adafruit-circuitpython-charlcd 3.3.7

CircuitPython library for standard character LCDs.

Introduction

This library is compatible with standard Character LCDs such as: * Adafruit Standard LCD 16x2 * Adafruit RGB backlight negative LCD 16x2 * Adafruit RGB backlight negative LCD 20x4

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-charlcd

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-charlcd

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-charlcd

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Adafruit CircuitPython BusDevice

• Adafruit CircuitPython MCP230xx

• Adafruit CircuitPython 74HC595

I2C & SPI displays also depend on:

• Bus Device

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Usage Example

The Character_LCD class interfaces a predefined Character LCD display with CircuitPython.

import board
import digitalio
import adafruit_character_lcd.character_lcd as character_lcd

You must define the data pins (RS, EN, D4, D5, D6, D7) in your code before using the Character_LCD class. If you want to have on/off backlight functionality, you can also define your backlight as lcd_backlight. Otherwise, the backlight will always remain on. The following is an example setup.

lcd_rs = digitalio.DigitalInOut(board.D7)
lcd_en = digitalio.DigitalInOut(board.D8)
lcd_d7 = digitalio.DigitalInOut(board.D12)
lcd_d6 = digitalio.DigitalInOut(board.D11)
lcd_d5 = digitalio.DigitalInOut(board.D10)
lcd_d4 = digitalio.DigitalInOut(board.D9)
lcd_backlight = digitalio.DigitalInOut(board.D13)

You must also define the size of the CharLCD by specifying its lcd_columns and lcd_rows:

lcd_columns = 16
lcd_rows = 2

After you have set up your LCD, we can make the device by calling it

lcd = character_lcd.Character_LCD_Mono(lcd_rs, lcd_en, lcd_d4, lcd_d5, lcd_d6, lcd_d7, lcd_columns, lcd_rows, lcd_backlight)

To verify that your pins are correct, print a hello message to the CharLCD:

lcd.message = "Hello\nCircuitPython"

Custom character example with create_char() is provided within /examples/

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.