No project description provided

Navigation

Verified details

These details have been verified by PyPI
Maintainers
Avatar for phamquiluan from gravatar.com phamquiluan

Unverified details

These details have not been verified by PyPI

Project description

๐Ÿ•ต๏ธ Root Cause Analysis for Microservices based on Causal Inference: How Far Are We?

DOI pypi package CircleCI Build and test Upload Python Package

This repository includes artifacts for reuse and reproduction of experimental results presented in our ASE'24 paper titled "Root Cause Analysis for Microservices based on Causal Inference: How Far Are We?".

Table of Contents

Prerequisites

We recommend using machines equipped with at least 8 cores, 16GB RAM, and ~30GB available disk space with Ubuntu 22.04 and Python3.10 to stably reproduce the experimental results in our paper.

Installation

The default environment, are used for most methods, can be easily installed as follows. We require Ubuntu and Python 3.10 to reproduce our results stably. Detailed installation instructions for all methods are in SETUP.md.

Open your terminal and run the following commands

sudo apt update -y
sudo apt install -y build-essential \
  libxml2 libxml2-dev zlib1g-dev \
  python3-tk graphviz

Clone RCAEval from GitHub

git clone https://github.com/phamquiluan/RCAEval.git && cd RCAEval

Create virtual environment

python3.10 -m venv env
. env/bin/activate

Install RCAEval using pip

pip install pip==20.0.2
pip install -e .[default]

Or, install RCAEval from PyPI

# Install RCAEval from PyPI
pip install pip==20.0.2
pip install RCAEval[default]

Test the installation

pytest tests/test.py::test_basic

Expected output after running the above code (it takes less than 1 minute)

$ pytest tests/test.py::test_basic
============================== test session starts ===============================
platform linux -- Python 3.10.12, pytest-7.3.1, pluggy-1.0.0
rootdir: /home/ubuntu/RCAEval
plugins: dvc-2.57.3, hydra-core-1.3.2
collected 1 item                                                                 

tests/test.py .                                                            [100%]

=============================== 1 passed in 3.16s ================================

How-to-use

Data format

The data must be a pandas.DataFrame that consists of multivariate time series metrics data. We require the data to have a column named time that stores the timestep. Each other column stores a time series for metrics data with the name format of <service>_<metric>. For example, the column cart_cpu stores the CPU utilization of service cart. A sample of valid data could be downloaded using the download_data() method that we will demonstrate shortly below.

Basic usage example

RCAEval stores all the RCA methods in the e2e module (implemented in RCAEval.e2e). A basic example to use BARO, an RCA baseline, to perform RCA are presented as follows,

# You can put the code here to a file named test.py
from RCAEval.e2e import baro
from RCAEval.utility import download_data, read_data

# download a sample data to data.csv
download_data()

# read data from data.csv
data = read_data("data.csv")
anomaly_detected_timestamp = 1692569339

# perform root cause analysis
root_causes = baro(data, anomaly_detected_timestamp)["ranks"]

# print the top 5 root causes
print("Top 5 root causes:", root_causes[:5])

Expected output after running the above code (it takes around 1 minute)

$ python test.py
Downloading data.csv..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 570k/570k [00:00<00:00, 19.8MiB/s]
Top 5 root causes: ['emailservice_mem', 'recommendationservice_mem', 'cartservice_mem', 'checkoutservice_latency', 'cartservice_latency']

Reproducibility

Reproduce RQ1 - Causal Discovery Performance

We provide a script named rq1.py to assist in reproducing the RQ1 results from our paper. This script can be executed using Python with the following syntax:

python rq1.py [-h] [--dataset] [--method] [--length LENGTH] [--test]

The available options and their descriptions are as follows:

options:
  -h, --help            Show this help message and exit
  --dataset             Choose a dataset. Valid options:
                        [circa10, circa50, rcd10, rcd50, causil10, causil50]
  --method METHOD       Choose a method (e.g. `pc`, `fci`, etc.)
  --length LENGTH       Specify the length of the time series (used for RQ4)
  --test                Perform smoke test on certain methods without fully run

For example, in Table 3, PC achieves F1, F1-S, and SHD scores of 0.49, 0.65, and 16 on the CIRCA 10 dataset. To reproduce these results, you can run the following commands:

python rq1.py --dataset circa10 --method pc

The expected output should be exactly as presented in the paper (it takes less than 1 minute to run the code)

F1:   0.49
F1-S: 0.65
SHD:  16
Avg speed: 0.08

We can replace the pc method with other methods (e.g., fci, granger) and substitute circa10 with other datasets to replicate the corresponding results shown in Table 3. This reproduction process is also integrated into our Continuous Integration (CI) setup. For more details, refer to the .github/workflows/reproduce-rq1.yml file.

Reproduce RQ2 - Root Cause Analysis Performance

We provide a script named rq2.py to assist in reproducing the RQ2 results from our paper. This script can be executed using Python with the following syntax:

python rq2.py [-h] [--dataset] [--method] [--tbias TBIAS] [--length LENGTH] [--test]

The available options and their descriptions are as follows:

options:
  -h, --help            Show this help message and exit
  --dataset             Choose a dataset. Valid options:
                        [online-boutique, sock-shop-1, sock-shop-2, train-ticket,
                         circa10, circa50, rcd10, rcd50, causil10, causil50]
  --method METHOD       Choose a method (e.g. `nsigma`, `baro`, etc.)
  --tdelta              Specify $t_delta$ to simulate delay in anomaly detection
  --length LENGTH       Specify the length of the time series (used for RQ4)
  --test                Perform smoke test on certain methods without fully run

For example, in Table 5, BARO [ $t_\Delta = 0$ ] achieves Avg@5 of 0.97, 1, 0.91, 0.98, and 0.67 for CPU, MEM, DISK, DELAY, and LOSS fault types on the Online Boutique dataset. To reproduce these results, you can run the following commands:

python rq2.py --dataset online-boutique --method baro

The expected output should be exactly as presented in the paper (it takes less than 1 minute to run the code)

--- Evaluation results ---
Avg@5-CPU:   0.97
Avg@5-MEM:   1.0
Avg@5-DISK:  0.91
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.67
---
Avg speed: 0.07

As presented in Table 5, BARO [ $t_\Delta = 60$ ] achieves Avg@5 of 0.94, 0.99, 0.87, 0.99, and 0.6 for CPU, MEM, DISK, DELAY, and LOSS fault types on the Online Boutique dataset. To reproduce these results, you can run the following commands:

python rq2.py --dataset online-boutique --method baro --tdelta 60

The expected output should be exactly as presented in the paper (it takes less than 1 minute to run the code)

--- Evaluation results ---
Avg@5-CPU:   0.94
Avg@5-MEM:   0.99
Avg@5-DISK:  0.87
Avg@5-DELAY: 0.99
Avg@5-LOSS:  0.6
---
Avg speed: 0.07

We can replace the baro method with other methods (e.g., nsigma, fci_randomwalk) and substitute online-boutique with other datasets to replicate the corresponding results shown in Table 5. This reproduction process is also integrated into our Continuous Integration (CI) setup. For more details, refer to the .github/workflows/reproduce-rq2.yml file.

Reproduce RQ3 - Efficiency

The running time of each method is recorded in the scripts of RQ1 and RQ2 as we described and presented above.

Reproduce RQ4 - Data lengths

Our RQ4 relies on the scripts of RQ1 and RQ2 as we described and presented above, with the option --length.

As presented in Figure 3, BARO maintains stable accuracy on the Online Boutique dataset when we vary the data length from 60 to 600. To reproduce these results, for example, you can run the following Bash script:

# You can put the code here to a file named tmp.sh
for length in 60 120 180 240 300 360 420 480 540 600; do
    python rq2.py --dataset online-boutique --method baro --length $length
done
Expected output after running the above code (it takes few minutes)

The output list presents the Avg@5 scores when we vary the data length. You can see that BARO can maintain a stable performance.

100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.64it/s]
--- Evaluation results ---
Avg@5-CPU:   0.84
Avg@5-MEM:   0.98
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 120 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.37it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 180 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.46it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 240 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.47it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 300 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.40it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 360 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.42it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 420 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.53it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 480 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.37it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 540 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.50it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07
=== VARY LENGTH: 600 ===
100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 125/125 [00:08<00:00, 14.49it/s]
--- Evaluation results ---
Avg@5-CPU:   0.82
Avg@5-MEM:   0.99
Avg@5-DISK:  0.94
Avg@5-DELAY: 0.98
Avg@5-LOSS:  0.66
---
Avg speed: 0.07

Download Datasets

Our datasets and their description are publicly available in Zenodo repository with the following information:

We also provide utility functions to download our datasets using Python. The downloaded datasets will be available at directory data.

from RCAEval.utility import (
    download_syn_rcd_dataset,
    download_syn_circa_dataset,
    download_syn_causil_dataset,
    download_rca_circa_dataset,
    download_rca_rcd_dataset,
    download_online_boutique_dataset,
    download_sock_shop_1_dataset,
    download_sock_shop_2_dataset,
    download_train_ticket_dataset,
)

download_syn_rcd_dataset()
download_syn_circa_dataset()
download_syn_causil_dataset()
download_rca_circa_dataset()
download_rca_rcd_dataset()
download_online_boutique_dataset()
download_sock_shop_1_dataset()
download_sock_shop_2_dataset()
download_train_ticket_dataset()
Expected output after running the above code (it takes few minutes to download our datasets) 
$ python test.py
Downloading syn_rcd.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 11.2M/11.2M [00:03<00:00, 3.56MiB/s]
Downloading syn_circa.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 52.5M/52.5M [00:06<00:00, 7.51MiB/s]
Downloading syn_causil.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 73.8M/73.8M [00:09<00:00, 8.05MiB/s]
Downloading rca_circa.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 52.7M/52.7M [00:06<00:00, 7.95MiB/s]
Downloading rca_rcd.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 22.7M/22.7M [00:04<00:00, 5.16MiB/s]
Downloading online-boutique.zip..: 100%|โ–ˆโ–ˆ| 31.0M/31.0M [00:04<00:00, 6.49MiB/s]
Downloading sock-shop-1.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 3.54M/3.54M [00:02<00:00, 1.68MiB/s]
Downloading sock-shop-2.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 79.1M/79.1M [00:09<00:00, 8.38MiB/s]
Downloading train-ticket.zip..: 100%|โ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆโ–ˆ| 280M/280M [00:27<00:00, 10.1MiB/s]

Download Paper and Supplementary Material

Licensing

This repository includes code from various sources with different licenses. We have included their corresponding LICENSE into the LICENSES directory:

For the code implemented by us and for our datasets, we distribute them under the MIT LICENSE.

Acknowledgments

We would like to express our sincere gratitude to the researchers and developers who created the baselines used in our study. Their work has been instrumental in making this project possible. We deeply appreciate the time, effort, and expertise that have gone into developing and maintaining these resources. This project would not have been feasible without their contributions.

Contact

luan.pham@rmit.edu.au

Project details

Verified details

These details have been verified by PyPI
Maintainers
Avatar for phamquiluan from gravatar.com phamquiluan

Unverified details

These details have not been verified by PyPI

Release history Release notifications | RSS feed

0.1.6

0.1.5

0.1.4

0.1.3

This version

0.1.2

0.1.1

0.1.0

0.0.13

0.0.12

0.0.11

0.0.10

0.0.9

0.0.8

0.0.7

0.0.4

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distributions

No source distribution files available for this release.See tutorial on generating distribution archives.

Built Distribution

RCAEval-0.1.2-py3-none-any.whl (10.0 kB view details)

Uploaded Python 3

File details

Details for the file RCAEval-0.1.2-py3-none-any.whl.

File metadata

  • Download URL: RCAEval-0.1.2-py3-none-any.whl
  • Upload date:
  • Size: 10.0 kB
  • Tags: Python 3
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/5.1.1 CPython/3.9.19

File hashes

Hashes for RCAEval-0.1.2-py3-none-any.whl
Algorithm Hash digest
SHA256 9e8df2204b5639545652340edd7482f6e3f00d4256b0d6fa2005053cfa69d08c
MD5 38806a1970ac54e4023fce0f5d630bb6
BLAKE2b-256 bee38e0b3f5ecf8af1654e5f76a4951b6fc96fd6a784f61e71bc30698829b71a

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page