Skip to main content

The snappy web interface for your 3D printer

Project description

OctoPrint

GitHub release Travis build status Discourse topics IRC Twitter Follow

OctoPrint provides a snappy web interface for controlling consumer 3D printers. It is Free Software and released under the GNU Affero General Public License V3.

Its website can be found at octoprint.org.

The community forum is available at community.octoprint.org.

The official IRC channel is #octoprint on freenode. Its logs can be found here.

The FAQ can be accessed by following faq.octoprint.org.

The documentation is located at docs.octoprint.org.

The official plugin repository can be reached at plugins.octoprint.org.

OctoPrint's development wouldn't be possible without the financial support by its community. If you enjoy OctoPrint, please consider becoming a regular supporter!

Screenshot

You are currently looking at the source code repository of OctoPrint. If you already installed it (e.g. by using the Raspberry Pi targeted distribution OctoPi) and only want to find out how to use it, the documentation and the public wiki might be of more interest for you. You might also want to subscribe to join the community forum at community.octoprint.org where there are other active users who might be able to help you with any questions you might have.

Contributing

Contributions of all kinds are welcome, not only in the form of code but also with regards to the official documentation or the public wiki, debugging help in the bug tracker, support of other users on the community forum at community.octoprint.org and also financially.

If you think something is bad about OctoPrint or its documentation the way it is, please help in any way to make it better instead of just complaining about it -- this is an Open Source Project after all :)

For information about how to go about submitting bug reports or pull requests, please see the project's Contribution Guidelines.

Installation

Installation instructions for installing from source for different operating systems can be found on the wiki.

If you want to run OctoPrint on a Raspberry Pi, you might want to take a look at OctoPi which is a custom SD card image that includes OctoPrint plus dependencies.

The generic steps that should basically be done regardless of operating system and runtime environment are the following (as regular user, please keep your hands off of the sudo command here!) - this assumes you already have Python 2.7, 3.6 or 3.7, pip and virtualenv set up on your system:

  1. Checkout OctoPrint: git clone https://github.com/foosel/OctoPrint.git
  2. Change into the OctoPrint folder: cd OctoPrint
  3. Create a user-owned virtual environment therein: virtualenv venv if your system default python version is python 2.7, otherwise you need to specify the version explicitly, e.g. virtualenv --python=python2.7 venv.
  4. Install OctoPrint into that virtual environment: ./venv/bin/pip install .

You may then start the OctoPrint server via /path/to/OctoPrint/venv/bin/octoprint, see Usage for details.

After installation, please make sure you follow the first-run wizard and set up access control as necessary.

Dependencies

OctoPrint depends on a few python modules to do its job. Those are automatically installed when installing OctoPrint via pip:

pip install .

You should do this every time after pulling from the repository, since the dependencies may have changed.

OctoPrint currently supports Python 2.7, 3.6 and 3.7.

Usage

Running the pip install via

pip install .

installs the octoprint script in your Python installation's scripts folder (which, depending on whether you installed OctoPrint globally or into a virtual env, will be in your PATH or not). The following usage examples assume that the octoprint script is on your PATH.

You can start the server via

octoprint serve

By default it binds to all interfaces on port 5000 (so pointing your browser to http://127.0.0.1:5000 will do the trick). If you want to change that, use the additional command line parameters host and port, which accept the host ip to bind to and the numeric port number respectively. If for example you want the server to only listen on the local interface on port 8080, the command line would be

octoprint serve --host=127.0.0.1 --port=8080

Alternatively, the host and port on which to bind can be defined via the config file.

If you want to run OctoPrint as a daemon (only supported on Linux), use

octoprint daemon {start|stop|restart} [--pid PIDFILE]

If you do not supply a custom pidfile location via --pid PIDFILE, it will be created at /tmp/octoprint.pid.

You can also specify the config file or the base directory (for basing off the uploads, timelapse and logs folders), e.g.:

octoprint serve --config /path/to/another/config.yaml --basedir /path/to/my/basedir

To start OctoPrint in safe mode - which disables all third party plugins that do not come bundled with OctoPrint - use the --safe flag:

octoprint serve --safe

See octoprint --help for more information on the available command line parameters.

OctoPrint also ships with a run script in its source directory. You can invoke it to start the server. It takes the same command line arguments as the octoprint script.

Configuration

If not specified via the command line, the config file config.yaml for OctoPrint is expected in the settings folder, which is located at ~/.octoprint on Linux, at %APPDATA%/OctoPrint on Windows and at ~/Library/Application Support/OctoPrint on MacOS.

A comprehensive overview of all available configuration settings can be found in the docs. Please note that the most commonly used configuration settings can also easily be edited from OctoPrint's settings dialog.

Special Thanks

Cross-browser testing services are kindly provided by BrowserStack.

Profiling is done with the help of PyVmMonitor.

Error tracking is powered and sponsored by Sentry.

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

OctoPrint-1.4.0rc6.tar.gz (3.0 MB view details)

Uploaded Source

Built Distribution

OctoPrint-1.4.0rc6-py2.py3-none-any.whl (3.3 MB view details)

Uploaded Python 2 Python 3

File details

Details for the file OctoPrint-1.4.0rc6.tar.gz.

File metadata

  • Download URL: OctoPrint-1.4.0rc6.tar.gz
  • Upload date:
  • Size: 3.0 MB
  • Tags: Source
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/1.13.0 pkginfo/1.5.0.1 requests/2.22.0 setuptools/40.0.0 requests-toolbelt/0.8.0 tqdm/4.35.0 CPython/2.7.14

File hashes

Hashes for OctoPrint-1.4.0rc6.tar.gz
Algorithm Hash digest
SHA256 d414815341a196931a03c2b484b077a032209cf2da6b9520bf658f3c5450fa99
MD5 9cb5a7784a285434b84187f58e9bda56
BLAKE2b-256 f8c02b349e2eec75a9f0eb952d6150223b29e878270d67059c707cdb1a056b4f

See more details on using hashes here.

File details

Details for the file OctoPrint-1.4.0rc6-py2.py3-none-any.whl.

File metadata

  • Download URL: OctoPrint-1.4.0rc6-py2.py3-none-any.whl
  • Upload date:
  • Size: 3.3 MB
  • Tags: Python 2, Python 3
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/1.13.0 pkginfo/1.5.0.1 requests/2.22.0 setuptools/40.0.0 requests-toolbelt/0.8.0 tqdm/4.35.0 CPython/2.7.14

File hashes

Hashes for OctoPrint-1.4.0rc6-py2.py3-none-any.whl
Algorithm Hash digest
SHA256 1e0d952b57f6076c32235840f9b01ca6078c4d4f9257f210253d54e6e27ca973
MD5 fa74614ceda751d01deb3c9c9173a012
BLAKE2b-256 13b64093df2f09dc07c8652715c790897673bec7b7f08e9a97493f67b1500d1e

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page