ble2mqtt 0.1.0a19

BLE to MQTT bridge

Service to export BLE devices to MQTT with Home Assistant discovery

!!! It is a very early alpha release !!!

Use this software at your own risk.

Default config should be located in /etc/ble2mqtt.json or can be overridden with BLE2MQTT_CONFIG environment variable.

Example run command:

BLE2MQTT_CONFIG=./ble2mqtt.json ble2mqtt

The configuration file is a JSON with the following content:

{
    "mqtt_host": "localhost",
    "mqtt_port": 1883,
    "mqtt_user": "",
    "mqtt_password": "",
    "devices": [
        {
            "address": "11:22:33:aa:cc:aa",
            "type": "presence"
        },
        {
            "address": "11:22:33:aa:bb:cc",
            "type": "redmond200"
        },
        {
            "address": "11:22:33:aa:bb:dd",
            "type": "xiaomihtv1"
        },
        {
            "address": "11:22:34:aa:bb:dd",
            "type": "xiaomihtv1",
            "passive": false
        },
        {
            "address": "11:22:33:aa:bb:ee",
            "type": "xiaomilywsd"
        },
        {
            "address": "11:22:33:aa:bb:ff",
            "type": "xiaomilywsd_atc"
        }
    ]
}

Supported devices:

Any device

• Any bluetooth device can work as a presence tracker

Kettles:

• Redmond G2xx series (redmond200)

Humidity sensors:

• Xiaomi MJ_HT_V1 (xiaomihtv1)
• Xiaomi LYWSD03MMC (xiaomilywsd)
• Xiaomi LYWSD03MMC with custom ATC firmware (xiaomilywsd_atc)

By default, a device works in the passive mode without connection by listening to advertisement packets from a device. To use connection to the device provide "passive": false parameter.

Supported devices in passive mode:

• Xiaomi MJ_HT_V1 (xiaomihtv1)
• Xiaomi LYWSD03MMC with custom ATC firmware (xiaomilywsd_atc)

OpenWRT installation

Execute the following commands in the terminal:

opkg update
opkg install python3-pip python3-asyncio
pip3 install git+https://github.com/hbldh/bleak.git@f50a334e1173b27a8cf0a53d8ac56d9acc24fedf#egg=bleak
pip3 install -U ble2mqtt

Create the configuration file in /etc/ble2mqtt.json and append your devices.

Bluetooth must be turned on.

hciconfig hci0 up

Run the service in background

ble2mqtt 2> /tmp/ble2mqtt.log &

Container

Build the image as:

podman build -t ble2mqtt:dev .

Start the container and share the config file and DBus for Bluetooth connectivity:

podman run \
-d \
--net=host \
-v $PWD/ble2mqtt.json.sample:/etc/ble2mqtt.json:z \
-v /var/run/dbus:/var/run/dbus:z \
ble2mqtt:dev

Instead of sharing /var/run/dbus, you can export DBUS_SYSTEM_BUS_ADDRESS.

NOTE: --net=host is required as it needs to use the bluetooth interface