adafruit-circuitpython-irremote 5.0.1

CircuitPython library for infrared transmit and receive.

Introduction

CircuitPython driver for use with IR Receivers.

Examples of products to use this library with:

• Circuit Playground Express

• IR Receiver Sensor

Dependencies

This driver depends on:

• Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-irremote

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-irremote

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-irremote

Usage Example

# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote

pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()


while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:     # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.