adafruit-circuitpython-ntp 2.2.6

Network Time Protocol (NTP) helper for CircuitPython

Introduction

Network Time Protocol (NTP) helper for CircuitPython.

Dependencies

This driver depends on:

• Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-ntp

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-ntp

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-ntp

Usage Example

import time
import board
import busio
from digitalio import DigitalInOut
from adafruit_esp32spi import adafruit_esp32spi
from adafruit_ntp import NTP

# If you are using a board with pre-defined ESP32 Pins:
esp32_cs = DigitalInOut(board.ESP_CS)
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)

# If you have an externally connected ESP32:
# esp32_cs = DigitalInOut(board.D9)
# esp32_ready = DigitalInOut(board.D10)
# esp32_reset = DigitalInOut(board.D5)

spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)

print("Connecting to AP...")
while not esp.is_connected:
    try:
        esp.connect_AP(b"WIFI_SSID", b"WIFI_PASS")
    except RuntimeError as e:
        print("could not connect to AP, retrying: ", e)
        continue

# Initialize the NTP object
ntp = NTP(esp)

# Fetch and set the microcontroller's current UTC time
ntp.set_time()

# Get the current time in seconds since Jan 1, 1970
current_time = time.time()
print("Seconds since Jan 1, 1970: {} seconds".format(current_time))

Documentation

API documentation for this library can be found on Read the Docs.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.