Skip to main content

Tools for calculating ocean C and B chemistry.

Project description


A Python module for calculating seawater carbon and boron chemistry.

This will be particularly useful for anyone thinking about oceans in the distant past, when Mg and Ca concentrations were different. I use Mathis Hain's MyAMI model to adjust speciation constants for Mg and Ca concentration.

Tested in the modern ocean against GLODAPv2 data (see below). Performs as well as Matlab CO2SYS.

Work in Progress:

If anyone wants to help with any of this, please do contribute! A full list of bite-sized tasks that need doing is available on the Issues page.


The development of cbsyst has been greatly aided by CO2SYS, and the Matlab conversion of CO2SYS. In particular, these programs represent a gargantuan effort to find the most appropriate coefficient formulations and parameterisations from typo-prone literature. CO2SYS has also provided an invaluable benchmark throughout development.

Data Comparison

I have used the GLODAPv2 data set to test how well cbsyst works with modern seawater.


Import the entire GLODAPv2 data set, remove all data where flag != 2 (2 = good data), and exclude all rows that don't have all of (salinity, temperature, pressure, tco2, talk, phosphate, silicate and phtsinsitutp) - i.e. salinity, temperature, pressure, nutrients and all three measured carbonate parameters. The resulting dataset contains 79,896 bottle samples. The code used to process the raw GLODAPv2 data is available here.

Next, calculate the carbonate system from sets of two of the measured carbonate parameters, and compare the calculated third parameter to the measured third parameter (i.e. calculate Alkalinity from pH and DIC, then compared calculated vs. measured Alkalinities). The code for making these comparison plots is here.


Calculated pH (from DIC and Alkalinity) is offset from measured values by -0.00061 (-0.029/+0.029). Calculated vs Measured pH

Calculated Alkalinity (from pH and DIC) is offset from measured values by 0.23 (-12/+11) umol/kg. Calculated vs Measured TA

Calculated DIC (from pH and Alkalinity) is offset from measured values by -0.22 (-11/+11) umol/kg. Calculated vs Measured DIC

Reported statistics are median ±95% confidence intervals extracted from the residuals (n = 79,896).

Data are idential to within rouding errors as values calculated by Matlab CO2SYS (v1.1).


cbsyst does a good job of fitting the GLODAPv2 dataset!

Technical Details


Constants calculated by an adaptation of Mathis Hain's MyAMI model. The original MyAMI code is available on GitHub. A stripped-down version of MyAMI is packaged with cbsyst. It has been modified to make it faster (by vectorising) and more 'Pythonic'. All the Matlab interface code has been removed.

Constants not provided by MyAMI (KP1, KP2, KP3, KSi, KF) are formulated following Dickson, Sabine & Christian's (2007) 'Guide to best practices for ocean CO2 measurements.'.

Pressure corrections are applied to the calculated constants following Eqns. 38-40 of Millero et al (2007), using (typo-corrected) constants in their Table 5. All constants are on the pH Total scale.


Speciation calculations follow Zeebe and Wolf-Gladrow (2001). Carbon speciation calculations are described in Appendix B, except where Alkalinity is involved, in which cases the formulations of Ernie Lewis' CO2SYS are used. Boron speciation calculations in Eqns. 3.4.43 - 3.4.46.

Boron isotopes are calculated in terms of fractional abundances instead of delta values, as outlines here. Delta values can be provided as an input, and are given as an output.


Requires Python 3.5+. Does not work in 2.7. Sorry.


pip install cbsyst


conda install cbsyst -c conda-forge

Example Usage

import cbsyst as cb
import numpy as np

# Create pH master variable for demo
pH = np.linspace(7,11,100)  # pH on Total scale

# Example Usage
# -------------
# The following functions can be used to calculate the
# speciation of C and B in seawater, and the isotope
# fractionation of B, given minimal input parameters.
# See the docstring for each function for info on
# required minimal parameters.

# Carbon system only
Csw = cb.Csys(pHtot=pH, DIC=2000.)

# Boron system only
Bsw = cb.Bsys(pHtot=pH, BT=433., dBT=39.5)

# Carbon and Boron systems
CBsw = cb.CBsys(pHtot=pH, DIC=2000., BT=433., dBT=39.5)

# At present, each function call can only be used to
# calculate a single minimal-parameter combination -
# i.e. you can't pass it multiple arrays of parameters
# with different combinations of parameters, as in
# the Matlab CO2SYS code.

# Example Output
# --------------
# The functions return a Bunch (modified dict with '.' 
# attribute access) containing all system parameters
# and constants.
# Output for a single input condition shown for clarity:

out = cb.CBsys(pHtot=8.1, DIC=2000., BT=433., dBT=39.5)

>>> {'ABO3': array([ 0.80882931]),
     'ABO4': array([ 0.80463763]),
     'ABT': array([ 0.80781778]),
     'BO3': array([ 328.50895695]),
     'BO4': array([ 104.49104305]),
     'BT': array([ 433.]),
     'CO2': array([ 9.7861814]),
     'CO3': array([ 238.511253]),
     'Ca': array([ 0.0102821]),
     'DIC': array([ 2000.]),
     'H': array([  7.94328235e-09]),
     'HCO3': array([ 1751.7025656]),
     'Ks': {'K0': array([ 0.02839188]),
      'K1': array([  1.42182814e-06]),
      'K2': array([  1.08155475e-09]),
      'KB': array([  2.52657299e-09]),
      'KS': array([ 0.10030207]),
      'KW': array([  6.06386369e-14]),
      'KspA': array([  6.48175907e-07]),
      'KspC': array([  4.27235093e-07])},
     'Mg': array([ 0.0528171]),
     'S': array([ 35.]),
     'T': array([ 25.]),
     'TA': array([ 2333.21612227]),
     'alphaB': array([ 1.02725]),
     'dBO3': array([ 46.30877684]),
     'dBO4': array([ 18.55320208]),
     'dBT': array([ 39.5]),
     'deltas': True,
     'fCO2': array([ 344.68238018]),
     'pCO2': array([ 345.78871573]),
     'pHtot': array([ 8.1]),
     'pdict': None}

# All of the calculated output arrays will be the same length as the longest
# input array.

# Access individual parameters by:

>>> array([ 238.511253])

# Output data for external use:
df = cb.data_out(out, 'example_export.csv')

# This returns a pandas.DataFrame object with all C and B parameters.
# It also saves the data to the specified file. The extension of the
# file determined the format it is saved in (see data_out docstring).

Technical Note: Whats is a Bunch?

For code readability and convenience, I've used Bunch objects instead of traditional dicts. A Bunch is a modification of a dict, which allows attribute access via the dot (.) operator. Apart from that, it works exactly like a normal dict (all the usual methods are available transparrently).


from cbsyst.helpers import Bunch

# Make a bunch
bun = Bunch({'a': 1,
             'b': 2})

# Access items of bunch...
# as a dict:

>>> 1

# as a Bunch:

>>> 1

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

cbsyst-0.4.9.tar.gz (9.0 MB view hashes)

Uploaded Source

Built Distribution

cbsyst-0.4.9-py3-none-any.whl (9.0 MB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page