Skip to main content

The Continuous Integration Framework

Project description

Site:https://buildbot.net
Original author:
 Brian Warner <warner-buildbot @ lothar . com>
Current maintainer:
 Dustin J. Mitchell <dustin@buildbot.net>

Buildbot is an open-source continuous integration framework for automating software build, test, and release processes.

  • Buildbot is easy to set up, but very extensible and customizable. It supports arbitrary build processes, and is not limited to common build processes for particular languages (e.g., autotools or ant)
  • Buildbot supports building and testing on a variety of platforms. Developers, who do not have the facilities to test their changes everywhere before committing, will know shortly afterwards whether they have broken the build or not.
  • Buildbot allows to track various metrics (warning counts, lint checks, image size, compile time, etc) over time.
  • Buildbot has minimal requirements for workers: using virtualenv, only a Python installation is required.
  • Workers can be run behind a NAT firewall and communicate with the master.
  • Buildbot has a variety of status-reporting tools to get information about builds in front of developers in a timely manner.

Documentation

See https://docs.buildbot.net/current/ for documentation of the current version of Buildbot.

Docker container

Buildbot comes with a ready to use docker container available at buildbot/buildbot-master Following environment variables are supported for configuration:

  • BUILDBOT_CONFIG_URL: http url to a config tarball.
    The tarball must be in the .tar.gz format. The tarball must contain a directory, which will contain a master.cfg file in it. The tarball may contain a twisted.tac file in it, which can be used to configure the twisted logging system (e.g to log in logstash instead of the default stdout). The tarball will be extracted in a directory named $BUILDBOT_CONFIG_DIR in the master directory, and can contain additional python module that the master.cfg can load. If BUILDBOT_CONFIG_URL does not end with .tar.gz, it is considered to be an URL to the direct master.cfg
  • BUILDBOT_CONFIG_DIR directory where to extract the config tarball within the master directory. It is important so that you can do relative imports in your master.cfg like it is done in the metabbotcfg (https://github.com/buildbot/metabbotcfg)

Requirements

See https://docs.buildbot.net/current/manual/installation/index.html

Briefly: python, Twisted, Jinja2, simplejson, and SQLite. Simplejson and SQLite are included with recent versions of Python.

Support

Please send questions, bugs, patches, etc, to the buildbot-devel mailing list reachable through https://buildbot.net/, so that everyone can see them.

Copying

Buildbot is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

For full details, please see the file named COPYING in the top directory of the source tree. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

Release history Release notifications

History Node

1.3.0

History Node

1.2.0

History Node

1.1.2

History Node

1.1.1

History Node

1.1.0

History Node

1.0.0

History Node

0.9.15.post1

History Node

0.9.15

History Node

0.9.14

History Node

0.9.13

History Node

0.9.12

This version
History Node

0.9.11

History Node

0.9.10

History Node

0.9.9.post2

History Node

0.9.9.post1

History Node

0.9.9

History Node

0.9.8

History Node

0.9.7

History Node

0.9.6

History Node

0.9.5

History Node

0.9.4

History Node

0.9.3

History Node

0.9.2

History Node

0.9.1

History Node

0.9.0.post1

History Node

0.9.0

History Node

0.9.0rc4

History Node

0.9.0rc3

History Node

0.9.0rc2

History Node

0.9.0rc1

History Node

0.9.0b9

History Node

0.9.0b8

History Node

0.9.0b7

History Node

0.9.0b6

History Node

0.9.0b5

History Node

0.9.0b4

History Node

0.9.0b3

History Node

0.9.0b2

History Node

0.9.0b1

History Node

0.8.14

History Node

0.8.13

History Node

0.8.12

History Node

0.8.10

History Node

0.8.9

History Node

0.8.8

History Node

0.8.7

History Node

0.8.6

History Node

0.8.5

History Node

0.8.4

History Node

0.8.3

History Node

0.8.2

History Node

0.8.1

History Node

0.8.0

History Node

0.7.12

History Node

0.7.11

History Node

0.7.10

History Node

0.7.9

History Node

0.7.8

History Node

0.7.7

History Node

0.7.6

History Node

0.7.5

History Node

0.7.3

History Node

0.8.7p1

History Node

0.8.6p1

History Node

0.8.4p2

History Node

0.8.4p1

History Node

0.8.3p1

History Node

0.8.1p1

History Node

0.7.11p3

History Node

0.7.11p2

History Node

0.7.11p1

History Node

0.7.10p1

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Filename, size & hash SHA256 hash help File type Python version Upload date
buildbot-0.9.11-py2.py3-none-any.whl (781.4 kB) Copy SHA256 hash SHA256 Wheel py2.py3 Sep 8, 2017
buildbot-0.9.11.tar.gz (3.1 MB) Copy SHA256 hash SHA256 Source None Sep 8, 2017

Supported by

Elastic Elastic Search Pingdom Pingdom Monitoring Google Google BigQuery Sentry Sentry Error logging CloudAMQP CloudAMQP RabbitMQ AWS AWS Cloud computing DataDog DataDog Monitoring Fastly Fastly CDN DigiCert DigiCert EV certificate StatusPage StatusPage Status page