cdk-fargate-patterns 0.3.101

CDK patterns for serverless container with AWS Fargate

cdk-fargate-patterns

CDK patterns for serverless container with AWS Fargate

DualAlbFargateService

Inspired by Vijay Menon from the AWS blog post introduced in 2019, DualAlbFargateService allows you to create one or many fargate services with both internet-facing ALB and internal ALB associated with all services. With this pattern, fargate services will be allowed to intercommunicat via internal ALB while external inbound traffic will be spread across the same service tasks through internet-facing ALB.

The sample below will create 3 fargate services associated with both external and internal ALBs. The internal ALB will have an alias(internal.svc.local) auto-configured from Route 53 so services can interconnect through the private ALB endpoint.

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "Service",
    spot=True,  # FARGATE_SPOT only cluster
    tasks=[{
        "task": order_task,
        "desired_count": 2,
        "external": {"port": 443, "certificate": certificate},
        "internal": {"port": 80},
        # customize the service autoscaling policy
        "scaling_policy": {
            "max_capacity": 20,
            "request_per_target": 1000,
            "target_cpu_utilization": 50
        }
    }, {"task": customer_task, "desired_count": 2, "internal": {"port": 8080}}, {"task": product_task, "desired_count": 2, "internal": {"port": 9090}}, {
        "task": task,
        "desired_count": 1,
        "internal": {"port": 50051, "certificate": [cert]},
        "external": {"port": 50051, "certificate": [cert]},
        "protocol_version": elbv2.ApplicationProtocolVersion.GRPC,
        "health_check": {
            "healthy_grpc_codes": "12"
        }
    }
    ],
    route53_ops={
        "zone_name": "svc.local",
        "external_elb_record_name": "external",
        "internal_elb_record_name": "internal"
    }
)

DualNlbFargateService

Similar to DualAlbFargateService, you are allowed to deploy multiple container services with AWS Fargate as well as external NLB and internal NLB.

To allowed ingress traffic, you will need to explicitly add ingress rules on the connections:

# Example automatically generated from non-compiling source. May contain errors.
nlb_service = DualNlbFargateService(stack, "NLBService",
    tasks=[...]
)

# we need this to allow ingress traffic from public internet only for the order service
nlb_service.service[0].connections.allow_from_any_ipv4(ec2.Port.tcp(8080))
# allow from VPC
nlb_service.service.for_each(s => {
      s.connections.allowFrom(ec2.Peer.ipv4(nlbService.vpc.vpcCidrBlock), ec2.Port.tcp(8080));
    })

ALB Listener Rules Support

To share the ALB listener with multiple services, use forwardConditions to specify custom rules.

The sample below defines three services sharing a single extneral listener on HTTPS(TCP 443) with different host names while interconnecting internally with different listeners on the internal ALB.

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "ALBService",
    spot=True,  # FARGATE_SPOT only cluster
    enable_execute_command=True,
    tasks=[{
        "task": order_task,
        "desired_count": 2,
        "internal": {"port": 80},
        "external": {
            "port": 443,
            "certificate": [cert],
            "forward_conditions": [elbv2.ListenerCondition.host_headers(["order.example.com"])]
        }
    }, {
        "task": customer_task,
        "desired_count": 1,
        "external": {
            "port": 443,
            "certificate": [cert],
            "forward_conditions": [elbv2.ListenerCondition.host_headers(["customer.example.com"])]
        },
        "internal": {"port": 8080}
    }, {
        "task": product_task,
        "desired_count": 1,
        "external": {
            "port": 443,
            "certificate": [cert],
            "forward_conditions": [elbv2.ListenerCondition.host_headers(["product.example.com"])]
        },
        "internal": {"port": 9090}
    }
    ]
)

Fargate Spot Support

By enabling the spot property, 100% fargate spot tasks will be provisioned to help you save up to 70%. Check more details about Fargate Spot. This is a handy catch-all flag to force all tasks to be FARGATE_SPOT only.

To specify mixed strategy with partial FARGATE and partial FARGATE_SPOT, specify the capacityProviderStrategy for individual tasks like.

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "Service",
    tasks=[{
        "task": customer_task,
        "internal": {"port": 8080},
        "desired_count": 2,
        "capacity_provider_strategy": [{
            "capacity_provider": "FARGATE",
            "base": 1,
            "weight": 1
        }, {
            "capacity_provider": "FARGATE_SPOT",
            "base": 0,
            "weight": 3
        }
        ]
    }
    ]
)

The custom capacity provider strategy will be applied if capacityProviderStretegy is specified, otherwise, 100% spot will be used when spot: true. The default policy is 100% Fargate on-demand.

Fargate Spot Termination Handling

By default, if fargate spot capacity is available in the cluster, a fargate spot termination handler Lambda function will be created with proper IAM role policies to handle the termination event to ensure we deregister the fargate spot task from target groups gracefully. While it's a recommended feature, you may opt out with spotTerminationHandler: false.

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "Service",
    spot=True,  # FARGATE_SPOT only cluster
    spot_termination_handler=False, ...
)

ECS Exec

Simply turn on the enableExecuteCommand property to enable the ECS Exec support for all services.

ECS deployment circuit breaker

ECS deployment circuit breaker automatically rolls back unhealthy service deployments without the need for manual intervention. By default this feature is enabled, you can opt out with circuitBreaker: false. Read the docummentation or blog post for more details.

Internal, External or Both

Specify the internal or external property to expose your service internally, externally or both.

The certificate property implies HTTPS protocol.

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "Service",
    tasks=[{"task": task1, "internal": {"port": 8080}}, {"task": task2, "external": {"port": 8081}}, {
        "task": task3,
        "external": {"port": 443, "certificate": my_acm_cert},
        "internal": {"port": 8888}
    }
    ]
)

VPC Subnets

By default, all tasks will be deployed in the private subnets. You will need the NAT gateway for the default route associated with the private subnets to ensure the task can successfully pull the container images.

However, you are allowed to specify vpcSubnets to customize the subnet selection.

To deploy all tasks in public subnets, one per AZ:

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "Service",
    vpc_subnets={
        "subnet_type": ec2.SubnetType.PUBLIC,
        "one_per_az": True
    }, ...
)

This will implicitly enable the auto assign public IP for each fargate task so the task can successfully pull the container images from external registry. However, the ingress traffic will still be balanced via the external ALB.

To deploy all tasks in specific subnets:

# Example automatically generated from non-compiling source. May contain errors.
DualAlbFargateService(stack, "Service",
    vpc_subnets={
        "subnets": [
            ec2.Subnet.from_subnet_id(stack, "sub-1a", "subnet-0e9460dbcfc4cf6ee"),
            ec2.Subnet.from_subnet_id(stack, "sub-1b", "subnet-0562f666bdf5c29af"),
            ec2.Subnet.from_subnet_id(stack, "sub-1c", "subnet-00ab15c0022872f06")
        ]
    }, ...
)

Import an existing Cluster

!!! Before using an existing ECS Cluster, please make sure you have the following:

• see : Adding Fargate capacity providers to an existing cluster

# Example automatically generated from non-compiling source. May contain errors.
vpc = ec2.Vpc.from_lookup(stack, "defVpc", is_default=True)
sg = ec2.SecurityGroup(stack, "demo-sg",
    vpc=vpc
)
exist_cluster = ecs.Cluster.from_cluster_attributes(stack, "existCluster",
    security_groups=[sg],
    cluster_name="existCluster",
    vpc=vpc
)

DualAlbFargateService(stack, "Service",
    enable_execute_command=True,
    cluster=exist_cluster,
    tasks=[{
        "task": nginx,
        "desired_count": 1,
        "external": {"port": 80},
        "capacity_provider_strategy": [{
            "capacity_provider": "FARGATE_SPOT",
            "weight": 1
        }]
    }
    ]
)

Sample Application

This repository comes with a sample applicaiton with 3 services in Golang. On deployment, the Order service will be exposed externally on external ALB port 80 and all requests to the Order service will trigger sub-requests internally to another other two services(product and customer) through the internal ALB and eventually aggregate the response back to the client.

Deploy

To deploy the sample application in you default VPC:

// install first
$ yarn install
// compile the ts to js
$ yarn build
$ npx cdk --app lib/integ.default.js -c use_default_vpc=1 diff
$ npx cdk --app lib/integ.default.js -c use_default_vpc=1 deploy

To deploy with HTTPS-only with existing ACM certificate in your default VPC:

$ npx cdk --app lib/integ.default.js deploy -c use_default_vpc=1 -c ACM_CERT_ARN=<YOUR_ACM_CERT_ARN>

On deployment complete, you will see the external ALB endpoint in the CDK output. cURL the external HTTP endpoint and you should be able to see the aggregated response.

$ curl http://demo-Servi-EH1OINYDWDU9-1397122594.ap-northeast-1.elb.amazonaws.com
or
$ curl https://<YOUR_CUSTOM_DOMAIN_NAME>

{"service":"order", "version":"1.0"}
{"service":"product","version":"1.0"}
{"service":"customer","version":"1.0"}

WordPress

Use the WordPress construct to create a serverless WordPress service with AWS Fargate, Amazon EFS filesystem and Aurora serverless database. All credentials auto generated from the AWS Secret Manager and securely inject the credentials into the serverless container with the auto generated IAM task execution role.

# Example automatically generated from non-compiling source. May contain errors.
WordPress(stack, "WP",
    aurora_serverless=True,
    spot=True,
    enable_execute_command=True
)

Laravel

The Laravl construct is provided as a high-level abstraction that allows you to create a modern Laravel environment running on AWS Fargate and Amazon Aurora Serverless. Here comes two variants as the reference:

laravel-bitnami - based on bitnami/laravel with artisan running as the built-in web server.

laravel-nginx-php-fpm - laravel with nginx and php-fpm maintained by Ernest Chiang.

Simply point code to your local Laravel codebase and it takes care everything else for you.

Samples

# Example automatically generated from non-compiling source. May contain errors.
#
# laravel-bitnami
#
Laravel(stack, "LaravelBitnamiDemo",
    aurora_serverless=True,
    spot=True,
    enable_execute_command=True,
    code=path.join(__dirname, "../services/laravel-bitnami"),
    container_port=3000,
    loadbalancer={"port": 80}
)

#
# laravel-nginx-php-fpm
#
Laravel(stack, "LaravelNginxDemo",
    aurora_serverless=True,
    spot=True,
    enable_execute_command=True,
    code=path.join(__dirname, "../services/laravel-nginx-php-fpm"),
    loadbalancer={"port": 80}
)

See integ.laravel.ts for the full code sample.

Local development and testing

The docker-compose.yml is provided with all sample services in the repository. To bring up all services locally, run:

$ cd services
$ docker compose up

Use cURL to test locally:

curl http://localhost

Response:

{"service":"order","version":"1.0"}
{"service":"product","version":"1.0"}
{"service":"customer","version":"1.0"}

FAQ

Q: What is the difference between cdk-fargate-patterns and aws-ecs-patterns?

A: aws-ecs-patterns comes with a few patterns around Amazon ECS with AWS Fargate or AWS EC2 and focuses on some scenarios with single service and single ELB like ApplicationLoadBalancedFargateService and NetworkLoadBalancedFargateService. However, cdk-fargate-patterns is trying to explore use cases on modern application which usually comes with multiple container services grouped as a deployment with inter-service connectivity as well as ingress traffic from external internet by seperating the internal ELB from the external one.

Contributors ✨

Thanks goes to these wonderful people (emoji key):

Neil Kuan 🎨 💻 ⚠️ 💡

Ernest Chiang 🤔 ⚠️ 💻 💡

Clarence 💡 💻

paper5487 🐛

Peter Larsson 🤔

LeoChien-SC 🐛

This project follows the all-contributors specification. Contributions of any kind welcome!