This library provides a framework to write device drivers for the raspberry pi that are connected to MQTT.
Project description
In Greek mythology, Copreus (Κοπρεύς) was King Eurystheus’ herald. He announced Heracles’ Twelve Labors. [wiki]
This library provides a framework to write a device driver for the raspberry pi that are connected to MQTT.
Thus, Copreus takes commands from the king (MQTT) and tells the hero (device) what it labors are. Further, Copreus reports to the king whatever the hero has to tell him.
Copreus is part of the collection of mqtt based microservices pelops. An overview on the microservice architecture and examples can be found at (http://gitlab.com/pelops/pelops).
For Users
Installation Core-Functionality
Prerequisites for the core functionality are:
sudo apt install python3 python3-pip sudo pip3 install RPi.GPIO pelops
Install via pip:
sudo pip3 install copreus
To update to the latest version add --upgrade as prefix to the pip3 line above.
Install via gitlab (might need additional packages):
git clone git@gitlab.com:pelops/copreus.git cd copreus sudo python3 setup.py install
This will install the following shell scripts: * copreus - alias for copreus_drivermanager * `copreus_drivermanager <https://gitlab.com/pelops/copreus/wikis/devicemanager-devicemanager>`__ - driver manager can instantiate several driver * `copreus_adc <https://gitlab.com/pelops/copreus/wikis/drivers-adc>`__ - analog digital converter via spi * `copreus_bme280 <https://gitlab.com/pelops/copreus/wikis/Drivers-bme_280>`__ - bosch bme280 sensor via SMBus * `copreus_dac <https://gitlab.com/pelops/copreus/wikis/drivers-dac>`__ - digital analog converter via spi * `copreus_dht <https://gitlab.com/pelops/copreus/wikis/drivers-dht>`__ - DHT11/DHT22/AM2302 * `copreus_epaperdirect <https://gitlab.com/pelops/copreus/wikis/drivers-epaperdirect>`__ - Waveshare e-Papers 1.54inch/2.13inch/2.9inch via spi - * `copreus_epapersimple <https://gitlab.com/pelops/copreus/wikis/drivers-epapersimple>`__ - Waveshare e-Papers 1.54inch/2.13inch/2.9inch via spi * `copreus_input <https://gitlab.com/pelops/copreus/wikis/drivers-input>`__ - generic gpio input * `copreus_output <https://gitlab.com/pelops/copreus/wikis/drivers-output>`__ - generic gpio output * `copreus_rotaryencoder <https://gitlab.com/pelops/copreus/wikis/drivers-rotaryencoder>`__ - rotary encoder like ky-040 with software solutions for debouncing and direction detection. * `copreus_rotaryencoder2 <https://gitlab.com/pelops/copreus/wikis/drivers-rotaryencoder2>`__ - rotary encoder like ky-040 together with schmitttriggers for debouncing and a flipflop for direction detection in hardware.
The script cli arguments are: * ‘-c’/’–config’ - config file (mandatory) * ‘–version’ - show the version number and exit
Additional Prerequisites for Drivers
Some drivers like Input and Output don’t need additional packages. The others need additional prerequisites to be used (they will be installed without them).
ADC and DAC
sudo pip3 install spidev
bme280
sudo pip3 install smbus2 RPi.bme280
DHT
sudo apt install build-essential python-dev git clone https://github.com/adafruit/Adafruit_Python_DHT.git cd Adafruit_Python_DHT sudo python3 setup.py install
epaperdirect
sudo apt install libopenjp2-7 libtiff5 sudo pip3 install spidev Pillow
epapersimple
sudo apt install libopenjp2-7 libtiff5 sudo pip3 install spidev Pillow
Install Everything at Once
sudo apt install python3 python3-pip build-essential python-dev libopenjp2-7 libtiff5 sudo pip3 install RPi.GPIO paho-mqtt pyyaml spidev Pillow smbus2 RPi.bme280 pelops git clone https://github.com/adafruit/Adafruit_Python_DHT.git cd Adafruit_Python_DHT sudo python3 setup.py install cd .. sudo pip3 install copreus
Further ubuntu and python packages may be needed by example and tests. For example, test_epaper.py requires that the ubuntu package fonts-freefont-ttf is installed.
YAML-Config
A yaml file must contain two root blocks: * mqtt - mqtt-address, mqtt-port, and path to credentials file credentials-file (a file consisting of two entries: mqtt-user, mqtt-password) * logger - logger configuration. log level and output file. * driver or drivers. drivers is a list of driver entries with two additional parameters per driver: active and name. a driver entry contains at least (driver implementation might add additional ones): type, name, topic-pub (list of key/value pairs), and topic-sub (list of key/value pairs).
Currently, pyyaml is yaml 1.1 compliant. In pyyaml On/Off and Yes/No are automatically converted to True/False. This is an unwanted behavior and deprecated in yaml 1.2. In copreus this autoconversion is removed. Thus, On/Off and Yes/No are read from the yaml file as strings (see module baseclasses.myconfigtools).
Examples
Config for Driver Input
Can be started with copreus_input -c config.yaml -v. More information in the wiki.
config.yaml:
mqtt: mqtt-address: localhost mqtt-port: 1883 credentials-file: ~/credentials.yaml log-level: INFO logger: log-level: DEBUG log-file: copreus.log driver: type: input pin: 23 topics-pub: button_pressed: /test/button/pressed button_state: /test/button/state mqtt-translations: button_pressed: PRESSED button_state-open: OPEN button_state-closed: CLOSED
credentials.yaml:
mqtt: mqtt-user: user mqtt-password: password
Config for DriverManager
Can be started with copreus -c config.yaml -v. More information at wiki, wiki, and wiki.
config.yaml:
mqtt: mqtt-address: localhost mqtt-port: 1883 credentials-file: ~/credentials.yaml log-level: INFO logger: log-level: DEBUG log-file: copreus.log drivers: - name: button1 type: input pin: 23 topics-pub: button_pressed: /test/button/pressed button_state: /test/button/state mqtt-translations: button_pressed: PRESSED button_state-open: OPEN button_state-closed: CLOSED active: true - name: led1 type: output pin: 21 initially-closed: false physical-closed: low topics-sub: closed: /test/closed mqtt-translations: closed-true: ON closed-false: OFF active: false
credentials.yaml:
mqtt: mqtt-user: user mqtt-password: password
systemd
add systemd example.
For Developers
Getting Started
The project consists of three main packages: * baseclasses - ADriver and additional base- and utilityclasses * drivermanager - DriverManager and DriverFactory * drivers - all implemented driver
Each driver must be a silbiling of ADriver. A new driver must be added to the DriverFactory, drivers.__init__.py, setup.py and README.md. Further, config example must be placed in /tests.
A good starting point is to look at the two generic driver Ìnput and Output as well as DHT.
Additional Dependencies
Next to the dependencies listed above, you need to install the following:
sudo apt install pandoc sudo pip3 install pypandoc
Todos
Add more driver
SMBus base class
…
Misc
The code is written for python3 (and tested with python 3.5 on an Raspberry Pi Zero with Raspbian Stretch).
Merge requests / bug reports are always welcome.
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
File details
Details for the file Copreus-0.3.18.tar.gz
.
File metadata
- Download URL: Copreus-0.3.18.tar.gz
- Upload date:
- Size: 49.6 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: Python-urllib/3.6
File hashes
Algorithm | Hash digest | |
---|---|---|
SHA256 | b89e48d76959ceb311bb00b4035bb25d540de2da2a6c1508ea9d319549458ef0 |
|
MD5 | d98c19c0c5d39ee8b6cb0126e2283431 |
|
BLAKE2b-256 | d3b2d74fb8a34ebb8c0ff6b5a422e2a93b7ecd8d1ed8230edd24e6f0e8bf8b2c |