cheap-pie 1.1.0

A python tool for silicon validation.

cheap_pie

A python tool for register-based chip verification and validation

"Cheap Pie" is a python tool for register-based chip verification and validation. The name is a translitteration of "chip py" for obvious reasons.

Given an input description file for the chip, it provides a register-level and bitfield-level read/write access, through a generic transport layer.

Currently the implemented description input modes are:

• CMSIS-SVD (https://www.keil.com/pack/doc/CMSIS/SVD/html/svd_Format_pg.html)
• IP-XACT ( https://www.accellera.org/downloads/standards/ip-xact )
• SystemRDL (https://www.accellera.org/activities/working-groups/systemrdl)

but it should be relatively easy to add different chip description formats.

Although tested on few real chips (NXP QN9080, I.MX RT1010, K64F), cheap_pie parser already supports dozen of devices, listed in the CMSIS-SVD repository https://github.com/posborne/cmsis-svd .

Currently the supported transport layers are jlink and pyocd, but it should be really easy to add support for different transport layers, like for instance openSDA, CMSIS-DAP, Total Phase Cheetah, GDB or any other.

Experimental support for pyverilator transport allows to run interactive simulation of register blocks generated from SystemRDL source.

Author: Marco Merlin Tested on ipython3 (python 3.8.5) on ubuntu 20.04

IPython Example:

    %run cheap_pie
    inval = "0xFFFFFFFF"
    hal.regs.ADC_ANA_CTRL.setreg(inval)
    retval = hex(hal.regs.ADC_ANA_CTRL.getreg())
    assert(literal_eval(inval) == literal_eval(retval))

    # decimal assignement        
    inval = 2
    hal.regs.ADC_ANA_CTRL.setreg(inval)
    retval = hal.regs.ADC_ANA_CTRL.getreg()        
    assert(inval == retval)
    
    hal.regs.ADC_ANA_CTRL
    hal.regs.ADC_ANA_CTRL.display()
            
    print('Test bitfield methods...')
    
    hal.regs.ADC_ANA_CTRL.bitfields.ADC_BM
    hal.regs.ADC_ANA_CTRL.bitfields.ADC_BM.display()
    hal.regs.ADC_ANA_CTRL.bitfields.ADC_BM.display(2)
    hal.regs.ADC_ANA_CTRL.bitfields.ADC_BM.setbit(inval)
    retval = hal.regs.ADC_ANA_CTRL.bitfields.ADC_BM.getbit()
    assert(inval == retval)

    # subscriptable register access
    hal[0]
    # subscriptable bitfield access
    hal[0][0]
    # subscriptable as a dictionary
    hal['SYSCON_RST_SW_SET']
    hal['ADC_ANA_CTRL']['ADC_BM']
    
    # assignement
    hal['ADC_ANA_CTRL'] = 1
    hal['ADC_ANA_CTRL']['ADC_BM'] = 2
    # dict-based assignement in single register write
    hal['ADC_ANA_CTRL'] = {'DITHER_EN': 1, 'CHOP_EN': 1, 'INV_CLK': 1}

    # help
    hal.regs.ADC_ANA_CTRL.help()
    ADC core and reference setting regsiter
               ADC_BM: 
                     : ADC bias current selection.
            ADC_ORDER: 
                     : 1 to enable SD ADC 2 order mode selection
            DITHER_EN: 
                     : 1 to enable SD ADC PN Sequence in chopper mode
              CHOP_EN: 
                     : 1 to enable SD ADC chopper
              INV_CLK: 
                     : 1 to invert SD ADC Output Clock
              VREF_BM: 
                     : SD ADC Reference Driver bias current selection.
           VREF_BM_X3: 
                     : SD ADC Reference Driver bias current triple.
           VINN_IN_BM: 
                     : PGA VlNN Input Driver bias current selection.
          VINN_OUT_BM: 
                     : PGA VlNN Output Driver bias current selection.
       VINN_OUT_BM_X3: 
                     : PGA VlNN Output Driver bias current triple.
          ADC_BM_DIV2: 
                     : SD ADC bias current half.

CLI Example:

    # load RT1010 from local svd file under ./devices/
    # automatically calls ipython and cheap_pie initialization
    ./cheap_pie.sh -rf MIMXRT1011.svd -t jlink

    # load K64 from CMSIS-SVD
    # need to specify vendor for svd not in ./devices/
    ./cheap_pie.sh -rf MK64F12.svd -ve Freescale -t jlink

    # calls QN9080 with dummy transport layer 
    # useful to explore device registers
    ./cheap_pie.sh -t dummy

Default configurations Examples:

    # calls QN9080 device with dummy transport layer
    ./cfgs/cp_qn9080_dummy.sh
    # calls RT1010 device with jlink transport layer
    ./cfgs/cp_rt1010_jlink.sh
    # calls K20 device with dummy transport layer
    ./cfgs/cp_k20_dummy.sh

Verilator interactive simulation Examples:

    ./tools/rdl2verilog.py -f ./devices/rdl/basic.rdl
    ./cheap_pie.sh -dd  ./devices/rdl -rf basic.rdl -fmt rdl -t verilator -topv ./devices/rdl/basic/basic_rf.sv

Install

From pypi

    pip3 install cheap_pie

From github

    pip3 install git+https://github.com/bat52/cheap_pie.git@master

Dependencies for core (required):

    # for XML parsing (used by legacy svd parser and IP-XACT parser)
    pip3 install untangle
    # for exporting XML info into a human-readable document
    pip3 install python-docx
    # for dumping registers
    pip3 install hickle
    # CMSIS-SVD python parser including many svd files https://github.com/posborne/cmsis-svd
    pip3 install cmsis-svd
    # SPIRIT IP-XACT parser through ipyxact https://github.com/olofk/ipyxact
    pip3 install ipyxact                
    # SystemRDL to register-file verilog
    https://github.com/hughjackson/PeakRDL-verilog
    # SystemRDL to IP-XACT
    https://github.com/SystemRDL/PeakRDL-ipxact

Dependencies for validation/transport layers (optional):

    # for JLINK
    pip3 install pylink-square
    # pyOCD for CMSIS-DAP and JLINK support (only tested in python-venv)
    pip3 install pyocd
    # esptool for Espressif devices (not yet functional)
    pip3 install esptool        

Dependencies for verification (optional AND experimental):

    # verilator
    https://www.veripool.org/verilator/
    # pyverilator (python verilator wrapper)
    https://github.com/csail-csg/pyverilator        
    # gtkwave
    http://gtkwave.sourceforge.net/

Register description formats

regtool from opentitan project seems similar, using JSON to represent chip/IP structure, and I2C transport https://docs.opentitan.org/doc/rm/register_tool/

custom input, output: verilog, VHDL, YAML, JSON, TOML, Spreadsheet (XLSX, XLS, OSD, CSV) https://github.com/rggen/rggen

convert ipxact register file description into verilog register bank https://github.com/oddball/ipxact2systemverilog

Others

In conjunction with pyVISA (https://pyvisa.readthedocs.io/en/master/), used for instument control, it provides a simple and fully python-contained environment for silicon validation.

Graphical Render of bitfield structures https://github.com/wavedrom/bitfield

C++ register/bitfields access (including generation from svd) https://github.com/thanks4opensource/regbits

STM C++ regbits implementation https://github.com/thanks4opensource/regbits_stm

a barebone embedded library generator https://modm.io/

hardware descriptions for AVR and STM32 devices https://github.com/modm-io/modm-devices

STM32 Peripheral Access Crates (from svd) https://github.com/stm32-rs/stm32-rs

Banner created with pyfiglet https://www.devdungeon.com/content/create-ascii-art-text-banners-python#install_pyfiglet

Cheap Pie is modeled after an original Octave/Matlab implementation that cannot be shared due to licensing reasons. The original code was converted to python using SMOP ( https://github.com/ripple-neuro/smop ).