Adafruit-SHT31 1.0.2

Python Library for Adafruit SHT31 module

# Adafruit_Python_SHT31

This Python driver allows you to read data from the [Adafruit SHT31D Breakout](https://www.adafruit.com/products/2857) on a Raspberry Pi, Pi2 or similar device.

## Requirements

This driver requires that you have previously installed the [Adafruit_Python_GPIO](https://github.com/adafruit/Adafruit_Python_GPIO) package.

On Raspbian, you can install this package with the following commands:

` sudo apt-get update sudo apt-get install build-essential python-pip python-dev python-smbus git git clone https://github.com/adafruit/Adafruit_Python_GPIO.git cd Adafruit_Python_GPIO sudo python setup.py install `

## Usage

To read a single set of data points from the SHT31, connect your Pi or Pi2 to the SHT31D breakout using I2C (connect SCL0/1 to the SCK pin and SCL0/1 to the SDI pin), and run the following command from this folder:

` python Adafruit_SHT31_Example.py `

## Credits

This driver is based on the [Adafruit_BME280](https://github.com/adafruit/Adafruit_Python_BME280) driver by Tony DiCola (Adafruit Industries), with BME280 additions kindly provided by David J. Taylor (www.satsignal.eu). Modified for use with SHT31D by Ralf Mueller, (www.bj-ig.de)

# MIT License

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.