SuricataLog 0.1.5

Scripts to display contents of Suricata eve.json log

SuricataLog

When I started learning how to use Suricata quickly found that I needed a tool to inspect the eve.json file; Most of the tutorials and documentation out there suggested installing a stack to do the following tasks:

1. Store the logs in a central location
2. Normalize and enrich the events, specially alerts
3. Use a frontend to dive into the data

Which is very useful, but what if I just needed to do a quick inspection of the events?

Sooner or later you will get bored to death doing this:

cat eve.json | jq -r -c 'select(.event_type=="alert")|.payload'| base64 --decode

SuricataLog is a set of tools/ scripts to parse and display Suricata log files (like /var/log/suricata/eve.json)

The Eve JSON format is not very complex, so I wrote few scripts with the features I tough would be more useful for my home network analysis.

As a bonus, I wrote my learning experience as a tutorial that you can use to learn about Suricata and also how to test it.

Installing from PIP

Before you do anything else, make sure your environment is good to go:

python3 -m venv ~/virtualenv/suricatalog
. ~/virtualenv/suricatalog/bin/activate
python3 -m pip install --upgrade pip setuptools wheel

Installing from Pypi.org

pip3 install --upgrade SuricataLog

Installing from source

git clone [e-mail]:josevnz/SuricataLog.git
cd SuricataLog
python3 -m venv ~/virtualenv/suricatalog
. ~/virtualenv/suricatalog/bin/activate
python3 -m pip install --upgrade build
python3 -m build
pip3 install dist/SuricataLog-X.Y.Z-py3-none-any.whl

Developer installation

So you want to contribute? Or found a bug and think you can submit a patch? Nice! Here is what you can dd to run on development mode:

git clone [e-mail]:josevnz/SuricataLog.git
cd SuricataLog
python3 -m venv ~/virtualenv/suricatalog
. ~/virtualenv/suricatalog/bin/activate
pip install --upgrade pip
python -m pip install --upgrade build
pip install textual-dev
pip install --editable .

Running unit tests is very easy after that:

(SuricataLog) [josevnz@dmaf5 SuricataLog]$ python -m unittest test/test_suricatalog.py
.........
----------------------------------------------------------------------
Ran 9 tests in 0.334s

OK

If the unit tests fails, then this is most likely the first place to fix a problem.

I do recommend also running the textualize console and watch for the console messages:

textual console

Then on another terminal:

textual run --dev --command eve_log --timestamp '2015-01-01 10:41:21.642899' --formats TABLE test/eve.json

Running the scripts

Once everything is installed you should be able to call the scripts

Simple EVE log parser

Better see it by yourself (remember, use --help to learn what options are supported)

Table format:

eve_log --timestamp '2015-01-01 10:41:21.642899' --formats TABLE test/eve.json

Canned reports with eve_json.py

(suricatalog) [josevnz@dmaf5 SuricataLog]$ eve_json --help
usage: eve_json [-h] [--nxdomain | --payload | --flow | --netflow NETFLOW | --useragent] eve [eve ...]

This script is inspired by the examples provided on [15.1.3. Eve JSON ‘jq’ Examples](https://suricata.readthedocs.io/en/suricata-6.0.0/output/eve/eve-json-
examplesjq.html) A few things: * The output uses colorized JSON

positional arguments:
  eve                Path to one or more /var/log/suricata/eve.json file to parse.

optional arguments:
  -h, --help         show this help message and exit
  --nxdomain         Show DNS records with NXDOMAIN
  --payload          Show alerts with a printable payload
  --flow             Aggregated flow report per protocol and destination port
  --netflow NETFLOW  Get the netflow for a given IP address
  --useragent        Top user agent in HTTP traffic

Take a look at some examples below:

NXDOMAIN

eve_json --nxdomain test/eve.json

PAYLOAD

eve_json --payload ~/Downloads/eve.json

FLOW

eve_json --flow test/eve_udp_flow.json

NETFLOW

eve_json --netflow 224.0.0.251 test/eve_udp_flow.json

USERAGENT

eve_json --useragent test/eve.json

Supported versions

I work on this project on my spare time and I cannot support every version of Linux/ Python combination out there. This is my current test bed, and it may change without further notice

SuricataLog	Supported	OS	Python	Suricata
<= 0.8	NO	NA	< 3.8	6.04
0.9+	YES	fedora 37	=> 3.11.4	6.04
0.9+	YES	Armbian 23.02.2 Jammy	=> 3.10.6	6.04
0.9+	YES	Ubuntu 20.04.4 LTS (Focal Fossa)	=> 3.8.10	6.04

You are more than welcome to:

• Submit patches with new features and bug-fixes.
• Open bug reports. Be as detailed as possible, otherwise I will have no choice but to close it.