Skip to main content

No project description provided

Project description

# BrewBlox Service for the Tilt Hydrometer

The [Tilt hydrometer](https://tilthydrometer.com/) is a wireless hydrometer and thermometer used to gather live readings of specific gravity and temperature when brewing beer.

[BrewBlox](https://brewpi.com/) is a modular brewery control system design to work with the BrewPi controller.

This brewBlox service integrates the Tilt hydrometer into BrewBlox.

## Usage

### Deploy the Tilt service on the BrewBlox stack

You need to add the service to your existing BrewBlox docker compose file.

```yaml
tilt:
image: j616s/brewblox-tilt:rpi-latest
restart: unless-stopped
privileged: true
depends_on:
- history
network_mode: host
command: -p 5001 --eventbus-host=172.17.0.1
volumes:
- ./tilt:/share
```

The brewblox-tilt docker images are available on docker hub.

Note that the image tag to use is:

- rpi-latest for the arm architecture (when deploying on a RaspberryPi)
- latest for the amd architecture

You'll also need to modify the eventbus entry in your existing BrewBlox docker compose file to look like this.

```yaml
eventbus:
image: arm32v6/rabbitmq:alpine
restart: unless-stopped
ports:
- "5672:5672"
```

Finally, you'll have to bring up the new service using

```bash
brewblox-ctl up
```

### Add to your graphs

Once the Tilt service receives data from your Tilt(s), it should be available as graph metrics in BrewBlox.

### Calibration

Calibration is optional. While the Tilt provides a good indication of fermentation progress without calibration, it's values can be less accurate than a traditional hydrometer. With calibration its accuracy is approximately that of a traditional hydrometer. If you wish to use your Tilt for anything beyond simple tracking of fermentation progress (e.g. stepping temperatures at a given SG value) it is recommended you calibrate your Tilt.

To calibrate your Tilt, you first need to create a folder for the calibration files to be stored in. The recommended folder is `./tilt` in the BrewBlox directory. You can use other directories but you should change the volume parameter for the Tilt service in your docker compose file accordingly. You can create the `tilt` directory by running the following command in the BrewBlox directory:-

```bash
mkdir tilt
```

**NOTE:** It is recommended you create the `tilt` folder before launching the Tilt service for the first time. Failure to do so will result in the docker service creating the folder as root. If this happens, use `chown` to change the user and group ownership of the `tilt` folder to match the rest of the BrewBlox directory.

If you wish to calibrate your Specific Gravity readings, create a file called `SGCal.csv` in the `tilt` directory with lines of the form:-

```
<colour>, <uncalibrated_value>, <calibrated_value>
```

The uncalibrated values are the raw values from the Tilt. The calibrated values are those from a known good hydrometer or calculated when creating your calibration solution. Calibration solutions can be made by adding sugar/DME to water a little at a time to increase the SG of the solution. You can take readings using a hydrometer and the Tilt app as you go. You can include calibration values for multiple colours of Tilt in the calibration file. A typical calibration file would look something like this:-

```
black, 1.000, 1.001
black, 1.001, 1.002
black, 1.002, 1.003
black, 1.003, 1.004
red, 1.000, 1.010
red, 1.001, 1.011
red, 1.002, 1.012
red, 1.003, 1.013
red, 1.004, 1.014
```

You will need multiple calibration points. We recommend at least 6 distributed evenly across your typical gravity range for each Tilt. For example, if you usually brew with a starting gravity of 1.050, you may choose to calibrate at the values 1.000, 1.010, 1.020, 1.030, 1.040, 1.050, and 1.060. The more calibration points you have, the more accurate the calibrated values the service creates will be. Strange calibrated values from the service are an indication you have used too few or poorly distributed calibration values.

Calibration values for temperature are placed in a file called `tempCal.csv` in the `tilt` directory and have the same structure. Temperature values in the calibration file MUST be in Fahrenheit. The tempCal file can also contain calibration values for multiple Tilts. Again, it should contain at least 6 points distributed evenly across your typical range. A typical tempCal file would look like this:-

```
black,39,40
black,46,48
black,54,55
black,60,62
black,68,70
black,75,76
```

Calibrated values will be logged in BrewBlox separately to uncalibrated values. If you don't provide calibration values for a given colour of Tilt, only uncalibrated values will be logged. You don't need to calibrate both temperature and SG. If you only want to provide calibration values for SG, that works fine. Calibrated temp values would not be generated in this case but calibrate SG values would.

It is also recommended that you re-calibrate SG whenever you change your battery. Different batteries and different placements of the sled inside the Tilt can affect the calibration.

## Limitations

As the Tilt does not talk directly to the BrewPi controller, you cannot use your Tilt to control the temperature of your system. This service currently only allows you to log values from the Tilt. To control your BrewPi/BrewBlox setup you will need a BrewPi temperature sensor.

## Development

You can build a docker container for x86 using the following:

```bash
bbt-localbuild
```

Or for ARM using the following:

```bash
bbt-localbuild --arch arm
```

You can then run this container using the following:

```bash
docker run --net=host --privileged -v ~/brewblox/tilt:/share j616s/brewblox-tilt:local
```

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for brewblox-tilt, version 1.1.0
Filename, size File type Python version Upload date Hashes
Filename, size brewblox-tilt-1.1.0.tar.gz (6.9 kB) File type Source Python version None Upload date Hashes View

Supported by

AWS AWS Cloud computing Datadog Datadog Monitoring DigiCert DigiCert EV certificate Facebook / Instagram Facebook / Instagram PSF Sponsor Fastly Fastly CDN Google Google Object Storage and Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Salesforce Salesforce PSF Sponsor Sentry Sentry Error logging StatusPage StatusPage Status page