adafruit-circuitpython-adt7410 2.0.0

CircuitPython driver for reading temperature from the Analog Devices ADT7410 precision temperature sensor.

Introduction

CircuitPython driver for reading temperature from the Analog Devices ADT7410 precision temperature sensor

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

• Register

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-adt7410

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-adt7410

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-adt7410

Usage Example

import time
import board
import adafruit_adt7410

i2c = board.I2C()  # uses board.SCL and board.SDA
adt = adafruit_adt7410.ADT7410(i2c, address=0x48)
adt.high_resolution = True

while True:
    print(adt.temperature)
    time.sleep(0.5)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.