camply

camply, the campsite finder 🏕

These details have not been verified by PyPI

Project links

Project description

camply, the campsite finder ⛺️, is a tool to help you book a campground online. Finding reservations at sold out campgrounds can be tough. That's where camply comes in. It searches the APIs of booking services like https://recreation.gov (which indexes thousands of campgrounds across the USA) to continuously check for cancellations and availabilities to pop up. Once a campsite becomes available, camply sends you a notification to book your spot!

Check Out The Docs

Installation
Command Line Usage
Finding Recreation Areas IDs and Campground IDs To Search Without Using the Command Line
Object-Oriented Usage (Python)
- Search for a Recreation.gov Campsite
- Continuously Search for Recreation.gov Campsites
Running in Docker
Dependencies

Installation

PyPI

pip install camply

PyPI Link

Docker

docker pull juftin/camply

Docker Hub Link

**see Running in Docker below.

Building Locally

git clone https://github.com/juftin/camply.git
cd camply
python setup.py install

Command Line Usage

When installed, camply's command line utility can be invoked with the command, camply. The CLI tool accepts one of four sub-arguments: campsites, recreation-areas, campgrounds, and configure.

❯ camply --help

Usage: camply [OPTIONS] COMMAND [ARGS]...

  Welcome to camply, the campsite finder.

  Finding reservations at sold out campgrounds can be tough. That's where
  camply comes in. It searches the APIs of booking services like
  https://recreation.gov (which indexes thousands of campgrounds across the
  USA) to continuously check for cancellations and availabilities to pop up.
  Once a campsite becomes available, camply sends you a notification to book
  your spot!

  visit the camply documentation at https://github.com/juftin/camply

Options:
  --version             Show the version and exit.
  --debug / --no-debug  Enable extra debugging output.
  --help                Show this message and exit.

Commands:
  campgrounds       Search for Campgrounds (inside of Recreation Areas)...
  campsites         Find available Campsites using search criteria
  configure         Set up camply configuration file with an interactive...
  recreation-areas  Search for Recreation Areas and list them

`campsites`

Search for a campsite within camply. Campsites are returned based on the search criteria provided. Campsites contain properties like booking date, site type (tent, RV, cabin, etc), capacity, price, and a link to make the booking. Required parameters include --start-date, --end-date, --rec-area / --campground / --campsite. Constant searching functionality can be enabled with --continuous and notifications via Email, Pushover, Pushbullet, and Telegram can be enabled using --notifications.

Arguments

--rec-area: RECREATION_AREA_ID
- Add Recreation Areas (comprised of campgrounds) by ID. **example
--campground: CAMPGROUND_ID
- Add individual Campgrounds by ID. **example
--campsite: CAMPSITE_ID
- Add individual Campsites by ID. **example
--start-date: START_DATE
- YYYY-MM-DD: Start of Search window. You will be arriving this day. **example
--end-date: END_DATE
- YYYY-MM-DD: End of Search window. You will be checking out this day.. **example
--weekends
- Only search for weekend bookings (Fri/Sat nights). **example
--nights
- Search for campsite stays with consecutive nights. Defaults to 1 which returns all campsites found. **example
--provider: PROVIDER
- Camping Search Provider. Options available are 'Yellowstone' and 'RecreationDotGov'. Defaults to 'RecreationDotGov', not case-sensitive. **example
--continuous
- Continuously check for a campsite to become available, and quit once at least one campsite is found. **example
--search-forever
- If --continuous is activated, this method continues to search after the first availability has been found. The one caveat is that it will never notify about the same identical campsite for the same booking date. **example
--notifications: NOTIFICATIONS
- If --continuous is activated, types of notifications to receive. Options available areemail, pushover, pushbullet, telegram, or silent. Defaults to silent - which just logs messages to console. **example
--equipment
- Search for campsites compatible with your camping equipment. This argument accepts two options, the equipment name and its length If you don't want to filter based on length provide a length of 0. Accepted equipment names include Tent, RV. Trailer, Vehicle and are not case-sensitive. **example
--notify-first-try
- If --continuous is activated, whether to send all non-silent notifications if more than 5 matching campsites are found on the first try. Defaults to false which only sends the first5. **example
--polling-interval: POLLING_INTERVAL
- If --continuous is activated, how often to wait in between checks (in minutes). Defaults to 10, cannot be less than 5. **example
--yml-config
- Rather than provide arguments to the command line utility, instead pass a file path to a YAML configuration file. See the documentation for more information on how to structure your configuration file. **example

camply campsites \
    --rec-area 2725 \
    --start-date 2022-07-10 \
    --end-date 2022-07-18

`recreation-areas`

Search for Recreation Areas and their IDs. Recreation Areas are places like National Parks and National Forests that can contain one or many campgrounds.

Arguments:

--search SEARCH
- Search for Campgrounds or Recreation Areas by search string.
--state STATE
- Filter by US state code.

camply recreation-areas --search "Yosemite National Park"

**see the examples for more information

`campgrounds`

Search for Campgrounds and their IDs. Campgrounds are facilities inside of Recreation Areas that contain campsites. Most 'campgrounds' are areas made up of multiple campsites, others are facilities like fire towers or cabins that might only contain a single 'campsite' to book.

Arguments:

--search SEARCH
- Search for Campgrounds or Recreation Areas by search string.
--state STATE
- Filter by US state code.
--rec-area: RECREATION_AREA_ID
- Add Recreation Areas (comprised of campgrounds) by ID.
--campground: CAMPGROUND_ID
- Add individual Campgrounds by ID.

camply campgrounds --search "Fire Tower Lookout" --state CA

**see the examples for more information

`configure`

Set up camply configuration file with an interactive console

In order to send notifications through camply you must set up some authorization values. Whether you need to set up Pushover notifications , PushBullet, Telegram, or Email messages, everything can be done through the configure command. The end result is a file called .camply in your home folder. See the Running in Docker section to see how you can use environment variables instead of a config file.

camply configure

Examples

Read through the examples below to get a better understanding of camply, its features, and the functionality of the different arguments provided to the CLI.

Searching for a Campsite

The below search looks for campsites inside of Recreation Area ID #2725 (Glacier National Park) between 2022-07-10 and 2022-07-17. The search will be performed once and any results will be logged to the console. camply searches for campsites inside of search windows in increments of one night. --start-date and --end-date define the bounds of the search window, you will be leaving the day after --end-date.

camply campsites \
    --rec-area 2725 \
    --start-date 2022-07-10 \
    --end-date 2022-07-18

Searching for a Campsite by Campground ID

The below search looks for across three campgrounds (all inside Glacier National Park) between 2022-07-10 and 2022-07-17. Multiple Campgrounds (and Recreation Areas too) can be found by supplying the arguments more than once.

camply campsites \
    --campground 232493 \
    --campground 251869 \
    --campground 232492 \
    --start-date 2022-07-10 \
    --end-date 2022-07-18

Searching for a Specific Campsite by ID

Sometimes you have a favorite campsite inside your favorite campground. To search for just a specific campsite (and not just all campsites within a campground) you can give its ID to camply with the --campsite argument. For example, site R035 in Many Glacier Campground, MT is close to a trailhead. Its URL is https://www.recreation.gov/camping/campsites/98363 , here we can see that it's ID is 98363. You can search for one or many campsites by ID by supplying the --campsite argument. You can provide the --campsite argument once or multiple times to search for different campsites. Note, --campsite arguments override any --rec-area or --campground parameters provided.

camply campsites \
    --campsite 98363 \
    --start-date 2022-07-10 \
    --end-date 2022-07-18

Continuously Searching for A Campsite

Sometimes you want to look for campgrounds until an eventual match is found. The below snippet will search for matching campsites until it finds a match. It also sends a notification via pushover once matches are found. Alternate notification methods are email, pushbullet, telegram, and silent ( default).

Important Note: When camply is told to run --continuous with non-silent notifications set up and it finds more than 5 matching campsites on the first try, it will only send notifications for the first 5 campsites. This is to prevent thousands of campsites flooding your notifications. It's always encouraged to perform an initial online search before setting up a camply search. To bypass this behavior and send all notifications, pass the --notify-first-try argument.

camply campsites \
    --rec-area 2725 \
    --start-date 2022-07-12 \
    --end-date 2022-07-13 \
    --continuous \
    --notifications pushover \
    --notify-first-try

Continue Looking After The First Match Is Found

Sometimes you want to search for all possible matches up until your arrival date. No problem. Add the --search-forever and camply won't stop sending notifications after the first match is found. One important note, camply will save and store all previous notifications when --search-forever is enabled, so it won't notify you about the exact same campsite availability twice. This can be problematic when certain campsites become available more than once.

camply campsites \
    --rec-area 2725 \
    --start-date 2022-07-01 \
    --end-date 2022-08-01 \
    --continuous \
    --notifications pushover \
    --search-forever

Send a Push Notification

camply supports notifications via Pushbullet, Pushover, Telegram, and Email. Pushbullet is a great option because it's a free and easy service to sign up for and it supports notifications across different devices and operating systems. Similar to Pushover, Pushbullet requires that you create an account and an API token, and share that token with camply through a configuration file (via the camply configure command) or though environment variables (PUSHBULLET_API_TOKEN).

camply campsites \
    --rec-area 2991 \
    --start-date 2022-09-10 \
    --end-date 2022-09-21 \
    --continuous \
    --notifications pushbullet

Send a Notification to Different Services

camply supports notifications from different providers. To send notifications to multiple providers just separate them with a comma. If you're adding spaces between the commas make sure to quote everything. You can also pass the --notifications parameter multiple times. YAML config entries also accept an array as well.

camply campsites \
    --rec-area 2991 \
    --start-date 2022-09-10 \
    --end-date 2022-09-21 \
    --continuous \
    --notifications pushover,email

camply campsites \
    --rec-area 2991 \
    --start-date 2022-09-10 \
    --end-date 2022-09-21 \
    --continuous \
    --notifications email \
    --notifications pushover

Look for Weekend Campsite Availabilities

This below search looks across larger periods of time, but only if a campground is available to book on a Friday or Saturday night (--weekends). It also uses the --polling-interval argument which checks every 5 minutes instead of the default 10 minutes.

camply campsites \
    --rec-area 2991 \
    --start-date 2022-05-01 \
    --end-date 2022-08-01 \
    --weekends \
    --continuous \
    --notifications email \
    --polling-interval 5

Look for Consecutive Nights at the Same Campsite

A lot of times you need to search for consecutive nights at the same campsite. By default, any and all campsites with a single nights booking are returned by camply. To search for campsites with consecutive night stays, pass the --nights argument.

Note, the --nights argument handles issues with improper search parameters. For example, if you set the --weekends parameter the maximum number of consecutive nights possible is 2. If you supply more than this your --nights parameter will be overwritten to 2.

camply campsites \
    --rec-area 2991 \
    --start-date 2022-05-01 \
    --end-date 2022-08-01 \
    --nights 4

Look for a Campsite Inside of Yellowstone

Yellowstone doesn't use https://recreation.gov to manage its campgrounds, instead it uses its own proprietary system. In order to search the Yellowstone API for campsites, make sure to pass the --provider "yellowstone" argument. This flag disables --rec-area argument.

To learn more about using camply to find campsites at Yellowstone, check out this discussion.

camply campsites \
    --provider yellowstone \
    --start-date 2022-07-09 \
    --end-date 2022-07-17 \
    --continuous

Look for a Campsite Across Multiple Recreation areas

You don't have to confine your search to a single Recreation or Campground ID. Adding multiple arguments to the command line will search across multiple IDs. Keep in mind that any --campground arguments will overwrite all --rec-area arguments.

camply campsites \
    --rec-area 2991 \
    --rec-area 1074 \
    --start-date 2022-07-09 \
    --end-date 2022-07-17 \
    --nights 5

Using a YML Configuration file to search for campsites

Sometimes, using a YAML configuration file is easier to manage all of your search options. See the below YML example file and corresponding camply command:

provider:         RecreationDotGov  # RecreationDotGov IF NOT PROVIDED
recreation_area: # (LIST OR SINGLE ENTRY)
  - 2991  # Yosemite National Park, CA (All Campgrounds)
  - 1074  # Sierra National Forest, CA (All Campgrounds)
campgrounds:      null  # ENTIRE FIELD CAN BE OMITTED IF NOT USED - (LIST OR SINGLE ENTRY)
campsites:        null   # OVERRIDES CAMPGROUNDS / RECREATION AREA - (LIST OR SINGLE ENTRY)
start_date:       2022-09-12  # YYYY-MM-DD
end_date:         2022-09-13  # YYYY-MM-DD
weekends:         false  # FALSE BY DEFAULT
nights:           1  # 1 BY DEFAULT
continuous:       true  # DEFAULTS TO TRUE
polling_interval: 5  # DEFAULTS TO 10 , CAN'T BE LESS THAN 5
notifications:    email  # (silent, email, pushover, pushbullet, and telegram), DEFAULTS TO `silent`
search_forever:   true  # FALSE BY DEFAULT
notify_first_try: false  # FALSE BY DEFAULT
equipment:        null # Array of Equipment Search Lists - DEFAULTS TO `null`

camply campsites --yml-config example_search.yml

Searching for a Campsite That Fits Your Equipment

Camply can help you filter campsites to fit your specific equipment, like a Trailer or an RV. Most likely, you care that the campsite fits the length of your RV so you can specify that as well. To search for specific equipment and its length provide the --equipment option with two arguments, the equipment name and the equipment length. If you don't want to filter based on length provide a length of zero. If you provide multiple --equipment options, sites matching any of your search equipment will be returned.

Current supported equipment names are Vehicle, Tent, RV, and Trailer. Be careful when filtering on Tents and Vehicle length, sometimes Recreation.gov doesn't provide that information, it is safer to set length to 0.

camply campsites \
    --rec-area 2991 \
    --start-date 2022-07-09 \
    --end-date 2022-07-17 \
    --nights 5 \
    --equipment RV 25

Here's what the above search would look like on a YAML Config:

recreation_area:
    - 2991
start_date:       2022-07-09
end_date:         2022-07-17
nights:           5
equipment:
    - [RV, 25]

Finally, here's a search that accommodates trailers of all lengths:

camply campsites \
    --rec-area 2991 \
    --start-date 2022-07-09 \
    --end-date 2022-07-17 \
    --nights 5 \
    --equipment Trailer 0

Search for Recreation Areas by Query String

Just need to find what your local Recreation Area ID number is? This simple command allows you to search and list recreation areas. It accepts --search and --state arguments.

camply recreation-areas --search "Yosemite National Park"

Look for Specific Campgrounds Within a Recreation Area

Need to get even more specific and search for a particular campground? This search lists campgrounds attached to a recreation area id --rec-area. It also accepts --search and --state arguments.

camply campgrounds --rec-area 2991

Look for Specific Campgrounds by Query String

The below search looks for Fire Lookout Towers to stay in inside of California.

camply campgrounds --search "Fire Tower Lookout" --state CA

Finding Recreation Areas IDs and Campground IDs To Search Without Using the Command Line

You can uncover campground and recreation area IDs just by using the https://recreation.gov search functionality. Use the below example for a campground within Glacier National Park.

First, perform your search on https://recreation.gov.

The above search will take you to a URL like this: https://www.recreation.gov/search?q=Glacier%20National%20Park&entity_id=2725&entity_type=recarea. Taking a closer look at the URL components you can see that Glacier National Park has the Recreation Area ID #2725.

Searching deeper into campgrounds inside of Glacier National Park you might find Fish Creek Campground at a URL like https://www.recreation.gov/camping/campgrounds/232493. Here, we can see that this campground has a Campground ID of #232493.

Object-Oriented Usage (Python)

Search for a Recreation.gov Campsite

from datetime import datetime
import logging
from typing import List

from camply.containers import AvailableCampsite, SearchWindow
from camply.search import SearchRecreationDotGov

logging.basicConfig(format="%(asctime)s [%(levelname)8s]: %(message)s",
                    level=logging.INFO)

month_of_june = SearchWindow(start_date=datetime(year=2022, month=6, day=1),
                             end_date=datetime(year=2022, month=6, day=30))
camping_finder = SearchRecreationDotGov(search_window=month_of_june,
                                        recreation_area=2725,  # Glacier Ntl Park
                                        weekends_only=False,
                                        nights=1)
matches: List[AvailableCampsite] = camping_finder.get_matching_campsites(log=True, verbose=True,
                                                                         continuous=False)

The above script returns a list of any matching AvailableCampsite pydantic objects:

[
    AvailableCampsite(campsite_id="5391",
                      booking_date=datetime.datetime(2022, 6, 13, 0, 0),
                      campsite_site_name="B37",
                      campsite_loop_name="Loop B",
                      campsite_type="STANDARD NONELECTRIC",
                      campsite_occupancy=(0, 8),
                      campsite_use_type="Overnight",
                      availability_status="Available",
                      recreation_area="Glacier National Park, MT",
                      recreation_area_id="2725",
                      facility_name="Fish Creek Campground",
                      facility_id="232493",
                      booking_url="https://www.recreation.gov/camping/campsites/5391")
]

Continuously Search for Recreation.gov Campsites

You'll notice that the get_matching_campsites function takes accepts parameter values very similar to the commandline arguments.

from datetime import datetime
import logging

from camply.containers import SearchWindow
from camply.search import SearchRecreationDotGov

logging.basicConfig(format="%(asctime)s [%(levelname)8s]: %(message)s",
                    level=logging.INFO)

month_of_june = SearchWindow(start_date=datetime(year=2022, month=6, day=1),
                             end_date=datetime(year=2022, month=6, day=30))
camping_finder = SearchRecreationDotGov(search_window=month_of_june,
                                        recreation_area=[2991, 1074],  # Multiple Rec Areas
                                        weekends_only=False,
                                        nights=3)
camping_finder.get_matching_campsites(log=True, verbose=True,
                                      continuous=True,
                                      polling_interval=5,
                                      notification_provider="pushover",
                                      search_forever=True,
                                      notify_first_try=False)

Running in Docker

Here's an example of a detached container searching in the background (notice the -d flag, the container will run detached).

docker run -d \
  --name camply-detached-example \
  --env PUSHOVER_PUSH_TOKEN=${PUSHOVER_PUSH_TOKEN} \
  --env PUSHOVER_PUSH_USER=${PUSHOVER_PUSH_USER} \
  --env TZ="America/Denver" \
  juftin/camply \
  camply campsites \
      --rec-area 2991 \
      --start-date 2022-08-01 \
      --end-date 2022-09-01 \
      --continuous \
      --notifications pushover

The docker image accepts the following environment variables:

Pushover Notifications
- PUSHOVER_PUSH_USER
Email Notifications
- EMAIL_TO_ADDRESS
- EMAIL_USERNAME
- EMAIL_PASSWORD
- EMAIL_FROM_ADDRESS (defaults to "camply@juftin.com")
- EMAIL_SUBJECT_LINE (defaults to "camply Notification")
- EMAIL_SMTP_SERVER (defaults to "smtp.gmail.com")
- EMAIL_SMTP_PORT (defaults to 465)
Optional Environment Variables
- LOG_LEVEL (sets logging level, defaults to "INFO")
- PUSHOVER_PUSH_TOKEN (Personal Pushover App Token)
- RIDB_API_KEY (Personal API Key for Recreation.gov API)
- TZ (TZ Database Name for logging, defaults to UTC)

Alternatively, if you have already run camply configure locally, you can share your .camply file inside the docker container.

docker run \
  --name camply-file-share-example \
  --env TZ="America/Denver" \
  --volume ${HOME}/.camply:/home/camply/.camply \
  juftin/camply \
  camply campsites \
      --provider yellowstone \
      --start-date 2022-07-22 \
      --end-date 2022-07-27 \
      --continuous \
      --notifications email

To manage multiple searches (with different notification preferences) I like to use YML configuration files:

docker run -d \
  --name camply-email-example \
  --env TZ="America/Denver" \
  --env EMAIL_TO_ADDRESS=${EMAIL_TO_ADDRESS} \
  --env EMAIL_USERNAME=${EMAIL_USERNAME} \
  --env EMAIL_PASSWORD=${EMAIL_PASSWORD} \
  --volume example_search.yml:/home/camply/example_search.yml \
  juftin/camply:latest \
  camply campsites \
      --yml-config /home/camply/example_search.yml

A docker-compose example of the above YML Config is also available.

Dependencies

camply is compatible with any Python version >= 3.6. Currently, there are eight required dependencies:

click
- The click package is used to leverage it's simple Command Line Interface API for camply
requests
- The requests package is used to fetch data from the APIs of Camping Booking Providers.
pandas
- The pandas package is to group and aggregate across large data sets of campsites, campgrounds, and recreation areas.
tenacity
- The tenacity package is used for retrying data searches on the underlying campsite APIs. This retrying methodology handles exceptions allowing for API downtime and facilitating exponential backoff.
rich
- Colorizing the CLI
python-dotenv
- The python-dotenv package reads key-value pairs from a .env file and can set them as environment variables - this helps with the .camply configuration file.
pydantic
- The pydantic package performs data validation against API responses and assists with fancy data containers for camply objects.
PyYAML
- PyYAML is a YAML parsing library - this helps with the YAML file campsite searches.

Recreation data provided by Recreation.gov

Project details

These details have not been verified by PyPI

Project links

Release history Release notifications | RSS feed

0.32.8

Jul 30, 2024

0.32.7

May 28, 2024

0.32.6

May 1, 2024

0.32.5

Apr 29, 2024

0.32.4

Apr 26, 2024

0.32.3

Apr 26, 2024

0.32.2

Feb 6, 2024

0.32.1

Jan 6, 2024

0.32.0

Jan 6, 2024

0.31.1

Oct 27, 2023

0.31.0

Sep 23, 2023

0.30.0

Sep 13, 2023

0.29.0

Jul 22, 2023

0.28.0

Jul 22, 2023

0.27.1

Jul 21, 2023

0.27.0

Jun 26, 2023

0.26.1

Jun 21, 2023

0.26.0

Jun 21, 2023

0.25.0

Jun 19, 2023

0.24.4

Jun 19, 2023

0.24.3

Jun 6, 2023

0.24.2

Jun 6, 2023

0.24.1

Jun 6, 2023

0.24.0

Jun 6, 2023

0.23.0

Jun 4, 2023

0.22.1

May 31, 2023

0.22.0

May 31, 2023

0.21.0

May 23, 2023

0.20.0

May 5, 2023

0.19.0

May 3, 2023

0.18.0

Apr 22, 2023

0.17.0

Apr 22, 2023

0.16.2

Apr 21, 2023

0.16.1

Apr 17, 2023

0.16.0

Mar 25, 2023

0.15.0

Mar 25, 2023

0.14.0

Feb 23, 2023

0.13.1

Feb 14, 2023

0.13.0

Feb 14, 2023

0.12.0

Feb 14, 2023

0.11.0

Feb 12, 2023

0.10.1

Feb 7, 2023

0.10.0

Feb 4, 2023

0.9.3

Jan 31, 2023

0.9.2

Jan 31, 2023

0.9.1

Jan 31, 2023

0.9.0

Jan 25, 2023

0.8.0

Dec 27, 2022

0.7.6

Dec 22, 2022

0.7.3

Nov 27, 2022

0.7.2

Nov 27, 2022

0.7.1

Oct 8, 2022

0.7.0

Oct 8, 2022

0.6.2

Sep 26, 2022

0.6.1

Sep 26, 2022

0.6.0

Sep 25, 2022

0.5.8

Sep 23, 2022

0.5.7

Sep 23, 2022

0.5.6

Aug 31, 2022

0.5.5

Aug 31, 2022

0.5.4

Aug 31, 2022

0.5.2

Aug 25, 2022

0.5.1

Aug 25, 2022

0.5.0

Aug 25, 2022

0.4.9

Aug 24, 2022

0.4.8

Jul 25, 2022

This version

0.4.7

Jul 24, 2022

0.4.6

Jul 12, 2022

0.4.5

Jul 11, 2022

0.4.4

Jul 4, 2022

0.4.3

Jul 1, 2022

0.4.2

Jun 30, 2022

0.4.1

Jun 28, 2022

0.4.0

Jun 28, 2022

0.3.1

May 19, 2022

0.3.0

Feb 28, 2022

0.2.4

Feb 15, 2022

0.2.3

Feb 1, 2022

0.2.2

Jan 28, 2022

0.2.1 yanked

Jan 28, 2022

Reason this release was yanked:

Incomplete YAML Config

0.2.0 yanked

Jan 28, 2022

Reason this release was yanked:

Broken Notification

0.1.15

Jan 19, 2022

0.1.14

Jan 13, 2022

0.1.13

Jan 13, 2022

0.1.12

Dec 2, 2021

0.1.10

Nov 4, 2021

0.1.9

Oct 19, 2021

0.1.8

Jul 20, 2021

0.1.7

Jun 24, 2021

0.1.6

Jun 24, 2021

0.1.5

Jun 3, 2021

0.1.4

Jun 2, 2021

0.1.3

May 26, 2021

0.1.2

May 25, 2021

0.1.1

May 19, 2021

0.1.0

May 19, 2021

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

camply-0.4.7.tar.gz (69.2 kB view hashes)

Uploaded Jul 24, 2022 Source

Built Distribution

camply-0.4.7-py3-none-any.whl (68.0 kB view hashes)

Uploaded Jul 24, 2022 Python 3

Hashes for camply-0.4.7.tar.gz

Hashes for camply-0.4.7.tar.gz
Algorithm	Hash digest
SHA256	`fe5c1f62bb80ffab8cfe652fe150204f52ea35281caf65348e100339e2a0b6ca`
MD5	`a6d627ee080c7270aa9f36b8dc568050`
BLAKE2b-256	`0a94cab413ebcd063df198e3f85af77f08ddd646c88227a10298109d75de9ff0`

Hashes for camply-0.4.7-py3-none-any.whl

Hashes for camply-0.4.7-py3-none-any.whl
Algorithm	Hash digest
SHA256	`776fbbd86f3f87d90dab71fee9d49c9eff1ef55c93887b88c13e2467e056ad0b`
MD5	`946b343fe09d88c703073b484b70513c`
BLAKE2b-256	`397c315ecc06e009278fa7123b340437788edacfc286dc3694a688cdddedf6b1`

camply 0.4.7

Navigation

Verified details

Maintainers

Unverified details

Project links

Meta

Classifiers

Project description

Check Out The Docs

Table of Contents

Installation

PyPI

Docker

Building Locally

Command Line Usage

campsites

Arguments

recreation-areas

Arguments:

campgrounds

Arguments:

configure

Examples

Searching for a Campsite

Searching for a Campsite by Campground ID

Searching for a Specific Campsite by ID

Continuously Searching for A Campsite

Continue Looking After The First Match Is Found

Send a Push Notification

Send a Notification to Different Services

Look for Weekend Campsite Availabilities

Look for Consecutive Nights at the Same Campsite

Look for a Campsite Inside of Yellowstone

Look for a Campsite Across Multiple Recreation areas

Using a YML Configuration file to search for campsites

Searching for a Campsite That Fits Your Equipment

Search for Recreation Areas by Query String

Look for Specific Campgrounds Within a Recreation Area

Look for Specific Campgrounds by Query String

Finding Recreation Areas IDs and Campground IDs To Search Without Using the Command Line

Object-Oriented Usage (Python)

Search for a Recreation.gov Campsite

Continuously Search for Recreation.gov Campsites

Running in Docker

Dependencies

Project details

Verified details

Maintainers

Unverified details

Project links

Meta

Classifiers

Release history Release notifications | RSS feed

Download files

Source Distribution

Built Distribution

`campsites`

`recreation-areas`

`campgrounds`

`configure`