bluepy3 0.2.0

Python module for interfacing with BLE devices through Bluez

# bluepy3

[](https://pypi.org/project/bluepy3) [](https://pypi.org/project/bluepy3) [](https://pypistats.org/packages/bluepy3) [](https://github.com/psf/black)

This is a Python3 library to allow communication with Bluetooth Low Energy devices on Linux.

Note: If you are reading this on [PyPi](https://pypi.org/project/bluepy3/) then note that the formatting below looks terrible. Visit the project’s homepage to read the correctly formatted [README.md](https://github.com/Mausy5043/bluepy3#readme) file.

## Requirements

Please be aware that this is not a beginners or n00bs tool. Some experience with Linux CLI, Python3 and BT/BLE is expected.

The package requires Python 3 v3.7 or higher to be installed.

The code needs an executable bluepy3-helper to be compiled from C source. This is done automatically if you use the recommended pip installation method (see below). Otherwise, you can rebuild it using the Makefile in the bluepy3 directory.

On Raspberry Pi (Debian flavours like: dietpi & raspbian) additional APT packages are required and can be installed with: `(bash) sudo apt-get install libbluetooth-dev `

To rebuild uuids.json the Python3 modules bs4, requests and lxml need to be installed. `(python3) python3 -m pip install bs4 lxml requests ` Then find where bluepy3 is installed and rebuild uuids.json thus: `(bash) cd some_path_name/site-packages/bluepy3/ make uuids.json `

## Installation

To install the current released version, on most Debian-based systems: `(bash) sudo apt-get install libglib2.0-dev libbluetooth-dev python3 -m pip install --upgrade bluepy3 sudo setcap cap_net_raw,cap_net_admin+ep bluepy3-helper ` Then test the installation using `(bash) blescan -n ` This should list all (compatible) Bluetooth device in range.

It may be considered to have command-line tools from BlueZ available for debugging. There are instructions for building BlueZ on the Raspberry Pi at http://www.elinux.org/RPi_Bluetooth_LE.

## Troubleshooting

Make sure the user is part of the bluetooth group. Use hciconfig to confirm that the device actually exists. This should output something like: ` hci0: Type: Primary Bus: UART BD Address: B8:27:EB:90:4F:F5 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:15332515 acl:452626 sco:0 events:333729 errors:0 TX bytes:7376962 acl:438075 sco:0 commands:72113 errors:0 ` Use hciconfig [hci0] up to activate the BT device if the above returns an error.

## Documentation

Documentation can be built from the sources in the docs/ directory using Sphinx.

## License

See [LICENSE](LICENSE)

## Acknowledgements

This work builds on previous work by [Ian Harvey](https://github.com/IanHarvey/bluepy) and uses code by the [BleuZ project](http://www.bluez.org/) (not a https site) and the more up-to-date [BleuZ on GitHub](https://github.com/bluez/bluez)

Original source code and documentation can be found at:

https://github.com/IanHarvey/bluepy http://ianharvey.github.io/bluepy-doc/

MIT License

Copyright (c) 2023 Maurice (mausy5043) Hendrix

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.