cisco-config-parser 1.2.0

This Package Will Parse Cisco IOS, IOS-XE and IOS-XR Configuration File.

Cisco Configuration Parser

This Package Will Parse Cisco IOS, IOS-XE and IOS-XR Configuration File.

There are two ways to parse the config, 1, SSH which is not recommended, and 2, feeding the running-config file

• to use file, use ConfigParser(file=your_file).
• to use SSH:

ConfigParser(
    ssh=True, 
    user="username", 
    password="password", 
    device_type="cisco_ios", 
    host="your_switch_ip"
    )

device types that are accepted are:

cisco_ios
cisco_xe
cisco_xr

pass the kwargs then it will login to your device and does the show running-config and will parse it.

Install the package

https://pypi.org/project/cisco-config-parser/

pip install cisco-config-parser

if you wish to use the SSH feature, please install netmiko as well

pip install netmiko

Regex Search Strings:

• to find lines in the configuration starting with "router"

parse.find_parent_child("^router")

• to parse all confuguration into parent and child format

parse.find_parent_child("^.")

• to find lines in the configuration that has "Loopback" in them

parse.find_parent_child("^.*Loopback")

Examples:

• Getting Routed Ports

from cisco_config_parser import ConfigParser

file = "running-config.txt"

parser = ConfigParser(file=file)

obj = parser.get_routed_port()

for i in obj:
    print(i.intf)
    print(i.ip_add, i.mask)
    print(i.subnet)
    print(i.description)
    print(i.vrf)
    print(i.description)
    print(i.state)
    print("!")

output:

interface TenGigE0/3/0/29.3240
10.10.1.1 255.255.255.248
10.10.1.0/29
 description Connected to device_A
 vrf vrf_A
 no shutdown
!
interface TenGigE0/3/0/29.3340
10.244.10.1 255.255.255.252
10.244.10.0/30
 description Connected to device_A
 vrf vrf_B
 no shutdown

• Getting Switchport:

from cisco_config_parser import ConfigParser

file = "stnnwk-21-sa01_run_config.txt"

parser = ConfigParser(file=file)

obj = parser.get_switchport()

for i in obj:
    print(i.port)
    print(i.mode)
    print(i.vlan)
    print(i.voice)
    print(i.description)
    print("!")

output:

  
interface GigabitEthernet10/38
Access Port
Vlan  200
Voice  vlan 700
 description ent-user
!
interface GigabitEthernet10/38
Access Port
Vlan  200
Voice  vlan 700
 description ent-user

• Finding Routing Protocol

    from cisco_config_parser import ConfigParser
    
    
    my_file = "switch01_running_config.txt"
    parse = ConfigParser(file=my_file)
    
    
    obj_list = parse.find_parent_child("^router")
    for i in obj_list:
        print(i.parent)
        for child_obj in i.child:
            print(child_obj)
 

Output:

router eigrp 252
!
address-family ipv4 vrf vrf_A autonomous-system 252
 network 10.10.10.0 0.0.0.63
 passive-interface default
 no passive-interface Vlan3123
 no passive-interface Vlan3124
 eigrp stub connected summary
exit-address-family
!
address-family ipv4 vrf vrf_B autonomous-system 252
 network 10.20.10.0 0.0.0.3
 network 10.20.11.0 0.0.0.3
 passive-interface default
 no passive-interface Vlan3223
 no passive-interface Vlan3224
 eigrp stub connected summary
exit-address-family
!

• Finding Interface and Helper address Example

    from cisco_config_parser import ConfigParser


    my_file = "switch01_running_config.txt"
    parse = ConfigParser(file=my_file)
    obj_list = parse.find_parent_child("^interface")

    for i in obj_list:
        vlan_200 = re.search("Vlan200", i.parent)
        if vlan_200:
            print(i.parent)
            for c_obj in i.child:
                if str(c_obj).startswith(" ip helper"):
                    print(str(c_obj))

Output:

interface Vlan200
 ip helper-address 192.168.1.10
 ip helper-address 172.31.10.10

• Finding SVI in the config with all its child configuration

from cisco_config_parser import ConfigParser



file = "switch_01-run_config.txt"
parser = ConfigParser(file=file)

res = parser.get_svi_objects()

for i in res:
    if "lan200" in i.intf:
        print(i.intf)
        print(i.ip_add)
        print(i.description)
        print(i.vrf)
        print(i.state)
        print(i.helper)
        print("!")

output:

interface Vlan200
 ip address 10.20.80.1 255.255.254.0
 description USER VLAN-
 ip vrf forwarding vrf_A
 no shutdown
[' ip helper-address 10.10.1.10 ', ' ip helper-address 10.20.1.10']
!