cbpi4-LCDisplay 0.0.1

CraftBeerPi4 LCD Plugin

LCD add-on for CraftBeerPi 4

With this add-on you can display your Brewing steps temperatures on a 20x4 i2c LCD Display. In the future: In addition you can display the target-temperature and current-temperature of each fermenter.

This addon only works with I2C connected LCD Displays.

Installation

Wiring:

Display	PI
SDA	Pin 3 GPIO02(SDA1)
SCL	Pin 5 GPIO03(SDL1)
VCC	Pin 2 Power 5V
GND	Pin 6 GND

I2C Configuration:

Ensure to activate the I2C connection in Raspi configuration.

Software installation:

Navigate in the Linux console to the folder from which you start cbpi4. Usually like: cd /home/pi/cbpi4........ Do not generate a folder for the plugin as it is generated by the code.

Then execute the commands in the raspi command box:

cd /home/pi/cbpi4   			                    # subtitude /cbpi4 with your folder where you start cbpi. In this folder run the following commands
sudo cbpi create cbpi4-LCDisplay
sudo chown -R pi cbpi4-LCDisplay
sudo pip3 install -e ./cbpi4-LCDisplay
cbpi add cbpi4-LCDisplay
sudo rm -r cbpi4-LCDisplay/
sudo git clone https://github.com/JamFfm/cbpi4-LCDisplay

What does the Code? It installs a default plugin named cbpi4-LCDisplay. During installation several registrations are made. The folder cbpi4-LCDisplay is deleated and the new folder is generated by the clone process.

In the log when starting cbpi4 you hopefully will notice that LCD Display started without errors. Your user has to have permissions to write in the filesysten. This is usually the case when you use user pi.

A reboot is necessary.

There is another way to install like: sudo pip3 install https://github.com/JamFfm/cbpi4-LCDisplay/archive/main.zip

but this one installs in /usr/local/lib/python3.7/dist-packages/cbpi4-LCDisplay/* This is not handy if you need to have assess to the code. I do not recomend.

The installation via pip is work in progress!

Configuration

At least configure your i2c address in the settings menu. Have a look at this documentation.

There are different modes:

Default display

If no brewing process is running the LCD Display will show

• CraftBeerPi-Version
• Brewery-name
• Current IP adress
• Current date/time

Multidisplay mode

• The script will loop through your kettles and display the target and current temperature.
• If heater is on, a beerglas symbol will appear in the first row on the right side (not flashing).
• Use refresh parameter in settings to slow don or speed up the kettle changes.
• When target-temperature is reached it displays the remaining time of the step (rest) too.
• If the step name got the string "boil" in its name the remaining time to the next hop addition will be displayed. Otherwise the display of a boil type step looks the same as all the other steps.

Single mode

• Only displays one kettle but reacts a little bit faster on temperature changes.
• It displays the remaining time of the step (rest) when target temperature is reached.
• A small beerglas is flashing on/off in the first row on the right side to indicate that the heater is on.
• If the step name got the string "boil" in its name the remaining time to the next hop addition will be displayed. Otherwise the display of a boil type step looks the same as all the other steps.

Sensor mode

• Only displays the values and names of the sensortype.
• E.g. a iSpindel sensor can display temperature, gravity, battery etc. These values with corresponding sensorname is shown.
• The sensortype to be displayed is changed in settings section.
• If there is a missing sensor like from a future addon it can be added by typing in the code of function "set_sensortype_for_sensor_mode" in the init.py file.
• there is only OneWire and CustomSensor functioning (even some more are selectable)
• This is fixed in the future when ConfigType.SENSOR ist fixed by Manuel

Fermenter mode: not implemented

• Pretty much the same as multidisplay for all fermenter.
• Starts automatically if there is no Brewstep running and a active fermenterstep
• Displays the brew-name, fermenter-name, target-temperature, current-temperature of each fermenter.
• If the heater or cooler of the fermenter is on it will show a symbol. A beerglas detects heater is on, * means cooler in on.
• The remaining time for each fermenter is shown like in weeks, days, hours.
• Fermenter mode starts when a fermenter-step of any of the fermenter is starting and no brewing step is running(most likely)
• if there is a iSpindel sensor the Gravity is displayed at the corresponding fermenter.

Parameter

There are several parameter to change in the settings menu:

LCD_Address:
This is the address of the LCD module. You can detect it by using the following command in the commandbox of the Raspi:

• sudo i2cdetect -y 1 or
• sudo i2cdetect -y 0.

Default is 0x27.

LCD_Charactermap:
Changes value between A00 and A02. This is a character map build in by factory into the LCD. Most likely you get a LCD with A00 when you by it in China. A00 has got most of the European letters, and a lot of Asia letters. For germans the ÄÖÜß is missing in A00. In A02 there are more European letters incl. ÄÖÜß. Therefore, the addon distinguish between the charmaps. In case A00 it substitutes ÄÜÖß with custom made symbols which represent these letters. In case A02 the addon skips substitution. If you notice strange letters try to change this parameter. Default is "A00".

LCD_Display_Mode:
Changes between the 3 modes. Default is Multidisplay:

• Multidisplay
• Singledisplay
• Sensordisplay

LCD_Display_Sensortype:
Changes between sensortype (is like family of same sensors) which will be displayed in the sensormode (sensordisplay). Default is OneWire sensors. If there is more than one sensor of same sensor type the display toggles between the sensors

LCD_Refresh:
In Multidisplay and Sensor mode this is the time to wait until switching to next displayed kettle. Default is 3 sec.

LCD_Singledisplay:
Here you can change the kettle to be displayed in single mode.

Hints

• This is running in python3

• Changing a LCD_xxxx parameter in the parameters menu or any file in LCDDisplay folder usually requires a reboot.

• Whenever you need a reboot, have a look in the comments of the parameters.

• Future: A new fermenter should have a target temperature and at least one step defined.

• Future: Maybe it is necessary to restart craftbeerpi after adding a new fermenter.

• If the LCD address (e.g. 0x27) is right, but you still can not see letters displayed:

  • try to adjust contrast by the screw on the back of the LCD Hardware (I2C Module)
  • be sure to provide the LCD hardware with the right amount of voltage (mostly 5V or 3.3V)
  • use a strong power-supply. If you notice LCD fading, there is a lack of current.
  • use proper connections. Soldering the wires is best for connection. Bad connection can also result in fading the LCD.

Known Problems

The LCD hardware does not like temperature below 0°C (32°F). It becomes slow and can be damaged like brightness is no more homogenous throughout the hole LCD area. Fermenters are not implemented as they are not implemented in CBPI4 until now (5-2021)

Questions

Questions can be posed in the Craftbeerpi user group in Facebook or in the repository.

Fixed Issues

• has to be done