Wrapper for Brother networked label printing commands.
Project description
python-brotherprint
===================
Brother networked label printers library for Python
This was developed for the QL-580N but I've heard it also works for the following:
*QL-720NW
Usage
=====
This library supports two printing modes. ESC/P commands, and templates. I highly recommend using templates, because it is easier to manage, and offers more features. I will, however, go over both.
You should review the official Brother documentation [here (ESCP Docs)](http://www.mediafire.com/?3wbanr34bsr18dw) and [here (Template Command Docs)](http://www.mediafire.com/?v798mue7i58ed66), to know what is available.
## Setup
Regardless of which mode you are using, you need to intialize and connect a socket object, and pass the resulting socket object to the BrotherLabel object instantiator.
f_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
f_socket.connect((<ip_address>,<port (9100 by default for QL580N)>))
printjob = BrotherPrint(f_socket)
### ESC/P Printing
Invoke escp commands through certain BrotherLabel object methods (see actual file for method descriptions)
Make sure to end with the print page command, signifying the end of a label.
printjob.command_mode()
printjob.initialize()
printjob.bold('on')
printjob.send(<text>)
printjob.print_page(<cut_setting>)
### Template Printing
Create your template and upload it to the printer. After creating a BrotherLabel object, call template_mode() to set the printer to template mode, and then use the template commands to fill in your label.
printjob.template_mode()
printjob.template_init()
printjob.choose_template(<template_number>)
printjob.select_and_insert(<field_name>, <data>)
printjob.select_and_insert(<field_name2>, <data2>)
printjob.select_and_insert(<field_name3>, <data3>)
printjob.template_print()
===================
Brother networked label printers library for Python
This was developed for the QL-580N but I've heard it also works for the following:
*QL-720NW
Usage
=====
This library supports two printing modes. ESC/P commands, and templates. I highly recommend using templates, because it is easier to manage, and offers more features. I will, however, go over both.
You should review the official Brother documentation [here (ESCP Docs)](http://www.mediafire.com/?3wbanr34bsr18dw) and [here (Template Command Docs)](http://www.mediafire.com/?v798mue7i58ed66), to know what is available.
## Setup
Regardless of which mode you are using, you need to intialize and connect a socket object, and pass the resulting socket object to the BrotherLabel object instantiator.
f_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
f_socket.connect((<ip_address>,<port (9100 by default for QL580N)>))
printjob = BrotherPrint(f_socket)
### ESC/P Printing
Invoke escp commands through certain BrotherLabel object methods (see actual file for method descriptions)
Make sure to end with the print page command, signifying the end of a label.
printjob.command_mode()
printjob.initialize()
printjob.bold('on')
printjob.send(<text>)
printjob.print_page(<cut_setting>)
### Template Printing
Create your template and upload it to the printer. After creating a BrotherLabel object, call template_mode() to set the printer to template mode, and then use the template commands to fill in your label.
printjob.template_mode()
printjob.template_init()
printjob.choose_template(<template_number>)
printjob.select_and_insert(<field_name>, <data>)
printjob.select_and_insert(<field_name2>, <data2>)
printjob.select_and_insert(<field_name3>, <data3>)
printjob.template_print()
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
brotherprint-0.1.1.tar.gz
(8.7 kB
view hashes)