adafruit-circuitpython-ds2413 1.2.13

CircuitPython library for DS2413 1-Wire Dual Channel Addressable Switch.

Introduction

CircuitPython driver for the DS2413 one wire 2 channel GPIO breakout.

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Adafruit OneWire

Note: This library depends on the OneWire library and will not work on the Raspberry Pi

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-ds2413

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-ds2413

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-ds2413

Usage Example

import time
import board
from adafruit_onewire.bus import OneWireBus
import adafruit_ds2413

ow_bus = OneWireBus(board.D2)
ds = adafruit_ds2413.DS2413(ow_bus, ow_bus.scan()[0])

led = ds.IOA
button = ds.IOB
button.direction = adafruit_ds2413.INPUT

while not button.value:
    led.value = True
    time.sleep(0.5)
    led.value = False
    time.sleep(0.5)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.