adafruit-circuitpython-scd30 1.0.1

Helper library for the SCD30 e-CO2 sensor

Introduction

Helper library for the SCD30 e-CO2 sensor

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

• Register

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-scd30

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-scd30

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-scd30

Usage Example

import time
import board
import busio
import adafruit_scd30

i2c = busio.I2C(board.SCL, board.SDA)
scd = adafruit_scd30.SCD30(i2c)

while True:
    # since the measurement interval is long (2+ seconds) we check for new data before reading
    # the values, to ensure current readings.
    if scd.data_available:
        print("Data Available!")
        print("eCO2:", scd.eCO2, "PPM")
        print("Temperature:", scd.temperature, "degrees C")
        print("Humidity:", scd.relative_humidity, "%%rH")
        print("")
        print("Waiting for new data...")
        print("")

    time.sleep(0.5)

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.