CircuitPython library for AMG88xx thermal camera.
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Of course, you must import the library to use it:
import busio import adafruit_amg88xx
The way to create an I2C object depends on the board you are using. For boards with labeled SCL and SDA pins, you can:
You can also use pins defined by the onboard microcontroller through the microcontroller.pin module.
Now, to initialize the I2C bus:
i2c_bus = busio.I2C(board.SCL, board.SDA)
Once you have created the I2C interface object, you can use it to instantiate the AMG88xx object
amg = adafruit_amg88xx.AMG88XX(i2c_bus)
You can also optionally use the alternate i2c address (make sure to solder the jumper on the back of the board if you want to do this)
amg = adafruit_amg88xx.AMG88XX(i2c_bus, addr=0x68)
Pixels can be then be read by doing:
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
To build this library locally you’ll need to install the circuitpython-travis-build-tools package.
Once installed, make sure you are in the virtual environment:
Then run the build:
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
|Filename, size||File type||Python version||Upload date||Hashes|
|Filename, size adafruit-circuitpython-amg88xx-1.1.0.tar.gz (21.9 kB)||File type Source||Python version None||Upload date||Hashes View hashes|
Hashes for adafruit-circuitpython-amg88xx-1.1.0.tar.gz