adafruit-circuitpython-ssd1325 1.3.0

DisplayIO driver for grayscale OLEDs drive by SSD1325

Introduction

DisplayIO driver for grayscale OLEDs drive by SSD1325

Dependencies

This driver depends on:

• Adafruit CircuitPython (version 5+)

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

Note

This library is not available on PyPI yet. Install documentation is included as a standard element. Stay tuned for PyPI availability!

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-ssd1325

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-ssd1325

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-ssd1325

Usage Example

import time
import board
import busio
import displayio
import adafruit_ssd1325

displayio.release_displays()

# This pinout works on a Metro and may need to be altered for other boards.
spi = busio.SPI(board.SCL, board.SDA)
tft_cs = board.D9
tft_dc = board.D8
tft_reset = board.D7

display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs, reset=tft_reset,
                                 baudrate=1000000)
time.sleep(1)
display = adafruit_ssd1325.SSD1325(display_bus, width=128, height=64)

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.