aioswitcher 4.0.3

Switcher Python Integration.

Switcher Python Integration

PyPi module integrating with various Switcher devices.
Check out the wiki pages for a list of supported devices.

pip install aioswitcher

Documentation

Wiki

Contributing

Example Usage

State Bridge

async def print_devices(delay):
    def on_device_found_callback(device):
        # a switcher device will broadcast a state message approximately every 4 seconds
        print(asdict(device))

    async with SwitcherBridge(on_device_found_callback):
        await asyncio.sleep(delay)

# run the bridge for 60 seconds
asyncio.run(print_devices(60))

Power Plug API

async def control_power_plug(device_type, device_ip, device_id, device_key) :
    # for connecting to a device we need its type, id, login key and ip address
    async with SwitcherType1Api(device_type, device_ip, device_id, device_key) as api:
        # get the device current state
        await api.get_state()
        # turn the device on
        await api.control_device(Command.ON)
        # turn the device off
        await api.control_device(Command.OFF)
        # set the device name to 'my new name'
        await api.set_device_name("my new name")

asyncio.run(control_power_plug(DeviceType.POWER_PLUG, "111.222.11.22", "ab1c2d", "00"))

Water Heater API

async def control_water_heater(device_type, device_ip, device_id, device_key) :
    # for connecting to a device we need its type, id, login key and ip address
    async with SwitcherType1Api(device_type, device_ip, device_id, device_key) as api:
        # get the device current state
        await api.get_state()
        # turn the device on for 15 minutes
        await api.control_device(Command.ON, 15)
        # turn the device off
        await api.control_device(Command.OFF)
        # set the device name to 'my new name'
        await api.set_device_name("my new name")
        # configure the device for 02:30 auto shutdown
        await api.set_auto_shutdown(timedelta(hours=2, minutes=30))
        # get the schedules from the device
        await api.get_schedules()
        # delete and existing schedule with id 1
        await api.delete_schedule("1")
        # create a new recurring schedule for 13:00-14:30
        # executing on sunday and friday
        await api.create_schedule("13:00", "14:30", {Days.SUNDAY, Days.FRIDAY})

asyncio.run(control_water_heater(DeviceType.MINI, "111.222.11.22", "ab1c2d" , "00"))
asyncio.run(control_water_heater(DeviceType.TOUCH, "111.222.11.22", "ab1c2d" , "00"))
asyncio.run(control_water_heater(DeviceType.V2_ESP, "111.222.11.22", "ab1c2d" , "00"))
asyncio.run(control_water_heater(DeviceType.V2_QCA, "111.222.11.22", "ab1c2d" , "00"))
asyncio.run(control_water_heater(DeviceType.V4, "111.222.11.22", "ab1c2d" , "00"))

Runner API

async def control_runner(device_type, device_ip, device_id, device_key, token) :
    # for connecting to a device we need its type, id, login key and ip address
    async with SwitcherType2Api(device_type, device_ip, device_id, device_key, token) as api:
        # get the device current state
        await api.get_shutter_state()
        # open the shutter to 30%, circuit number is 0
        await api.set_position(30, 0)
        # stop the shutter if currently rolling, circuit number is 0
        await api.stop_shutter(0)
        # turn on the light, circuit number is 0 (Only for Runner S11 and Runner S12)
        await api.api.set_light(DeviceState.ON, 0)
        # turn off the light, circuit number is 0 (Only for Runner S11 and Runner S12)
        await api.api.set_light(DeviceState.OFF, 0)

asyncio.run(control_runner(DeviceType.RUNNER, "111.222.11.22", "ab1c2d", "00"))
asyncio.run(control_runner(DeviceType.RUNNER_MINI, "111.222.11.22", "ab1c2d", "00"))
asyncio.run(control_runner(DeviceType.RUNNER_S11, "111.222.11.22", "ab1c2d", "00", "zvVvd7JxtN7CgvkD1Psujw=="))

Breeze API

async def control_breeze(device_type, device_ip, device_id, device_key, remote_manager, remote_id) :
    # for connecting to a device we need its type, id, login key and ip address
    async with SwitcherType2Api(device_type, device_ip, device_id, device_key) as api:
        # get the device current state
        await api.get_breeze_state()
        # initialize the Breeze RemoteManager and get the remote
        remote = remote_manager.get_remote(remote_id)
        # prepare a control command that turns on the Breeze
        # set to 24 degree (Celsius) cooling with vertical swing
        # send command to the device
        await api.control_breeze_device(
            remote,
            DeviceState.ON,
            ThermostatMode.COOL,
            24,
            ThermostatFanLevel.MEDIUM,
            ThermostatSwing.ON,
        )

# create the remote manager outside the context for re-using
remote_manager = SwitcherBreezeRemoteManager()
asyncio.run(control_breeze(DeviceType.BREEZE, "111.222.11.22", "ab1c2d", "00", remote_manager, "DLK65863"))

Command Line Helper Scripts

• discover_devices.py can discover devices and their states (can be run by poetry run discover_devices).
• control_device.py can control a device (can be run by poetry run control_device).
• get_device_login_key.py can get a device login key (can be run by poetry run get_device_login_key).
• validate_token.py can validate a device token which is a must for newer devices, used for communicating with devices (can be run by poetry run validate_token).

Disclaimer

This is NOT an official module and it is NOT officially supported by the vendor.
That said, thanks are in order to all the people at Switcher for their cooperation and general support.

Contributors

Thanks goes to these wonderful people (emoji key):

Aviad Golan 🔣	Dolev Ben Aharon 📖	Fabian Affolter 💻	Itzik Ephraim 💻	Kesav890 📖	Liad Avraham 💻	Marc Mueller 💻
Or Bin 💻	Roeeeee 💻	Shai rod 🔣	Shay Levy 💻 🤔 🚧	YogevBokobza 💻 ⚠️ 🚧	Yuval Moran 💻 ⚠️	ayal 🐛 💻
dmatik 📝 🤔 📓	epenet 🐛 💻	jafar-atili 💻 📖