Eurydike 0.1.1

Installation Core-Functionality

Prerequisites for the core functionality are:

sudo apt install python3 python3-pip
sudo pip3 install paho-mqtt pyyaml pelops

Install via pip:

sudo pip3 install eurydike

To update to the latest version add --upgrade as prefix to the pip3 line above.

Install via gitlab (might need additional packages):

git clone git@gitlab.com:pelops/eurydike.git
cd eurydike
sudo python3 setup.py install

This will install the following shell scripts: * eurydike

The script cli arguments are: * ‘-c’/’–config’ - config file (mandatory) * ‘-v’ - verbose output (optional) * ‘–version’ - show the version number and exit

YAML-Config

A yaml [1] file must contain four root blocks: * mqtt - mqtt-address, mqtt-port, and path to credentials file mqtt-credentials (a file consisting of two entries: mqtt-user, mqtt-password) * logger - which log level and which file to be used * eventdetectors - parameters for the controller and the embedded pid

mqtt:
    mqtt-address: localhost
    mqtt-port: 1883
    mqtt-credentials: ~/credentials.yaml
    log-level: INFO

logger:
    log-level: DEBUG  # DEBUG, INFO, WARNING, ERROR, CRITICAL
    log-file: test_eurydike.log

eventdetectors:
    - name: above  # unqiue name for event detector
      type: onthreshold  # detector type identifier
      comparator: gt  # GREATERTHAN/GT/>, LOWERTHAN/LT/<, EQUALTO/==
      threshold: 7  # threshold in combintation with comparator and value from topic-sub
      topic-sub: /test/value
      topic-pub: /test/above
      responses:  # leave value empty or remove line for no response
#          on-violation: event_detected  # on detection of a threshold violation send this value to topic-pub
          on-restoration: event_ended  # on the event of returning to valid values send this value to topic-pub
      active: False  # entry ignored if set to False

    - name: below  # unqiue name for event detector
      type: onthreshold  # detector type identifier
      comparator: lowerthan  # GREATERTHAN/GT/>, LOWERTHAN/LT/<, EQUALTO/==
      threshold: 7  # threshold in combintation with comparator and value from topic-sub
      topic-sub: /test/value
      topic-pub: /test/below
      responses:  # leave value empty or remove line for no response
          on-violation: event_detected  # on detection of a threshold violation send this value to topic-pub
          on-restoration: event_ended  # on the event of returning to valid values send this value to topic-pub
      active: True  # entry ignored if set to False

    - name: equal  # unqiue name for event detector
      type: onthreshold  # detector type identifier
      comparator: ==  # GREATERTHAN/GT/>, LOWERTHAN/LT/<, EQUALTO/==
      threshold: 7  # threshold in combintation with comparator and value from topic-sub
      topic-sub: /test/value
      topic-pub: /test/equal
      responses:  # leave value empty or remove line for no response
          on-violation: event_detected  # on detection of a threshold violation send this value to topic-pub
          on-restoration:  # on the event of returning to valid values send this value to topic-pub
      active: False  # entry ignored if set to False

    - name: outside  # unqiue name for event detector
      type: onband  # detector type identifier
      upper-threshold: 8  # upper threshold for on band detection
      lower-threshold: 7  # lower threshold for on band detection
      topic-sub: /test/value
      topic-pub: /test/band
      responses:  # leave value empty or remove line for no response
          on-violation: event_detected  # on detection of a threshold violation send this value to topic-pub
          on-restoration: event_ended  # on the event of returning to valid values send this value to topic-pub
      active: True  # entry ignored if set to False

systemd

• add systemd example.

Getting Started

The project consists of two main modules:

• eventdetectionmanager - manages all configured event detectors

• abstracteventdetector - base class for all event detectors

Todos

• … ?

Misc

The code is written for python3 (and tested with python 3.5 on an Raspberry Pi Zero with Raspbian Stretch).

Merge requests / bug reports are always welcome.