PyHaier 0.2.8

Very simple library to manipulate the basic parameters of the Haier heat pump.

PyHaier

Very simple (for now) library to manipulate the basic parameters of the Haier heat pump.

Donation

If you like My work and want to support me, you can:

Or if you from Poland:

Support

For support, join our Discord channel https://discord.gg/7aF38puD

Contributors

• Daniel Mentel he found all information from functions added in 0.2.1 and 0.2.2 version

Version

0.2.8

• few more fix

0.2.7

• one more fix

0.2.6

• fix function name

0.2.5

• add GetPump function to show if buildin pump is on or off
• add Get3way function to show what position the 3-way valve is in

0.2.4

• some fixes

0.2.3

• use divmod

0.2.2

• add GetTdTs function showing Td and Ts parameters as array
• add GetPdPs function showing current and set Pd parameter (for now only Pd) as array
• add GetFanRpm function showing Fan1 and Fan2 rpm, as array
• add GetTao function showwing ambient temperatura
• rename GetCompFreq function to GetCompInfo and add to this function other information like temperature, voltage and current about compressor, display as array

0.2.1

• add GetCompFreq function showing current and set compressor frequency
• add GetArchError function showing three archive errors as array
• add GetEEVLevel function showing current EEV opening level

0.2.0

• rename 'silent' to 'quiet' in GetMode and SetMode function to be consistent with haier nomenclature

0.1.9

• fix for SetState. Now turning on/off emulate "leaf" button on YR-e27

0.1.8

• fix for previous fix :D

0.1.7

• fix turning on pump in SetState function

0.1.6

• Just for pip upload

0.1.5

• More error handling

0.1.4

• Update in error handling

0.1.3

New function

• Add function to read Compressor frequency

0.1.2

New function:

• Get value of Twi and Two parameters (not 100% sure if this is OK.)

0.1.1

New function:

• Get current DHW tank temperature

0.1.0

Basic function:

• Get current state
• Get current mode
• Get current Heating temperature
• Get current DHW temperature
• Set state
• Set mode
• Set Heating temperature
• Set DHW temperature

Tested with

1. AU082FYCRA(HW)
2. AU162FYCRA(HW)

However, it should work with all pumps that feature the YR-e27 remote control

Instalation

Install from pip

$ pip install PyHaier

Install from source

$ git clone https://github.com/ktostam/PyHaier.git
$ cd PyHaier
$ python setup.py install

Usage

PyHaier.GetState(payload)

Display current state (Cool/Heat/Tank/Cool+Tank/Heat+Tank/Off).

You need provide payload for GetState function. payload is the contents of holding registers 101-106

---

PyHaier.GetMode(payload)

Display current Mode (ECO/Silent/Turbo).

You need provide payload for GetMode function. payload is the contents of holding register 201

---

PyHaier.GetCHTemp(payload)

Display current water temperature with precision 0.5°C

You need provide payload for GetMode function. payload is the contents of holding registers 101-106

---

PyHaier.GetDHWTemp(payload)

Display current DHW temperature with precision 1°C

You need provide payload for GetMode function. payload is the contents of holding registers 101-106

---

PyHaier.GetDHWCurTemp(payload)

Display current DHW temperature in Tank with precision 0.1°C

You need provide payload for GetDHWCurTemp function. payload is the contents of holding registers 141-156

---

PyHaier.GetTwiTwo(payload)

Display Twi and Two parameters with precision 0.1°C, output is an array

You need provide payload for GetTwiTwo function. payload is the contents of holding registers 141-156

---

PyHaier.SetState(current,new)

Create Modbus frame to set new pump state

You need provide payload for SetState function. payload is the contents of holding registers 101-106

new can be:

• off
• on
• C for Cool
• H for Heat
• T for Tank
• CT for Cool+Tank
• HT for Heat+Tank

---

PyHaier.SetMode(new)

Set mode (eco/silent/turbo).

You need provide new for SetMode function. new can be:

• eco
• silent
• turbo

---

PyHaier.SetCHTemp(current, new)

Set water temperature with precision 0.5°C

You need provide current for SetCHTemp function. current is the contents of holding registers 101-106

new is new temperature with precision 0.5°C

---

PyHaier.SetDHWTemp(current, new)

Set DHW temperature with precision 1°C

You need provide current for SetDHWTemp function. current is the contents of holding registers 101-106

new is new temperature with precision 1°C

---

PyHaier.GetCompFreq(payload)

Display set and actual compressor frequency, output is an array

You need provide payload for GetCompFreq function. payload is the contents of holding registers 241-261

---

PyHaier.GetArchError(payload)

Display archve error codes, output is an array

You need provide payload for GetArchError function. payload is the contents of holding registers 241-261

---

PyHaier.GetEEVLevel(payload)

Display actual EEV opening level

You need provide payload for GetEEVLevel function. payload is the contents of holding registers 241-261

Example script 1

from pymodbus.client.sync import ModbusSerialClient
import PyHaier

# Serial setting
client = ModbusSerialClient(method = "rtu", port="/dev/ttyAMA0", stopbits=1, bytesize=8, parity='E', baudrate=9600)

# connect to serial
client.connect()

#read holding registers from 101 to 106
payload=client.read_holding_registers(101, 6, unit=17)
state=PyHaier.GetState(payload.registers)
htemp=PyHaier.GetCHTemp(payload.registers)
dhwtemp=PyHaier.GetDHWTemp(payload.registers)
payload=client.read_holding_registers(201, 1, unit=17)
mode=PyHaier.GetMode(payload.registers)
client.close()
print("Pump status:\t"+state+"\nPump mode:\t"+mode+"\nWater temp:\t"+str(htemp)+"\nDHW temp:\t"+str(dhwtemp))

Output

$ python script.py
Pump status:	Heat+Tank ON
Pump mode:	silent
Water temp:	25.0
DHW temp:	43.0

Example script 2

from pymodbus.client.sync import ModbusSerialClient
import PyHaier

# Serial setting
client = ModbusSerialClient(method = "rtu", port="/dev/ttyAMA0", stopbits=1, bytesize=8, parity='E', baudrate=9600)

# connect to serial
client.connect()

#read holding registers from 101 to 106
payload=client.read_holding_registers(101, 6, unit=17)
state=PyHaier.GetState(payload.registers)
print("Current state:\t"+state)
new=PyHaier.SetState(payload.registers,"CT")
client.write_registers(101, new , unit=17)
payload=client.read_holding_registers(101, 6, unit=17)
state=PyHaier.GetState(payload.registers)
print("New state:\t"+state)
client.close()

Output

$ python script.py
Current stete:	Heat+Tank ON
New state:	Cool+Tank ON

License

GNU GPL ©Jacek Brzozowski