
  • Acm2_GetMappedObjInfo
  • Acm2_DevAllClose
  • Acm2_GetLastError
  • Acm2_GetMappedPhysicalID
  • Acm2_SetProperty
  • Acm2_GetProperty
  • Acm2_SetMultiProperty
  • Acm2_GetMultiProperty
  • Acm2_GetRawProperty
  • Acm2_EnableCallBackFuncForOneEvent
  • Acm2_DevLoadAllConfig
  • Acm2_DevLoadConfig
  • Acm2_DevReadMailBox
  • Acm2_DevWriteMailBox
  • Acm2_GetErrors
  • Acm2_ResetErrorRecord
  • Acm2_DevPreviewMotion
• Axis
  • Acm2_AxReturnPausePosition
  • Acm2_AxSetSvOn
  • Acm2_DevSetAllSvOn
  • Acm2_AxSetErcOn
  • Acm2_AxResetAlm
  • Acm2_AxPTP
  • Acm2_AxMoveContinue
  • Acm2_AxMotionStop
  • Acm2_AxHome
  • Acm2_AxMoveGantryHome
  • Acm2_AxSetHomeSpeedProfile
  • Acm2_AxChangePos
  • Acm2_AxChangeVel
  • Acm2_AxChangeVelByRate
  • Acm2_AxMoveImpose
  • Acm2_AxResetError
  • Acm2_DevResetAllError
  • Acm2_AxGetState
  • Acm2_AxGetMotionIO
  • Acm2_AxSetPosition
  • Acm2_AxGetPosition
  • Acm2_AxSetSpeedProfile
  • Acm2_AxGetVel
  • Acm2_AxEnableExternalMode
  • Acm2_AxSoftJog
  • Acm2_AxSetJogSpeedProfile
  • Acm2_AxMotionStart
  • Acm2_AxPause
  • Acm2_AxResume
  • Acm2_AxResetPVTTable
  • Acm2_AxLoadPVTTable
  • Acm2_AxLoadPVTTableContinuous
  • Acm2_AxMovePVT
  • Acm2_AxCheckPTBuffer
  • Acm2_AxAddPTData
  • Acm2_AxMovePT
  • Acm2_AxResetPTData
  • Acm2_AxGearIn
  • Acm2_AxGantryIn
  • Acm2_AxPhaseAx
  • Acm2_AxSyncOut
• Group
  • Acm2_GpGetPausePosition
  • Acm2_GpCreate
  • Acm2_GpGetAxesInGroup
  • Acm2_GpResetError
  • Acm2_GpLine
  • Acm2_GpArc_Center
  • Acm2_GpArc_3P
  • Acm2_GpArc_Angle
  • Acm2_Gp3DArc_Center
  • Acm2_Gp3DArc_NormVec
  • Acm2_Gp3DArc_3P
  • Acm2_Gp3DArc_3PAngle
  • Acm2_GpHelix_Center
  • Acm2_GpHelix_3P
  • Acm2_GpHelix_Angle
  • Acm2_GpResume
  • Acm2_GpPause
  • Acm2_GpMotionStop
  • Acm2_GpChangeVel
  • Acm2_GpChangeVelByRate
  • Acm2_GpGetVel
  • Acm2_GpSetSpeedProfile
  • Acm2_GpGetState
  • Acm2_GpLoadPath
  • Acm2_GpAddPath
  • Acm2_GpMovePath
  • Acm2_GpResetPath
  • Acm2_GpGetPathStatus
  • Acm2_GpMoveSelPath
  • Acm2_GpGetPathIndexStatus
  • Acm2_GpDelay
  • Acm2_GpPathDO
  • Acm2_GpPathWaitDI
  • Acm2_GpPathWaitForAxis
  • Acm2_GpLookAheadPath
  • Acm2_GpLookAheadPathFile
• DIO
  • Acm2_ChSetDOBit
  • Acm2_ChGetDOBit
  • Acm2_ChGetDIBit
  • Acm2_ChSetDOBitByRingNo
  • Acm2_ChGetDOBitByRingNo
  • Acm2_ChGetDIBitByRingNo
  • Acm2_ChSetDOByte
  • Acm2_ChGetDOByte
  • Acm2_ChGetDIByte
  • Acm2_ChSetDOByteByRingNo
  • Acm2_ChGetDOByteByRingNo
  • Acm2_ChGetDIByteByRingNo
• AIO
  • Acm2_ChSetAOData
  • Acm2_ChGetAOData
  • Acm2_ChSetAODataByRingNo
  • Acm2_ChGetAODataByRingNo
  • Acm2_ChGetAIData
  • Acm2_ChGetAIDataByRingNo
  • Acm2_ChGetCntData
  • Acm2_ChSetCntData
  • Acm2_ChLinkCmpFIFO
  • Acm2_ChLinkCmpObject
  • Acm2_ChGetLinkedCmpObject
  • Acm2_ChEnableCmp
  • Acm2_ChSetCmpOut
  • Acm2_ChSetCmpDoOut
  • Acm2_AxGetCmpData
  • Acm2_ChGetCmpData
  • Acm2_AxSetCmpTable
  • Acm2_AxSetCmpAuto
  • Acm2_ChSetCmpAuto
  • Acm2_ChSetCmpBufferData
  • Acm2_ChSetMultiCmpTable
  • Acm2_ChSetMultiCmpBufferData
  • Acm2_ChResetCmpData
  • Acm2_ChGetCmpBufferStatus
  • Acm2_ChLinkLatchAxis
  • Acm2_ChLinkLatchObject
  • Acm2_ChGetLinkedLatchObject
  • Acm2_ChTriggerLatch
  • Acm2_AxReadLatchBuffer
  • Acm2_ChReadLatchBuffer
  • Acm2_AxGetLatchBufferStatus
  • Acm2_ChGetLatchBufferStatus
  • Acm2_AxResetLatchBuffer
  • Acm2_ChResetLatchBuffer
  • Acm2_ChLinkPWMTable
  • Acm2_ChGetLinkedPWMTable
  • Acm2_ChSetPWMTable
  • Acm2_ChLoadPWMTableFile
  • Acm2_ChGetPWMTableStatus
  • Acm2_ChGetExtDriveData
  • Acm2_ChSetExtDriveData
  • Acm2_ChLinkExtDriveObject
  • Acm2_ChGetLinkedExtDriveObject
  • Acm2_DevMDaqConfig
  • Acm2_DevMDaqGetConfig
  • Acm2_DevMDaqStart
  • Acm2_DevMDaqStop
  • Acm2_DevMDaqReset
  • Acm2_DevMDaqGetStatus
  • Acm2_DevMDaqGetData
  • Acm2_GetDSPFrmWareDwnLoadRate
• EtherCAT
  • Acm2_DevLoadENI
  • Acm2_DevConnect
  • Acm2_DevDisConnect
  • Acm2_DevGetSubDevicesID
  • Acm2_DevGetMDeviceInfo
  • Acm2_DevGetSubDeviceInfo
  • Acm2_DevGetSubDeviceFwVersion
  • Acm2_DevSetSubDeviceID
  • Acm2_DevSetSubDeviceStates
  • Acm2_DevGetSubDeviceStates
  • Acm2_DevWriteSDO
  • Acm2_DevReadSDO
  • Acm2_DevWritePDO
  • Acm2_DevReadPDO
  • Acm2_DevWriteReg
  • Acm2_DevReadReg
  • Acm2_DevReadSubDeviceCommErrCnt
  • Acm2_Ax1DCompensateTable
  • Acm2_Ax2DCompensateTable
  • Acm2_AxZAxisCompensateTable
  • Acm2_AxGetCompensatePosition
  • Acm2_DevOscChannelDataStart
  • Acm2_DevOscChannelDataStop
  • Acm2_DevGetOscChannelDataConfig
  • Acm2_DevSetOscChannelDataConfig
  • Acm2_DevGetOscChannelData
  • Acm2_DevGetOscChannelStatus

---

Acm2_GetAvailableDevs

Get all device list.

Acm2_DevOpen

Open device with device number.

Acm2_DevExportMappingTable

Export mapping table of device.

Acm2_DevImportMappingTable

Import mapping table of device.

Acm2_GetMappedPhysicalID

Get mapped physical id of device.

Acm2_GetMappedLogicalIDList

Get mapped list of logical id.

Acm2_GetMappedObjInfo

Get mapped object information.

Acm2_DevAllClose

Close all device at same time.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.MotionInfo import DEVICEINFO

number_hex = '0x63000000'
number_int = int(number_hex, 16)
device_number = c_uint32(number_int)
dev_list = (DEVLIST*10)()
device_info = DEVICEINFO()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Then open
errCde = AdvMot.Acm2_DevOpen(device_number, byref(device_info))
# Close device
errCde = AdvMot.Acm2_DevAllClose()

Acm2_DevInitialize

Initial the device.

Acm2_AxGetPosition

Get axis position by axis number, and position type.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotDrv import POSITION_TYPE

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()
axid = c_uint32(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
pos = c_double(0)
# Get axis 0 command position
errCde = AdvMot.Acm2_AxGetPosition(axid, pos_type, byref(pos))

Acm2_AxPTP

Set axis move with position.

Acm2_AxGetState

Get axis state.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotDrv import POSITION_TYPE, ABS_MODE, AXIS_STATUS_TYPE

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()
axid = c_uint32(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
pos = c_double(0)
distance = c_double(1000)
abs_mode = c_uint(ABS_MODE.MOVE_REL.value)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
state = c_uint32(16)
# Get axis 0 command position
errCde = AdvMot.Acm2_AxGetPosition(axid, pos_type, byref(pos))
# Move axis 0 to position 1000(command position)
errCde = AdvMot.Acm2_AxPTP(axid, abs_mode, distance)
# Check axis 0 status
errCde = AdvMot.Acm2_AxGetState(axid, state_type, byref(state))

Acm2_SetProperty

Set device/axis property.

Acm2_GetProperty

Get device/axis property.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()
do_ch = c_uint32(0)
property_id = c_uint(PropertyID2.CFG_CH_DaqDoFuncSelect.value)
val = c_double(1)
# Set local DO channel 0 as gerneral DO
errCde = AdvMot.Acm2_SetProperty(do_ch, property_id, val)
get_val = c_double(0)
# Get local DO channel 0 property value
errCde = AdvMot.Acm2_GetProperty(do_ch, property_id, byref(get_val))

Acm2_SetMultiProperty

Set multiple properties at once.

Acm2_GetMultiProperty

Get multiple properties at once.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()
# Set axis 0 speed info at once
ax_id = c_uint32(0)
property_arr = [c_uint32(PropertyID2.PAR_AxVelLow.value), c_uint32(PropertyID2.PAR_AxVelHigh.value)]
trans_ppt_arr = (c_uint32 * len(property_arr))(*property_arr)
# Default value of velocity low is 2000, and velocity high is 8000.
value_arr = [c_double(1000), c_double(2000)]
trans_val_arr = (c_double * len(value_arr))(*value_arr)
data_cnt = c_uint32(2)
err_buffer = (c_uint32 * data_cnt.value)()
# Set value
errCde = AdvMot.Acm2_SetMultiProperty(ax_id, trans_ppt_arr, trans_val_arr, data_cnt, err_buffer)
# Check value
get_val = (c_double * data_cnt.value)()
errCde = AdvMot.Acm2_GetMultiProperty(ax_id, trans_ppt_arr, get_val, data_cnt, err_buffer)
for i in range(data_cnt.value):
    print('set[{0}]:{1}, get:{2}'.format(i, value_arr[i].value, get_val[i]))

Acm2_GetRawProperty

Get raw property value.

Acm2_EnableCallBackFuncForOneEvent

Set callback function for event.

Acm2_DevLoadAllConfig

Load all configuration at once.

Acm2_DevLoadConfig

Load configuration.

Acm2_DevReadMailBox

Read mailbox of device.

Acm2_DevWriteMailBox

Write mailbox of device.

Acm2_GetErrors

Get error of device.

Acm2_ResetErrorRecord

Reset error.

Acm2_DevPreviewMotion

Preview motion.

Acm2_ChSetDOBit

Set DO bit by channel.

# Using the example code after LoadENI & Connect
import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

# Set DO channel, local DO on PCIE-1203 is 0~1, rest of device will set from channel 8~
do_channel8 = c_uint32(8)
do_channel14 = c_uint32(14)
bit_data = c_uint32(DO_ONOFF.DO_ON.value)
# Set DO(8) on
errCde = AdvMot.Acm2_ChSetDOBit(do_channel8, bit_data)
# Set DO(14) on
errCde = AdvMot.Acm2_ChSetDOBit(do_channel14, bit_data)
time.sleep(0.5)
get_data8 = c_uint32(0)
get_data14 = c_uint32(0)
# Get DO(8) value
errCde = AdvMot.Acm2_ChGetDOBit(do_channel8, byref(get_data8))
# Get DO(14) value
errCde = AdvMot.Acm2_ChGetDOBit(do_channel8, byref(get_data14))

Acm2_ChGetDOBit

Get DO bit by channel.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

do_ch = c_uint32(0)
property_id = c_uint(PropertyID2.CFG_CH_DaqDoFuncSelect.value)
val = c_double(1)
# Set local DO channel 0 as gerneral DO
errCde = AdvMot.Acm2_SetProperty(do_ch, property_id, val)
get_val = c_double(0)
# Get local DO channel 0 property value
errCde = AdvMot.Acm2_GetProperty(do_ch, property_id, byref(get_val))
# Set local DO channel 0 ON
data = c_uint32(1)
errCde = AdvMot.Acm2_ChSetDOBit(do_ch, data)
# Get local DO channel 0 value
get_data = c_uint32(0)
errCde = AdvMot.Acm2_ChGetDOBit(do_ch, byref(get_data))

Acm2_GetLastError

Get last error of system.

Acm2_AxReturnPausePosition

Get axis pause position.

Acm2_AxSetSvOn

Set axis servo on/off.

Acm2_DevSetAllSvOn

Set all axes servo on.off.

Acm2_AxSetErcOn

Set axis erc on/off.

Acm2_AxResetAlm

Reset axis alarm logic.

Acm2_AxMoveContinue

Set aixs continue move.

Acm2_AxMotionStop

Force axis stop motion.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ax_id = c_uint32(0)
move_dir = c_uint(MOTION_DIRECTION.DIRECTION_POS.value)
errCde = AdvMot.Acm2_AxMoveContinue(ax_id, move_dir)
time.sleep(2)
ax_arr = [c_uint32(0)]
axArr = (c_uint32 * len(ax_arr))(*ax_arr)
stop_mode = c_uint(MOTION_STOP_MODE.MOTION_STOP_MODE_DEC.value)
new_dec = c_double(3000)
errCde = AdvMot.Acm2_AxMotionStop(axArr, len(ax_arr), stop_mode, new_dec)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis position
starting_pos = c_double(0)
pos = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
errCde = AdvMot.Acm2_AxGetPosition(ax_id, pos_type, byref(pos))

Acm2_AxHome

Set axis moving home with direction and home mode.

Acm2_AxMoveGantryHome

Set axis moving home with gantry.

Acm2_AxSetHomeSpeedProfile

Set axis home speed config.

Acm2_AxChangePos

Set axis position.

Acm2_AxChangeVel

Set axis velocity.

Acm2_AxChangeVelByRate

Set axis velocity by rate.

Acm2_AxMoveImpose

Set axis impose.

Acm2_AxResetError

Reset error of axis.

Acm2_DevResetAllError

Reset all device error.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import DEVLIST
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()
# Clear all error
errCde = AdvMot.Acm2_DevResetAllError()

ax_id = c_uint32(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
pos = c_double(0)
# Set axis 0 command position as 0
errCde = AdvMot.Acm2_AxSetPosition(ax_id, pos_type, pos)

Acm2_AxGetMotionIO

Get axis motion IO status.

Acm2_AxSetPosition

Set axis position.

Acm2_AxSetSpeedProfile

Set axis speed information.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ax_id = c_uint32(0)
speed_info = SPEED_PROFILE_PRM()
speed_info.FH = c_double(3000)
speed_info.FL = c_double(1500)
speed_info.Acc = c_double(11000)
speed_info.Dec = c_double(9900)
speed_info.JerkFac = c_double(0)
# Set speed information
errCde = AdvMot.Acm2_AxSetSpeedProfile(ax_id, speed_info)

Acm2_AxGetVel

Get axis current velocity.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotPropID_CM2 import PropertyID2
from AcmP.AdvMotDrv import VELOCITY_TYPE

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ax_id = c_uint32(0)
get_vel = c_double(0)
vel_Type = c_uint(VELOCITY_TYPE.VELOCITY_CMD.value)
# Get axis 0 current velocity
errCde = AdvMot.Acm2_AxGetVel(ax_id, vel_Type, byref(get_vel))

Acm2_AxEnableExternalMode

Enable axis external mode.

Acm2_AxSoftJog

Set axis jog.

Acm2_AxSetJogSpeedProfile

Set axis jog speed information.

from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ax_id = c_uint32(0)
jog_speed_info = JOG_SPEED_PROFILE_PRM()
jog_speed_info.FH = c_double(8000)
jog_speed_info.FL = c_double(1000)
jog_speed_info.Acc = c_double(10000)
jog_speed_info.Dec = c_double(5000)
jog_speed_info.VLTime = c_double(2000)
# Set axis 0 jog speed information
errCde = AdvMot.Acm2_AxSetJogSpeedProfile(ax_id, jog_speed_info)

Acm2_AxMotionStart

Start motion.

Acm2_AxPause

Pause motion.

Acm2_AxResume

Resume motion.

Acm2_AxResetPVTTable

Reset axis PVT table.

Acm2_AxLoadPVTTable

Load axis PVT table.

Acm2_AxLoadPVTTableContinuous

Continuous loading PVT table.

Acm2_AxMovePVT

Move PVT motion.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ax_id = c_uint32(0)
# Reset PVT table
errCde = AdvMot.Acm2_AxResetPVTTable(ax_id)
''' PVT table
|Position|Vel |Time|
|--------|----|----|
|0       |0   |0   |
|5000    |4000|2000|
|15000   |5000|3000|
|30000   |8000|4000|
'''
pos_arr = [c_double(0), c_double(5000), c_double(15000), c_double(30000)]
posArr = (c_double * len(pos_arr))(*pos_arr)
vel_arr = [c_double(0), c_double(4000), c_double(5000), c_double(8000)]
velArr = (c_double * len(vel_arr))(*vel_arr)
time_arr = [c_double(0), c_double(2000), c_double(3000), c_double(4000)]
timeArr = (c_double * len(time_arr))(*time_arr)
# Set table of PVT
errCde = AdvMot.Acm2_AxLoadPVTTable(ax_id, posArr, velArr, timeArr, len(pos_arr))
# Set PVT
errCde = AdvMot.Acm2_AxMovePVT(ax_id)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
get_pos = c_double(0)
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
# Get axis 0 state
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Check axis 0 is ready
if (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(ax_id, pos_type, byref(get_pos))

Acm2_AxCheckPTBuffer

Check axis PT buffer.

Acm2_AxAddPTData

Add axis PT data.

Acm2_AxMovePT

Move PT motion.

Acm2_AxResetPTData

Reset axis PT data.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ax_id = c_uint32(0)
# Reset PT table
errCde = AdvMot.Acm2_AxResetPTData(ax_id)
''' PT table
|Position|Time|
|--------|----|
|0       |0   |
|5000    |2000|
|15000   |3000|
|30000   |5000|
'''
pos_arr = [c_double(0), c_double(5000), c_double(15000), c_double(30000)]
time_arr = [c_double(0), c_double(2000), c_double(3000), c_double(5000)]
# Set PT table
for i in range(len(pos_arr)):
    errCde = AdvMot.Acm2_AxAddPTData(ax_id, pos_arr[i], time_arr[i])
# Start move PT table
errCde = AdvMot.Acm2_AxMovePT(ax_id)

pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
get_pos = c_double(0)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(ax_id, pos_type, byref(get_pos))

Acm2_AxGearIn

Set axis gear.

Acm2_AxGantryIn

Set axis gantry.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

primary_ax = c_uint32(0)
follow_ax = c_uint32(1)
# Reset following axis
errCde = AdvMot.Acm2_AxSyncOut(follow_ax)
# Set gantry parameter
gantry_param = GANTRY_IN_PRM()
# Set gantry reference source as command position
gantry_param.RefSrc = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Set gantry direction as positive
gantry_param.Direction = c_uint(MOTION_DIRECTION.DIRECTION_POS.value)
# Set gantry
errCde = AdvMot.Acm2_AxGantryIn(primary_ax, follow_ax, gantry_param)
# Move primary axis
abs_mode = c_uint(ABS_MODE.MOVE_REL.value)
distance = c_double(10000)
errCde = AdvMot.Acm2_AxPTP(primary_ax, abs_mode, distance)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 (primary) position
errCde = AdvMot.Acm2_AxGetPosition(primary_ax, pos_type, byref(get_pos_0))
# Get axis 1 (following) position
errCde = AdvMot.Acm2_AxGetPosition(follow_ax, pos_type, byref(get_pos_1))
# Reset following axis
errCde = AdvMot.Acm2_AxSyncOut(follow_ax)

Acm2_AxPhaseAx

Set axis phase.

Acm2_AxSyncOut

Lift the gantry.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

primary_ax = c_uint32(0)
follow_ax = c_uint32(1)
# Reset following axis
errCde = AdvMot.Acm2_AxSyncOut(follow_ax)
gear_param = GEAR_IN_PRM()
# Position type as command position
gear_param.RefSrc = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Mode as relative mode
gear_param.Mode = c_uint32(0)
# Set gear ratio
gear_param.GearPosition = c_double(0)
gear_param.GearRatioRate.Num = c_double(1)
gear_param.GearRatioRate.Den = c_double(1)
# Set gear
errCde = AdvMot.Acm2_AxGearIn(primary_ax, follow_ax, gear_param)
# Move primary axis
abs_mode = c_uint(ABS_MODE.MOVE_REL.value)
distance = c_double(10000)
errCde = AdvMot.Acm2_AxPTP(primary_ax, abs_mode, distance)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 (primary) position
errCde = AdvMot.Acm2_AxGetPosition(primary_ax, pos_type, byref(get_pos_0))
# Get axis 1 (following) position
errCde = AdvMot.Acm2_AxGetPosition(follow_ax, pos_type, byref(get_pos_1))
# Reset following axis
errCde = AdvMot.Acm2_AxSyncOut(follow_ax)

Acm2_GpGetPausePosition

Get group pause position.

Acm2_GpCreate

Create group.

Acm2_GpGetAxesInGroup

Check axes in group.

Acm2_GpResetError

Reset error of group.

Acm2_GpLine

Move group in line.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set group move as relative
gp_move_mode = c_uint(GP_LINE_MODE.LINE_REL.value)
# Set group end position: axis(0) = 10000, axis(1) = 10000
end_pos_arr = [c_double(10000), c_double(10000)]
arr_element = c_uint32(len(end_pos_arr))
end_arr = (c_double * len(end_pos_arr))(*end_pos_arr)
# Group 0 move line
errCde = AdvMot.Acm2_GpLine(gp_id, gp_move_mode, end_arr, byref(arr_element))
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 (primary) position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 (following) position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpArc_Center

Set group arc center.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set 2D Arc mode
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set 2D Arc CW center, end position
'''
| axis | Arc center | Arc end |
|------|------------|---------|
|   0  |    8000    |  16000  |
|   1  |      0     |    0    |
'''
center_ax_arr = [c_double(8000), c_double(0)]
center_arr = (c_double * len(center_ax_arr))(*center_ax_arr)
end_ax_arr = [c_double(16000), c_double(0)]
end_arr = (c_double * len(end_ax_arr))(*end_ax_arr)
arr_element = c_uint32(len(end_ax_arr))
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
errCde = AdvMot.Acm2_GpArc_Center(gp_id, arc_mode, center_arr, end_arr, byref(arr_element), dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpArc_3P

Set group arc point.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# # Set 2D Arc mode as relative, which the starting point of circular is (0, 0)
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set 2D Arc CW center, end position
'''
| axis | point 1 | end point |
|------|---------|-----------|
| 0(x) |   8000  |   16000   |
| 1(y) |   8000  |     0     |
'''
ref_arr = [c_double(8000), c_double(8000)]
refArr = (c_double * len(ref_arr))(*ref_arr)
end_arr = [c_double(16000), c_double(0)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(ref_arr))
# Set arc movement as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
errCde = AdvMot.Acm2_GpArc_3P(gp_id, arc_mode, refArr, endArr, byref(arr_element), dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpArc_Angle

Set group arc angle.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set 2D Arc mode as relative, which the starting point of circular is (0, 0)
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set center as (20000, 20000)
center_arr = [c_double(20000), c_double(20000)]
centerArr = (c_double * len(center_arr))(*center_arr)
arr_element = c_uint32(len(center_arr))
# Set degree as 45
degree = c_double(45)
# Set arc movement as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
errCde = AdvMot.Acm2_GpArc_Angle(gp_id, arc_mode, centerArr, byref(arr_element), degree, dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_Gp3DArc_Center

Set 3D group arc center.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set 3D Arc mode
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set 3D Arc CW, with 120 degree
'''
| axis | Arc center | Arc end |
|------|------------|---------|
|   0  |    20000   |  20000  |
|   1  |    20000   |  40000  |
|   2  |      0     |  20000  |
'''
center_ax_arr = [c_double(20000), c_double(20000), c_double(0)]
center_arr = (c_double * len(center_ax_arr))(*center_ax_arr)
end_ax_arr = [c_double(20000), c_double(40000), c_double(20000)]
end_arr = (c_double * len(end_ax_arr))(*end_ax_arr)
arr_element = c_uint32(len(end_ax_arr))
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
errCde = AdvMot.Acm2_Gp3DArc_Center(gp_id, arc_mode, center_arr, end_arr, byref(arr_element), dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_Gp3DArc_NormVec

Set 3D group arc norm vector.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set 3D Arc mode
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set direction as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
# Set 3D Arc CW, with 120 degree
'''
| axis | Arc center | Arc end |
|------|------------|---------|
|   0  |    20000   |  20000  |
|   1  |    20000   |  40000  |
|   2  |      0     |  20000  |
'''
center_arr = [c_double(20000), c_double(20000), c_double(0)]
centerArr = (c_double * len(center_arr))(*center_arr)
v1 = np.array([(0-center_arr[0].value), (0-center_arr[1].value), (0-center_arr[2].value)])
arc_end_arr = [c_double(20000), c_double(40000), c_double(20000)]
v2 = np.array([(arc_end_arr[0].value-center_arr[0].value), (arc_end_arr[1].value-center_arr[1].value), (arc_end_arr[2].value-center_arr[2].value)])
cross_product = np.cross(v1, v2)
normalize_cross = cross_product / (center_arr[0].value * center_arr[0].value)
norm_vec_arr = [c_double(normalize_cross[0]), c_double(normalize_cross[1]), c_double(normalize_cross[2])]
normVecArr = (c_double * len(norm_vec_arr))(*norm_vec_arr)
arr_element = c_uint32(len(center_arr))
angle = c_double(120)
errCde = AdvMot.Acm2_Gp3DArc_NormVec(gp_id, arc_mode, centerArr, normVecArr, byref(arr_element), angle, dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_Gp3DArc_3P

Set arc movement with 3 points of circular.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# # Set 3D Arc mode as relative, which the starting point of circular is (0, 0, 0)
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set 3D Arc CW, with 120 degree
'''
| axis | point 1 | end point |
|------|---------|-----------|
| 0(x) |  20000  |   20000   |
| 1(y) |  20000  |   40000   |
| 2(z) |    0    |   20000   |
'''
ref_arr = [c_double(20000), c_double(20000), c_double(0)]
refArr = (c_double * len(ref_arr))(*ref_arr)
end_arr = [c_double(20000), c_double(40000), c_double(20000)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(ref_arr))
# Set direction as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
cyc_cnt = c_uint32(0)
# Set arc movement with 3 points of circular
errCde = AdvMot.Acm2_Gp3DArc_3P(gp_id, arc_mode, refArr, endArr, byref(arr_element), dir_mode, cyc_cnt)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_Gp3DArc_3PAngle

Set 3D group arc points, angle.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# # Set 3D Arc mode as relative, which the starting point of circular is (0, 0, 0)
arc_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set direction as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
# Set 3D Arc CW, with 120 degree
'''
| axis | point 1 | end point |
|------|---------|-----------|
| 0(x) |  20000  |   20000   |
| 1(y) |  20000  |   40000   |
| 2(z) |    0    |   20000   |
'''
ref_arr = [c_double(20000), c_double(20000), c_double(0)]
refArr = (c_double * len(ref_arr))(*ref_arr)
end_arr = [c_double(20000), c_double(40000), c_double(20000)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(ref_arr))
degree = c_double(120)
# Set arc movement with 3 point of circular
errCde = AdvMot.Acm2_Gp3DArc_3PAngle(gp_id, arc_mode, refArr, endArr, byref(arr_element), degree, dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpHelix_Center

Set group helix center.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set mode as relative
helix_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set center as (10000, 0, 0)
center_arr = [c_double(10000), c_double(0), c_double(0)]
centerArr = (c_double * len(center_arr))(*center_arr)
# Set end position as (20000, 0, 20000)
end_arr = [c_double(20000), c_double(0), c_double(20000)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(end_arr))
# Set direction as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
# Set Helix movement
errCde = AdvMot.Acm2_GpHelix_Center(gp_id, helix_mode, centerArr, endArr, byref(arr_element), dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpHelix_3P

Set group helix points.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set mode as relative
helix_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set center as (8000, 0, 0)
center_arr = [c_double(8000), c_double(0), c_double(0)]
centerArr = (c_double * len(center_arr))(*center_arr)
# Set end position as (16000, 16000, 10000)
end_arr = [c_double(16000), c_double(16000), c_double(10000)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(center_arr))
# Set direction as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
# Set Helix movement
errCde = AdvMot.Acm2_GpHelix_3P(gp_id, helix_mode, centerArr, endArr, byref(arr_element), dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpHelix_Angle

Set group helix angle.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
# Set mode as relative
helix_mode = c_uint(ABS_MODE.MOVE_REL.value)
# Set center as (200, 0)
center_arr = [c_double(200), c_double(0), c_double(0)]
centerArr = (c_double * len(center_arr))(*center_arr)
# Set 120 as degree
end_arr = [c_double(4000), c_double(4000), c_double(120)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(center_arr))
# Set direction as CW
dir_mode = c_uint(ARC_DIRECTION.ARC_CW.value)
# Set Helix movement
errCde = AdvMot.Acm2_GpHelix_Angle(gp_id, helix_mode, centerArr, endArr, byref(arr_element), dir_mode)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpResume

Acm2_GpPause

Set group pause motion.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
for idx in range(len_get.value):
# Set mode as relative
move_mode = c_uint(GP_LINE_MODE.LINE_REL.value)
end_arr = [c_double(20000), c_double(20000), c_double(20000)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(end_arr))
errCde = AdvMot.Acm2_GpLine(gp_id, move_mode, endArr, arr_element)
# Pause movement
errCde = AdvMot.Acm2_GpPause(gp_id)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value: Not equal to target position
# Resume movement
errCde = AdvMot.Acm2_GpResume(gp_id)
# Check status
while state.value != AXIS_STATE.STA_AX_READY.value:
    time.sleep(1)
    test_GetAxState()
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value: Equal to target position
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpMotionStop

Stop group motion.

Acm2_GpChangeVel

Change velocity of group.

Acm2_GpChangeVelByRate

Change group velocity by rate.

Acm2_GpGetVel

Get group velocity.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1), c_uint32(2)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1, 2 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
for idx in range(len_get.value):
# Set mode as relative
move_mode = c_uint(GP_LINE_MODE.LINE_REL.value)
end_arr = [c_double(200000), c_double(200000), c_double(200000)]
endArr = (c_double * len(end_arr))(*end_arr)
arr_element = c_uint32(len(end_arr))
errCde = AdvMot.Acm2_GpLine(gp_id, move_mode, endArr, arr_element)
# Check group status
time.sleep(2)
gp_state = c_uint32(0)
errCde = AdvMot.Acm2_GpGetState(gp_id, byref(gp_state))
print('gp_state:0x{0:x}'.format(gp_state.value))
# Change velocity
new_vel = c_double(5000)
new_acc = c_double(9000)
new_dec = c_double(4000)
errCde = AdvMot.Acm2_GpChangeVel(gp_id, new_vel, new_acc, new_dec)
vel_type = c_uint(VELOCITY_TYPE.VELOCITY_CMD.value)
get_gp_vel = c_double(0)
time.sleep(2)
errCde = AdvMot.Acm2_GpGetVel(gp_id, vel_type, byref(get_gp_vel))
print('gp vel:{0}'.format(get_gp_vel.value))
# Set stop mode as deceleration to stop
stop_mode = c_uint(MOTION_STOP_MODE.MOTION_STOP_MODE_DEC.value)
errCde = AdvMot.Acm2_GpMotionStop(gp_id, stop_mode, new_dec)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
get_pos_2 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Get axis 2 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[2], pos_type, byref(get_pos_2))
# Check value: Not equal to target position
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpSetSpeedProfile

Get group speed information.

Acm2_GpGetState

Get group status.

Acm2_GpLoadPath

Load path table in group.

Acm2_GpAddPath

Add path into group.

Acm2_GpMovePath

Start move group after add path.

Acm2_GpResetPath

Reset group path table.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
for idx in range(len_get.value):
# Reset group path
errCde = AdvMot.Acm2_GpResetPath(gp_id)
# Set 2D Arc CW center, end position
'''
| axis | Arc center | Arc end |
|------|------------|---------|
|   0  |    8000    |  16000  |
|   1  |      0     |    0    |
'''
# Set path table
'''
| index | move command | move mode | Vel High | Vel Low | Acc | Dec |   End Point  | Center Point |
|-------|--------------|-----------|----------|---------|-----|-----|--------------|--------------|
|   0   |  Rel2DArcCCW |BUFFER_MODE|   8000   |   1000  |10000|10000|(16000, 16000)| (8000, 8000) |
|   1   |    EndPath   |BUFFER_MODE|     0    |     0   |  0  |  0  |       0      |      0       |
'''
move_cmd_arr = [c_uint32(MOTION_PATH_CMD.Rel2DArcCCW.value), c_uint32(MOTION_PATH_CMD.EndPath.value)]
move_mode = c_uint(PATH_MOVE_MODE_CM2.BUFFER_MODE.value)
fh = [c_double(8000), c_double(0)]
fl = [c_double(1000), c_double(0)]
acc = [c_double(10000), c_double(0)]
dec = [c_double(10000), c_double(0)]
end_arr = [
    [c_double(16000), c_double(16000)], 
    [c_double(0), c_double(0)]
]
center_arr = [
    [c_double(8000), c_double(8000)], 
    [c_double(0), c_double(0)]
]
arr_element = c_uint32(len(end_arr[0]))
for i in range(1):
    endArr = (c_double * len(end_arr[i]))(*end_arr[i])
    centerArr = (c_double * len(center_arr[i]))(*center_arr[i])
    errCde = AdvMot.Acm2_GpAddPath(gp_id, move_cmd_arr[i], move_mode, fh[i], fl[i], acc[i], dec[i], endArr, centerArr, arr_element)
# Start move path
errCde = AdvMot.Acm2_GpMovePath(gp_id)
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Check value: Equal to target position
# Reset group path
errCde = AdvMot.Acm2_GpResetPath(gp_id)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpGetPathStatus

Get group path status.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

gp_ax_arr = [c_uint32(0), c_uint32(1)]
gp_id = c_uint32(0)
gp_arr = (c_uint32 * len(gp_ax_arr))(*gp_ax_arr)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)
# Creat group 0, and set axis 0, 1 into group
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, len(gp_arr))
# get_axes size must be same as len_get
len_get = c_uint32(64)
get_axes = (c_uint32 * len_get.value)()
# Get axes in group 0 and check
errCde = AdvMot.Acm2_GpGetAxesInGroup(gp_id, get_axes, len_get)
for idx in range(len_get.value):
# Reset group path
errCde = AdvMot.Acm2_GpResetPath(gp_id)
# Create path file by path editor inside the Utility
path_bin_file = b'test\\testPath.bin'
'''
| index | move command | move mode | Vel High | Vel Low | Acc | Dec |   End Point  |
|-------|--------------|-----------|----------|---------|-----|-----|--------------|
|   0   |   Rel2DLine  |BUFFER_MODE|   8000   |   1000  |10000|10000|(10000, 10000)|
|   1   |   Rel2DLine  |BUFFER_MODE|   8000   |   1000  |10000|10000|(10000, 10000)|
|   2   |    EndPath   |BUFFER_MODE|     0    |     0   |  0  |  0  |       0      |
'''
cnt = c_uint32(0)
errCde = AdvMot.Acm2_GpLoadPath(gp_id, path_bin_file, byref(cnt))
# Start move path
errCde = AdvMot.Acm2_GpMovePath(gp_id)
path_status = c_uint(0)
errCde = AdvMot.Acm2_GpGetPathStatus(gp_id, byref(path_status))
# Check status
state = c_uint32(0)
state_type = c_uint(AXIS_STATUS_TYPE.AXIS_STATE.value)
AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
while (state.value != AXIS_STATE.STA_AX_READY.value):
    time.sleep(1)
    AdvMot.Acm2_AxGetState(ax_id, state_type, byref(state))
# Get axis 0 position
get_pos_0 = c_double(0)
get_pos_1 = c_double(0)
pos_type = c_uint(POSITION_TYPE.POSITION_CMD.value)
# Get axis 0 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[0], pos_type, byref(get_pos_0))
# Get axis 1 position
errCde = AdvMot.Acm2_AxGetPosition(gp_ax_arr[1], pos_type, byref(get_pos_1))
# Check value: Equal to target position
# Reset group path
errCde = AdvMot.Acm2_GpResetPath(gp_id)
# Reset all axes from group 0
errCde = AdvMot.Acm2_GpCreate(gp_id, gp_arr, 0)

Acm2_GpMoveSelPath

Acm2_GpGetPathIndexStatus

Get group information by the index of path table.

Acm2_GpDelay

Delay group.

Acm2_GpPathDO

Set device do on/off between path.

Acm2_GpPathWaitDI

Wait DI status between path.

Acm2_GpPathWaitForAxis

Wait axis between path.

Acm2_GpLookAheadPath

Acm2_GpLookAheadPathFile

Acm2_ChGetDIBit

Get DI bit by channel.

Acm2_ChSetDOBitByRingNo

Set DO bit by channel, and ring number.

Acm2_ChGetDOBitByRingNo

Get DO bit by ring number, and channel.

Acm2_ChGetDIBitByRingNo

Get DI bit by ring number, and channel.

Acm2_ChSetDOByte

Set DO channel byte.

Acm2_ChGetDOByte

Get DO channel byte.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

# Using this example code after connect AMAX-5057SO
# Check how to start a EtherCAT subdevice by Acm2_DevConnect

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

# Local DO of PCIE1203 is port 0
port_num = c_uint32(1)
start_ch = c_uint32(0)
get_byte_value = [c_uint32(0)] * 8
time.sleep(0.5)
# Get DO byte of 5057SO (0~7)
errCde = AdvMot.Acm2_ChGetDOByte(start_ch, port_num, byref(get_byte_value[0]))
set_byte_value_on = [c_uint32(DO_ONOFF.DO_ON.value)] * 8
set_byte_value_off = [c_uint32(DO_ONOFF.DO_OFF.value)] * 8
set_value_arr_on = (c_uint32 * len(set_byte_value_on))(*set_byte_value_on)
set_value_arr_off = (c_uint32 * len(set_byte_value_off))(*set_byte_value_off)
time.sleep(0.5)
# Set DO byte of 5057SO (0~7)
errCde = AdvMot.Acm2_ChSetDOByte(start_ch, port_num, set_value_arr_on)
time.sleep(1)
# Get DO byte of 5057SO (0~7)
errCde = AdvMot.Acm2_ChGetDOByte(start_ch, port_num, byref(get_byte_value[0]))
time.sleep(0.5)
# Set DO byte of 5057SO (0~7)
errCde = AdvMot.Acm2_ChSetDOByte(start_ch, port_num, set_value_arr_off)

Acm2_ChGetDIByte

Get DI channel byte.

Acm2_ChSetDOByteByRingNo

Set DO byte by ring number.

Acm2_ChGetDOByteByRingNo

Get DO byte by ring number.

Acm2_ChGetDIByteByRingNo

Get DI byte by ring number.

Acm2_ChSetAOData

Set AO data.

Acm2_ChGetAOData

Get AO data.

Acm2_ChSetAODataByRingNo

Set AO data by ring number.

Acm2_ChGetAODataByRingNo

Get AO data by ring number.

Acm2_ChGetAIData

Get AI data.

Acm2_ChGetAIDataByRingNo

Get AI data by ring number.

Acm2_ChGetCntData

Get counter data.

Acm2_ChSetCntData

Set counter data.

Acm2_ChLinkCmpFIFO

Set compare position.

Acm2_ChLinkCmpObject

Link compare do with axis/counter.

Acm2_ChGetLinkedCmpObject

Get compare do linked object.

Acm2_ChEnableCmp

Enable compare channel.

Acm2_ChSetCmpOut

Set compare channel on/off.

Acm2_ChSetCmpDoOut

Set compare on/off.

Acm2_AxGetCmpData

Get compared data by axis.

Acm2_ChGetCmpData

Get compared data by channel.

Acm2_AxSetCmpTable

Set compare table by axis.

Acm2_AxSetCmpAuto

Set auto compare by axis.

Acm2_ChSetCmpAuto

Set auto compare by channel.

Acm2_ChSetCmpBufferData

Set compare buffer.

Acm2_ChSetMultiCmpTable

Set compare table.

Acm2_ChSetMultiCmpBufferData

Set multi compare buffer.

Acm2_ChResetCmpData

Reset compare data.

Acm2_ChGetCmpBufferStatus

Get compared buffer status.

Acm2_ChLinkLatchAxis

Link latch to axis.

Acm2_ChLinkLatchObject

Lift latch to object.

Acm2_ChGetLinkedLatchObject

Get linked latch object.

Acm2_ChTriggerLatch

Trigger latch by channel.

Acm2_AxReadLatchBuffer

Read latch buffer.

Acm2_ChReadLatchBuffer

Read latch buffer by channel.

Acm2_AxGetLatchBufferStatus

Get latch buffer status.

Acm2_ChGetLatchBufferStatus

Get latch buffer status by channel.

Acm2_AxResetLatchBuffer

Reset latch buffer.

Acm2_ChResetLatchBuffer

Reset latch buffer by channel.

Acm2_ChLinkPWMTable

Link PWM with object.

Acm2_ChGetLinkedPWMTable

Get linked PWM Acm2_ChSetPWMTabletable by channel.

Acm2_ChSetPWMTable

Set PWM table by channel.

Acm2_ChLoadPWMTableFile

Loal PWM table file.

Acm2_ChGetPWMTableStatus

Get PWM table status.

Acm2_ChGetExtDriveData

Get external drive data by channel.

Acm2_ChSetExtDriveData

Set external drive data by channel.

Acm2_ChLinkExtDriveObject

Link external drive object.

Acm2_ChGetLinkedExtDriveObject

Get linked external drive object.

Acm2_DevMDaqConfig

Set MDAQ config.

Acm2_DevMDaqGetConfig

Get MDAQ config.

Acm2_DevMDaqStart

Start MDAQ.

Acm2_DevMDaqStop

Stop MDAQ.

Acm2_DevMDaqReset

Reset MDAQ.

Acm2_DevMDaqGetStatus

Get MDAQ status.

Acm2_DevMDaqGetData

Get MDAQ data.

Acm2_GetDSPFrmWareDwnLoadRate

Get FW download rate.

Acm2_DevLoadENI

Download ENI file.

Acm2_DevConnect

Connect subdevices.

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

# eni file can be create by the Utility
eni_path = b'test\\63000000_eni1.xml'
# Motion ring number:0, IO Ring number:1, IORing is SM mode only
ring_no = c_uint32(1)
errCde = AdvMot.Acm2_DevLoadENI(ring_no, eni_path)
# After load eni file, StartFieldbus/Connect to subdevices.
errCde = AdvMot.Acm2_DevConnect(ring_no)
# Set EtherCAT type as position
ecat_type = c_uint(ECAT_ID_TYPE.SUBDEVICE_POS.value)
# SubDevice position 0 is AMAX-5074
sub_dev0 = c_uint32(0)
# SubDevice position 1 is AMAX-5057SO
sub_dev1 = c_uint32(1)
get_sub_dev_state0 = c_uint32(0)
get_sub_dev_state1 = c_uint32(0)
while (get_sub_dev_state0.value != SUB_DEV_STATE.EC_SLAVE_STATE_OP.value) or (get_sub_dev_state1.value != SUB_DEV_STATE.EC_SLAVE_STATE_OP.value):
    # Get AMAX-5074 status
    errCde = AdvMot.Acm2_DevGetSubDeviceStates(ring_no, ecat_type, sub_dev0, byref(get_sub_dev_state0))
    # Get AMAX-5057SO status
    errCde = AdvMot.Acm2_DevGetSubDeviceStates(ring_no, ecat_type, sub_dev1, byref(get_sub_dev_state1))
    time.sleep(0.5)

Acm2_DevDisConnect

Disconnect subdevices

import time
import os
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

# Motion ring number:0, IO Ring number:1, IORing is SM mode only
ring_no0 = c_uint32(0)
ring_no1 = c_uint32(1)
# Disconnect devices
errCde = AdvMot.Acm2_DevDisConnect(ring_no0)
errCde = AdvMot.Acm2_DevDisConnect(ring_no1)

Acm2_DevGetSubDevicesID

Get subdevices id.

Acm2_DevGetMDeviceInfo

Get main device information.

import os
import time
import xml.etree.ElementTree as xml
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ring_no = c_uint32(1)
main_dev_info = ADVAPI_MDEVICE_INFO()
errCde = AdvMot.Acm2_DevGetMDeviceInfo(ring_no, byref(main_dev_info))
print('slave_count:{0}'.format(main_dev_info.slave_count))

Acm2_DevGetSubDeviceInfo

Get subdevice information.

import os
import time
import xml.etree.ElementTree as xml
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

ring_no = c_uint32(1)
# Get subdevice ID
id_type = c_uint(ECAT_ID_TYPE.SUBDEVICE_ID.value)
id_cnt = c_uint32(3)
phys_addr_arr = [0] * id_cnt.value
sub_dev_info_arr = (ADVAPI_SUBDEVICE_INFO_CM2*2)()
id_arr = (c_uint32 * id_cnt.value)()
errCde = AdvMot.Acm2_DevGetSubDevicesID(ring_no, id_type, id_arr, byref(id_cnt))
if os.name == 'nt':
    tree = xml.parse('test\\eni1.xml')
else:
    tree = xml.parse('test/eni1.xml')
idx = 0
# Check value from xml
for subdev in tree.findall('.//Slave'):
    phys_addr = int(subdev.find('Info/PhysAddr').text)
    phys_addr_arr[idx] = phys_addr
    idx += 1
for i in range(id_cnt.value):
    sub_dev_info = ADVAPI_SUBDEVICE_INFO_CM2()
    errCde = AdvMot.Acm2_DevGetSubDeviceInfo(ring_no, c_uint(ECAT_ID_TYPE.SUBDEVICE_POS.value), i, byref(sub_dev_info))

Acm2_DevGetSubDeviceFwVersion

Get subdevice fw information.

Acm2_DevSetSubDeviceID

Set subdevice id.

Acm2_DevSetSubDeviceStates

Set subdevice status.

Acm2_DevGetSubDeviceStates

Get subdevice states.

import os
import time
import xml.etree.ElementTree as xml
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

# eni file can be create by the Utility
if os.name == 'nt':
    eni_path = b'test\\eni1.xml'
else:
    eni_path = b'test/eni1.xml'
# Motion ring number:0, IO Ring number:1, IORing is SM mode only
ring_no = c_uint32(1)
errCde = AdvMot.Acm2_DevLoadENI(ring_no, eni_path)
# After load eni file, StartFieldbus/Connect to subdevices.
errCde = AdvMot.Acm2_DevConnect(ring_no)
# Set EtherCAT type as position
ecat_type = c_uint(ECAT_ID_TYPE.SUBDEVICE_POS.value)
# SubDevice position 0 is AMAX-5074
sub_dev0 = c_uint32(0)
# SubDevice position 1 is AMAX-5057SO
sub_dev1 = c_uint32(1)
get_sub_dev_state0 = c_uint32(0)
get_sub_dev_state1 = c_uint32(0)
while (get_sub_dev_state0.value != SUB_DEV_STATE.EC_SLAVE_STATE_OP.value) or (get_sub_dev_state1.value != SUB_DEV_STATE.EC_SLAVE_STATE_OP.value):
    # Get AMAX-5074 status
    errCde = AdvMot.Acm2_DevGetSubDeviceStates(ring_no, ecat_type, sub_dev0, byref(get_sub_dev_state0))
    # Get AMAX-5057SO status
    errCde = AdvMot.Acm2_DevGetSubDeviceStates(ring_no, ecat_type, sub_dev1, byref(get_sub_dev_state1))
    time.sleep(0.5)

Acm2_DevWriteSDO

Write data by SDO.

Acm2_DevReadSDO

Read data by SDO.

Acm2_DevWritePDO

Write data by PDO.

Acm2_DevReadPDO

Read data by PDO.

import os
import time
import xml.etree.ElementTree as xml
from ctypes import *
from AcmP.AdvCmnAPI_CM2 import AdvCmnAPI_CM2 as AdvMot
from AcmP.AdvMotApi_CM2 import *
from AcmP.AdvMotDrv import *
from AcmP.AdvMotPropID_CM2 import PropertyID2

dev_list = (DEVLIST*10)()
out_ent = c_uint32(0)
errCde = c_uint32(0)
# Get Available
errCde = AdvMot.Acm2_GetAvailableDevs(dev_list, 10, byref(out_ent))
# Initial device
errCde = AdvMot.Acm2_DevInitialize()

# Ring as IO Ring
ring_no = c_uint32(1)
# set by position
id_type = c_uint(ECAT_ID_TYPE.SUBDEVICE_POS.value)
sub_dev_pos = c_uint32(1)
# AMAX-5057SO 0x3101:01 is DO(0)
pdo_idx = c_uint32(0x3101)
pdo_sub_idx = c_uint32(0x01)
# DO(0) data type is boolean
pdo_type = c_uint32(ECAT_TYPE.ECAT_TYPE_BOOL.value)
pdo_data_size = c_uint32(sizeof(c_bool))
val_on = c_bool(1)
val_off = c_bool(0)
get_value = c_bool(0)
# Set DO(0) on by PDO
errCde = AdvMot.Acm2_DevWritePDO(ring_no, id_type, sub_dev_pos, pdo_idx, pdo_sub_idx, pdo_type, pdo_data_size, byref(val_on))
# Get DO(0) value by PDO
errCde = AdvMot.Acm2_DevReadPDO(ring_no, id_type, sub_dev_pos, pdo_idx, pdo_sub_idx, pdo_type, pdo_data_size, byref(get_value))
# Set DO(0) off by PDO
errCde = AdvMot.Acm2_DevWritePDO(ring_no, id_type, sub_dev_pos, pdo_idx, pdo_sub_idx, pdo_type, pdo_data_size, byref(val_off))
# Get DO(0) value by PDO
errCde = AdvMot.Acm2_DevReadPDO(ring_no, id_type, sub_dev_pos, pdo_idx, pdo_sub_idx, pdo_type, pdo_data_size, byref(get_value))

Acm2_DevWriteReg

Write data by reg.

Acm2_DevReadReg

Read data by reg.

Acm2_DevReadSubDeviceCommErrCnt

Read subdevice communication error counter.

Acm2_Ax1DCompensateTable

Set compensate table with one axis.

Acm2_Ax2DCompensateTable

Set compensate table in 2D.

Acm2_AxZAxisCompensateTable

Set compensate table in Z axis.

Acm2_AxGetCompensatePosition

Get compensate position by axis.

Acm2_DevOscChannelDataStart

Start Osc. channel data.

Acm2_DevOscChannelDataStop

Stop Osc. channel data.

Acm2_DevGetOscChannelDataConfig

Get config of Osc. channel.

Acm2_DevSetOscChannelDataConfig

Set config of Osc. channel.

Acm2_DevGetOscChannelData

Get Osc. channel data.

Acm2_DevGetOscChannelStatus

Get Osc. channel status.