Skip to main content

Command-line tool and library to interact with an aria2c daemon process with JSON-RPC.

Project description

aria2p

pipeline status coverage report documentation pypi version Gitter support

Command-line tool and Python library to interact with an aria2c daemon process through JSON-RPC.

demo

To avoid confusion:

  • aria2 is a lightweight multi-protocol & multi-source, cross platform download utility operated in command-line. It supports HTTP/HTTPS, FTP, SFTP, BitTorrent and Metalink.
  • aria2c is the name of the command-line executable provided by aria2. It can act as a daemon.
  • aria2p (p for Python) is a command-line client that can interact with an aria2c daemon. It is not an official client. There are other Python packages allowing you to interact with an aria2c daemon. These other packages do not offer enough usability (in my opinion), this is why I'm developing aria2p.

Purpose: aria2c can run in the foreground, for one-time downloads, or in the background, as a daemon. This is where aria2p intervenes: when an instance of aria2c is running in the background, aria2p will be able to communicate with it to add downloads to the queue, remove, pause or resume them, etc.

In order for aria2p to be able to communicate with the aria2c process, RPC mode must be enabled with the --enable-rpc option of aria2c. RPC stands for Remote Procedure Call. Although aria2c supports both JSON-RPC and XML-RPC protocols, aria2p works with JSON only (not XML). More information about how to configure aria2c to run as a daemon with RPC mode enabled can be found in the Configuration section of the documentation.

Table of contents

Requirements

aria2p requires Python 3.6 or above.

To install Python 3.6, I recommend using pyenv.
# install pyenv
git clone https://github.com/pyenv/pyenv ~/.pyenv

# setup pyenv (you should also put these three lines in .bashrc or similar)
export PATH="${HOME}/.pyenv/bin:${PATH}"
export PYENV_ROOT="${HOME}/.pyenv"
eval "$(pyenv init -)"

# install Python 3.6
pyenv install 3.6.8

# make it available globally
pyenv global system 3.6.8

You must also install aria2. On systems with apt-get:

sudo apt-get install aria2

Installation

With pip:

python3.6 -m pip install aria2p[tui]

With pipx:

python3.6 -m pip install --user pipx

pipx install --python python3.6 aria2p[tui]

The tui extra is needed for the interactive interface. If you don't need the interface (for example when you are writing a Python package with a dependency to aria2p), simply install aria2p without any extra.

Usage (as a library)

This library is still a work in progress. More examples will be added later. In the meantime, you can read the Reference section on the official documentation.

import aria2p

# initialization, these are the default values
aria2 = aria2p.API(
    aria2p.Client(
        host="http://localhost",
        port=6800,
        secret=""
    )
)

# list downloads
downloads = aria2.get_downloads()

for download in downloads:
    print(download.name, download.download_speed)

# add downloads
magnet_uri = "magnet:?xt=urn:..."

download = aria2.add_magnet(magnet_uri)

Usage (command-line)

usage: aria2p [GLOBAL_OPTS...] COMMAND [COMMAND_OPTS...]

Command-line tool and Python library to interact with an `aria2c` daemon
process through JSON-RPC.

Global options:
  -h, --help            Show this help message and exit. Commands also accept
                        the -h/--help option.
  -p PORT, --port PORT  Port to use to connect to the remote server.
  -H HOST, --host HOST  Host address for the remote server.
  -s SECRET, --secret SECRET
                        Secret token to use to connect to the remote server.
  -L {TRACE,DEBUG,INFO,SUCCESS,WARNING,ERROR,CRITICAL}, --log-level {TRACE,DEBUG,INFO,SUCCESS,WARNING,ERROR,CRITICAL}
                        Log level to use
  -P LOG_PATH, --log-path LOG_PATH
                        Log path to use. Can be a directory or a file.

Commands:
  
    add                 Add downloads with URIs/Magnets/torrents/Metalinks.
    add-magnets (add-magnet)
                        Add downloads with Magnet URIs.
    add-metalinks (add-metalink)
                        Add downloads with Metalink files.
    add-torrents (add-torrent)
                        Add downloads with torrent files.
    autopurge (autoclear)
                        Automatically purge completed/removed/failed
                        downloads.
    call                Call a remote method through the JSON-RPC client.
    pause (stop)        Pause downloads.
    remove (rm, del, delete)
                        Remove downloads.
    resume (start)      Resume downloads.
    show                Show the download progression.
    top                 Launch the top-like interactive interface.
    listen              Listen to notifications.

Calling aria2p without any arguments will by default call the top command, which is a console interactive interface.

Commands:


add

usage: aria2p add [-h] [-f FROM_FILE] [uris [uris ...]]

Add downloads with URIs/Magnets/torrents/Metalinks.

positional arguments:
  uris                  The URIs/file-paths to add.

optional arguments:
  -h, --help            Show this help message and exit.
  -f FROM_FILE, --from-file FROM_FILE
                        Load URIs from a file.


add-magnets

usage: aria2p add-magnets [-h] [-f FROM_FILE] [uris [uris ...]]

Add downloads with Magnet URIs.

positional arguments:
  uris                  The magnet URIs to add.

optional arguments:
  -h, --help            Show this help message and exit.
  -f FROM_FILE, --from-file FROM_FILE
                        Load URIs from a file.


add-metalinks

usage: aria2p add-metalinks [-h] [-f FROM_FILE]
                            [metalink_files [metalink_files ...]]

Add downloads with Metalink files.

positional arguments:
  metalink_files        The paths to the metalink files.

optional arguments:
  -h, --help            Show this help message and exit.
  -f FROM_FILE, --from-file FROM_FILE
                        Load file paths from a file.


add-torrents

usage: aria2p add-torrents [-h] [-f FROM_FILE]
                           [torrent_files [torrent_files ...]]

Add downloads with torrent files.

positional arguments:
  torrent_files         The paths to the torrent files.

optional arguments:
  -h, --help            Show this help message and exit.
  -f FROM_FILE, --from-file FROM_FILE
                        Load file paths from a file.


autopurge

usage: aria2p autopurge [-h]

Automatically purge completed/removed/failed downloads.

optional arguments:
  -h, --help  Show this help message and exit.


call

usage: aria2p call [-h] [-P PARAMS [PARAMS ...] | -J PARAMS] method

Call a remote method through the JSON-RPC client.

positional arguments:
  method                The method to call (case insensitive). Dashes and
                        underscores will be removed so you can use as many as
                        you want, or none. Prefixes like 'aria2.' or 'system.'
                        are also optional.

optional arguments:
  -h, --help            Show this help message and exit.
  -P PARAMS [PARAMS ...], --params-list PARAMS [PARAMS ...]
                        Parameters as a list of strings.
  -J PARAMS, --json-params PARAMS
                        Parameters as a JSON string. You should always wrap it
                        at least once in an array '[]'.

As explained in the help text, the method can be the exact method name, or just the name without the prefix. It is case-insensitive, and dashes and underscores will be removed.

The following are all equivalent:

  • aria2.addUri
  • aria2.adduri
  • addUri
  • ADDURI
  • aria2.ADD-URI
  • add_uri
  • A-d_D-u_R-i (yes it's valid)
  • A---R---I---A---2.a__d__d__u__r__i (I think you got it)
  • and even more ugly forms...

Examples

List all available methods. This example uses jq.

$ aria2p call listmethods | jq
[
  "aria2.addUri",
  "aria2.addTorrent",
  "aria2.getPeers",
  "aria2.addMetalink",
  "aria2.remove",
  "aria2.pause",
  "aria2.forcePause",
  "aria2.pauseAll",
  "aria2.forcePauseAll",
  "aria2.unpause",
  "aria2.unpauseAll",
  "aria2.forceRemove",
  "aria2.changePosition",
  "aria2.tellStatus",
  "aria2.getUris",
  "aria2.getFiles",
  "aria2.getServers",
  "aria2.tellActive",
  "aria2.tellWaiting",
  "aria2.tellStopped",
  "aria2.getOption",
  "aria2.changeUri",
  "aria2.changeOption",
  "aria2.getGlobalOption",
  "aria2.changeGlobalOption",
  "aria2.purgeDownloadResult",
  "aria2.removeDownloadResult",
  "aria2.getVersion",
  "aria2.getSessionInfo",
  "aria2.shutdown",
  "aria2.forceShutdown",
  "aria2.getGlobalStat",
  "aria2.saveSession",
  "system.multicall",
  "system.listMethods",
  "system.listNotifications"
]

List the GIDs (identifiers) of all active downloads. Note that we must give the parameters as a JSON string.

$ aria2p call tellactive -J '[["gid"]]'
[{"gid": "b686cad55029d4df"}, {"gid": "4b39a1ad8fd94e26"}, {"gid": "9d331cc4b287e5df"}, {"gid": "8c9de0df753a5195"}]

Pause a download using its GID. Note that when a single string argument is required, it can be passed directly with -P.

$ aria2p call pause -P b686cad55029d4df
"b686cad55029d4df"

Add a download using magnet URIs. This example uses jq -r to remove the quotation marks around the result.

$ aria2p call adduri -J '[["magnet:?xt=urn:..."]]' | jq -r
4b39a1ad8fd94e26f

Purge download results (remove completed downloads from the list).

$ aria2p call purge_download_result
"OK"

listen

usage: aria2p listen [-h] [-c CALLBACKS_MODULE] [-t TIMEOUT]
                     [event_types [event_types ...]]

Listen to notifications.

positional arguments:
  event_types           The types of notifications to process: start, pause,
                        stop, error, complete or btcomplete. Example: aria2p
                        listen error btcomplete. Useful if you want to spawn
                        multiple specialized aria2p listener, for example one
                        for each type of notification, but still want to use
                        only one callback file.

optional arguments:
  -h, --help            Show this help message and exit.
  -c CALLBACKS_MODULE, --callbacks-module CALLBACKS_MODULE
                        Path to the Python module defining your notifications
                        callbacks.
  -t TIMEOUT, --timeout TIMEOUT
                        Timeout in seconds to use when waiting for data over
                        the WebSocket at each iteration. Use small values for
                        faster reactivity when stopping to listen.


pause

usage: aria2p pause [-h] [-a] [-f] [gids [gids ...]]

Pause downloads.

positional arguments:
  gids         The GIDs of the downloads to pause.

optional arguments:
  -h, --help   Show this help message and exit.
  -a, --all    Pause all the downloads.
  -f, --force  Pause without contacting servers first.


remove

usage: aria2p remove [-h] [-a] [-f] [gids [gids ...]]

Remove downloads.

positional arguments:
  gids         The GIDs of the downloads to remove.

optional arguments:
  -h, --help   Show this help message and exit.
  -a, --all    Remove all the downloads.
  -f, --force  Remove without contacting servers first.


resume

usage: aria2p resume [-h] [-a] [gids [gids ...]]

Resume downloads.

positional arguments:
  gids        The GIDs of the downloads to resume.

optional arguments:
  -h, --help  Show this help message and exit.
  -a, --all   Resume all the downloads.


show

usage: aria2p show [-h]

Show the download progression.

optional arguments:
  -h, --help  Show this help message and exit.


top

usage: aria2p top [-h]

Launch the top-like interactive interface.

optional arguments:
  -h, --help  Show this help message and exit.

Troubleshoot

  • Error outputs like below when using aria2p as a Python library:

    requests.exceptions.ConnectionError: HTTPConnectionPool(host='localhost', port=6800): Max retries exceeded with url: /jsonrpc (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x1115b1908>: Failed to establish a new connection: [Errno 61] Connection refused',))
    

    Solution: aria2c needs to be up and running first.

Support

To support this project, consider donating through one of the following platforms:

To support me as an open-source software author, consider donating or be a supporter through one of the following platforms

Thank you!

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

aria2p-0.8.1.tar.gz (75.2 kB view hashes)

Uploaded Source

Built Distribution

aria2p-0.8.1-py3-none-any.whl (78.5 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page