Blosc2 Btune

Btune is a dynamic plugin for Blosc2 that assists in finding the optimal combination of compression parameters. It works by training a neural network on your most representative datasets.

By default, this software uses a genetic algorithm to test different combinations of compression parameters that meet your requirements for both compression ratio and speed for every chunk in the dataset. It assigns a score to each combination and, after a number of iterations, the software stops and uses the best score (minimal value) found for the rest of the dataset. For more info and a graphical visualization, visit https://btune.blosc.org.

The process of finding optimal compression parameters in Blosc2 can be slow because of the large number of combinations of compression parameters (codec, compression level, filter, split mode, number of threads, etc.). This can require a significant amount of trial and error to find the best combinations. However, you can significantly accelerate this process by training a neural network on your own datasets.

To begin the training process, provide your datasets to the Blosc Development Team. We will then perform the training and provide neural network models tailored to your needs, along with general tuning advice for Blosc2. In exchange, we request financial contributions to the project.

If interested, please contact us at contact@blosc.org.

Install the Btune wheel

Btune uses a Python wheel for installation, but it can be used from any application that uses C-Blosc2, whether it is in C, Python, or any other language. Currently, only Linux and Mac installers are supported.

pip install blosc2-btune

Next, we will run an example for Python and then for C. To do so, change your current directory to examples from this repository.

cd examples

Using Btune from Python

To use Btune with Blosc2 in Python, you can do it either via environment variables or programmatically.

Via environment variables

• Set the BTUNE_TRADEOFF environment variable to a floating-point number between 0 (to optimize just for speed) and 1 (to optimize just for compression ratio).
• Additionally, you can use BTUNE_PERF_MODE to optimize for compression, decompression, or to achieve a balance between the two by setting it to COMP, DECOMP, or BALANCED, respectively.

BTUNE_TRADEOFF=0.5 BTUNE_PERF_MODE=COMP python create_ndarray.py
WARNING: Empty metadata, no inference performed
NDArray succesfully created!

This creates a NDArray on disk with some data. The warning message Empty metadata, no inference performed can be ignored, as we are not using trained models yet.

Programmatically

Set cparams={"tuner": blosc2.Tuner.BTUNE} when creating the array like in the btune_config.py script. We will visit this example later in this section.

Enabling tracing

You can set BTUNE_TRACE=1 to see what Btune is doing:

BTUNE_TRACE=1 BTUNE_TRADEOFF=0.5 BTUNE_PERF_MODE=COMP python create_ndarray.py
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Btune version: 1.0.3.dev
Performance Mode: COMP, Compression tradeoff: 0.500000, Bandwidth: 20 GB/s
Behaviour: Waits - 0, Softs - 5, Hards - 10, Repeat Mode - STOP
TRACE: Environment variable BTUNE_MODELS_DIR is not defined
WARNING: Empty metadata, no inference performed
|    Codec   | Filter | Split | C.Level | Blocksize | Shufflesize | C.Threads | D.Threads |   Score   |  C.Ratio   |   Btune State   | Readapt | Winner
|        lz4 |      0 |     1 |       8 |         0 |           8 |        16 |        16 |  0.000881 |      2.17x |    CODEC_FILTER |    HARD | W
|        lz4 |      0 |     0 |       8 |         0 |           8 |        16 |        16 |  0.000644 |      2.18x |    CODEC_FILTER |    HARD | W
|        lz4 |      1 |     1 |       8 |         0 |           8 |        16 |        16 |  0.000346 |      4.19x |    CODEC_FILTER |    HARD | W
|        lz4 |      1 |     0 |       8 |         0 |           8 |        16 |        16 |  0.000207 |      4.12x |    CODEC_FILTER |    HARD | -
|        lz4 |      2 |     1 |       8 |         0 |           8 |        16 |        16 |  0.000496 |      4.77x |    CODEC_FILTER |    HARD | W
|        lz4 |      2 |     0 |       8 |         0 |           8 |        16 |        16 |  0.000342 |       4.7x |    CODEC_FILTER |    HARD | -
|    blosclz |      0 |     1 |       8 |         0 |           8 |        16 |        16 |   0.00073 |      2.18x |    CODEC_FILTER |    HARD | -
|    blosclz |      0 |     0 |       8 |         0 |           8 |        16 |        16 |  0.000657 |       2.2x |    CODEC_FILTER |    HARD | -
|    blosclz |      1 |     1 |       8 |         0 |           8 |        16 |        16 |  0.000242 |      4.19x |    CODEC_FILTER |    HARD | -
|    blosclz |      1 |     0 |       8 |         0 |           8 |        16 |        16 |  0.000465 |      1.06x |    CODEC_FILTER |    HARD | -
|    blosclz |      2 |     1 |       8 |         0 |           8 |        16 |        16 |  0.000362 |       4.2x |    CODEC_FILTER |    HARD | -
|    blosclz |      2 |     0 |       8 |         0 |           8 |        16 |        16 |   0.00049 |      1.06x |    CODEC_FILTER |    HARD | -
|        lz4 |      2 |     1 |       8 |         0 |           8 |        16 |        16 |   0.00031 |      4.77x |    THREADS_COMP |    HARD | W
|        lz4 |      2 |     1 |       7 |         0 |           8 |        16 |        16 |  0.000284 |      4.78x |          CLEVEL |    HARD | W
|        lz4 |      2 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000291 |      4.78x |          CLEVEL |    HARD | -
|        lz4 |      2 |     1 |       4 |         0 |           8 |        16 |        16 |  0.000344 |      4.77x |          CLEVEL |    SOFT | -
|        lz4 |      2 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000334 |      4.78x |          CLEVEL |    SOFT | -
|        lz4 |      2 |     1 |       6 |         0 |           8 |        16 |        16 |  0.000398 |      4.78x |          CLEVEL |    SOFT | W
|        lz4 |      2 |     1 |       7 |         0 |           8 |        16 |        16 |  0.000357 |      4.78x |          CLEVEL |    SOFT | -
|        lz4 |      2 |     1 |       8 |         0 |           8 |        16 |        16 |   0.00048 |      4.78x |          CLEVEL |    SOFT | W
NDArray 'rand_int.b2nd' succesfully created!

You can see in the column Winner if the combination is a winner (W), it does not improve the previous winner (-). When Btune finds a special value chunk (i.e. the chunk is made of repeated values that are encoded in a special way), it outputs S, meaning that Btune cannot determine whether this is a winner or not (it is not compressed in the regular way).

Btune Models

The Blosc Development Team offers Btune Models, a service in which we provide neural network models trained specifically for your data to determine the optimal combination of codecs and filters. To use these models, set BTUNE_MODELS_DIR to the directory containing the models files after the Blosc Development Team has completed training. Btune will then automatically use the trained model; keep reading for how this works.

To determine the number of chunks for performing inference, use BTUNE_USE_INFERENCE. If set to -1, it performs inference on all chunks. If set to a number greater than 0, it performs inference on this number of chunks and then tweaks parameters for the rest of the chunks. If set to 0, it does not perform inference at all. The default is -1.

BTUNE_TRADEOFF=0.5 BTUNE_PERF_MODE=COMP BTUNE_TRACE=1  BTUNE_MODELS_DIR=./models/ BTUNE_USE_INFERENCE=3 python create_ndarray.py
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Btune version: 1.0.3.dev
Performance Mode: COMP, Compression tradeoff: 0.500000, Bandwidth: 20 GB/s
Behaviour: Waits - 0, Softs - 5, Hards - 10, Repeat Mode - STOP
INFO: Model files found in the './models/' directory
INFO: Created TensorFlow Lite XNNPACK delegate for CPU.
TRACE: time load model: 0.000629
TRACE: Inference category=7 codec=1 filter=35 clevel=5 splitmode=2 time entropy=0.000798 inference=0.000015
|    Codec   | Filter | Split | C.Level | Blocksize | Shufflesize | C.Threads | D.Threads |   Score   |  C.Ratio   |   Btune State   | Readapt | Winner
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000624 |      4.19x |    CODEC_FILTER |    HARD | W
TRACE: Inference category=7 codec=1 filter=35 clevel=5 splitmode=2 time entropy=0.000221 inference=0.000004
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000216 |      4.19x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=7 codec=1 filter=35 clevel=5 splitmode=2 time entropy=0.000105 inference=0.000003
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000137 |      4.19x |    CODEC_FILTER |    HARD | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000143 |      4.19x |    CODEC_FILTER |    HARD | -
|        lz4 |     35 |     0 |       5 |         0 |           8 |        16 |        16 |  0.000148 |      4.12x |    CODEC_FILTER |    HARD | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000178 |      4.19x |    THREADS_COMP |    HARD | W
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000164 |      4.19x |          CLEVEL |    HARD | -
|        lz4 |     35 |     1 |       6 |         0 |           8 |        16 |        16 |  0.000169 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000163 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       4 |         0 |           8 |        16 |        16 |  0.000163 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000158 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       6 |         0 |           8 |        16 |        16 |  0.000157 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |   0.00016 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       4 |         0 |           8 |        16 |        16 |  0.000159 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |   0.00017 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       6 |         0 |           8 |        16 |        16 |  0.000175 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000189 |      4.19x |          CLEVEL |    SOFT | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |   0.00021 |      4.19x |    CODEC_FILTER |    HARD | -
|        lz4 |     35 |     0 |       5 |         0 |           8 |        16 |        16 |  0.000213 |      4.12x |    CODEC_FILTER |    HARD | -
|        lz4 |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000235 |      4.19x |    THREADS_COMP |    HARD | -
NDArray 'rand_int.b2nd' succesfully created!

Using Btune Models usually leads to significantly better performance scores, as demonstrated by the table above. Moreover, the process of finding the best combination is much faster with trained models. See https://btune.blosc.org for more info.

Configuring Btune programmatically from Python

If you want to use different configurations for different Blosc2 data containers in the same script, you can do it configuring Btune from Python instead of using the environment variables. To do so, you will have to set the desired configuration by passing it as keyword arguments to the set_params_defaults function:

kwargs = {"tradeoff": 0.3, "perf_mode": blosc2_btune.PerformanceMode.DECOMP}
blosc2_btune.set_params_defaults(**kwargs)

And then, tell Blosc2 you want to use Btune with cparams={"tuner": blosc2.Tuner.BTUNE}:

ba = blosc2.asarray(a, urlpath=urlpath, mode="w", chunks=(1e6,), cparams={"tuner": blosc2.Tuner.BTUNE})

See an output example when activating the BTUNE_TRACE environment variable:

BTUNE_TRACE=1 python btune_config.py
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Btune version: 1.0.3.dev
Performance Mode: DECOMP, Compression tradeoff: 0.300000, Bandwidth: 20 GB/s
Behaviour: Waits - 0, Softs - 5, Hards - 10, Repeat Mode - STOP
INFO: Model files found in the './models/' directory
INFO: Created TensorFlow Lite XNNPACK delegate for CPU.
TRACE: time load model: 0.000494
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.001187 inference=0.000011
|    Codec   | Filter | Split | C.Level | Blocksize | Shufflesize | C.Threads | D.Threads |   Score   |  C.Ratio   |   Btune State   | Readapt | Winner
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000932 |      4.06x |    CODEC_FILTER |    HARD | W
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000302 inference=0.000006
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000832 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000179 inference=0.000004
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000735 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000158 inference=0.000005
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000732 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000129 inference=0.000003
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000597 |      4.06x |    CODEC_FILTER |    HARD | W
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000214 inference=0.000004
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000743 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000226 inference=0.000005
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000814 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000206 inference=0.000005
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000724 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000169 inference=0.000004
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000674 |      4.06x |    CODEC_FILTER |    HARD | -
TRACE: Inference category=3 codec=0 filter=35 clevel=5 splitmode=2 time entropy=0.000159 inference=0.000004
|    blosclz |     35 |     1 |       5 |         0 |           8 |        16 |        16 |  0.000708 |      4.06x |    CODEC_FILTER |    HARD | -
NDArray 'btune_config.b2nd' succesfully created!

Here we set the tradeoff to 0.3 and the performance mode to DECOMP.

Using Btune from C

You can also use Btune from C. Similar to the Python examples above, you can activate it by setting the BTUNE_TRADEOFF environment variable. Alternatively, you can set the tuner_id in the compression parameters, also known as cparams, to the value of BLOSC_BTUNE. This will use the default Btune configuration. However, running Btune from C offers the advantage of being able to tune way more parameters, depending on your preferences:

    // compression params
    blosc2_cparams cparams = BLOSC2_CPARAMS_DEFAULTS;
    cparams.nthreads = 16; // Btune may lower this
    cparams.typesize = schunk_in->typesize;

    // btune
    btune_config btune_config = BTUNE_CONFIG_DEFAULTS;
    //btune_config.perf_mode = BTUNE_PERF_DECOMP;
    btune_config.tradeoff = .5;
    btune_config.behaviour.nhards_before_stop = 10;
    btune_config.behaviour.repeat_mode = BTUNE_REPEAT_ALL;
    btune_config.use_inference = 2;
    char *models_dir = "./models/";
    strcpy(btune_config.models_dir, models_dir);
    cparams.tuner_id = BLOSC_BTUNE;
    cparams.tuner_params = &btune_config;

    // Create super chunk
    blosc2_dparams dparams = BLOSC2_DPARAMS_DEFAULTS;
    dparams.nthreads = 1;
    blosc2_storage storage = {
        .cparams=&cparams,
        .dparams=&dparams,
        .contiguous=true,
        .urlpath=(char*)out_fname
    };
    blosc2_schunk* schunk_out = blosc2_schunk_new(&storage);

See the full example in examples/btune_example.c. You can compile and run this example as follows:

Linux

gcc -o btune_example btune_example.c -lblosc2 -lm -I $CONDA_PREFIX/include/ -L $CONDA_PREFIX/lib64/
BTUNE_TRACE=1 LD_LIBRARY_PATH=$CONDA_PREFIX/lib64 ./btune_example rand_int.b2nd out.b2nd

MacOS

gcc -o btune_example btune_example.c -lblosc2 -lm -I $CONDA_PREFIX/include/ -L $CONDA_PREFIX/lib/
BTUNE_TRACE=1 DYLD_LIBRARY_PATH=$CONDA_PREFIX/lib ./btune_example rand_int.b2nd out.b2nd

Platform support

Right now, we support Btune on Intel/ARM64 Linux and Intel/ARM64 Mac, and we are providing binary wheels for these.