cisco-config-parser 2.2.5

This library is used for Network Automation involving Cisco Routers and Switch. It will parse Cisco IOS, IOS-XE, IOS-XR, and NXOS configuration file into objects and/or json format

Cisco Configuration Parser

Overview

The Cisco Configuration Parser is a Python library designed for network automation tasks, specifically focusing on parsing configuration files from Cisco routers and switches. It supports Cisco IOS, IOS-XE, IOS-XR, and NXOS platforms. This library allows you to convert running configuration files into structured Python objects or JSON/dictionary formats for easier analysis, modification, or automation.

Key Features

Platform Detection

This library is designed to be platform agnostic, meaning it can automatically determine the Cisco platform based on the syntax of the configuration file. In cases where the platform cannot be determined automatically, you can manually specify the platform by passing platform="IOS/XR/NXOS" to the parser.

Flexible Data Handling

The parser can convert configuration data into either Python objects or JSON/dictionary formats. You can control the format by passing the return_json=True flag to the relevant method. This flexibility allows you to integrate with a wide range of automation workflows and tools.

Configuration Hierarchy Recognition

Cisco configurations often feature a mix of parent-child relationships and standalone entries. This library is adept at recognizing and parsing these patterns to capture both common and critical configuration attributes. For instance:

• Standalone Configuration Example:

hostname switch01.net

• Parent-Child Configuration Example:

Vlan 100                <<<< Parent
  name DATA_VLAN        <<<< Child

This library tries to captures the important and common attributes of the configurations for different sections and convert them to python objects or json/dict format.

Some of those configs are as follow:

- Hostname,
- AAA, 
- Interface,
- VLAN, 
- Interface (Layer2 and Layer3),
- Access-list, 
- Prefix-list, 
- Prefix-set (IOS-XR)
- Route-map, 
- Route-policy (IOS-XR),
- Static Routes,
- Dynamic Routes
    - RIP
    - EIGRP
    - OSPF
    - IS-IS
    - BGP

- Line-vty 
- Line-con
- Banner

Above configuration sections are captured along with the most common attributes/children. and the rest of them are captured inside method obj.children.

Parent/Child Regex Parsing Capabilities

In addition to above default behavior or the library, you also have the option to pass your own regex to the ConfigParser as either parent_regex=r"<custom_regex>", child_regex=r"<custom_regex>" or only parent_regex=r"<custom_regex>".

Note: If you pass both parent_regex and child_regex, the library attempt to search for the parent and the only child that you have searched for. If you would like to get all the children, then just pass the parent_regex to the class. I will have some example at the bottom this document.

Install the package

This package is available on pypi.org you can install the package via pip.

https://pypi.org/project/cisco-config-parser/

pip install cisco-config-parser

Current Classes in this library

IOSStaticRouteConfig
IOSOSPFConfig
IOSEIGRPConfig
IOSBGPConfig
IOSBGPConfig
L3InterfaceParser
L2InterfaceParser
ParentChildParser

There more Classes are being built, and will be released in the upcoming versions.

Get Example usage:

A short documentation is embeded in the code base. you can view those example by importing helper and calling the class

from cisco_config_parser.helper import helper 

helper = helper.IOSStaticRouteConfig()

print(helper)

Output:

Example Usage:
====================================================================================================

with open("show_run.txt", "r") as file_output:
    content = file_output.read()


obj = ConfigParser(content)

obj.get_static_routes() << Returns a list of objects
obj.get_static_routes(return_json=True) << Returns a list of dictionaries 

Examples:

Loading the Running-Config File

>>> ios_file = "/Users/fileFolder/devFolder/config.txt"
>>> with open(ios_file, "r") as f:
        running_config = f.read()

>>> from cisco_config_parser import ConfigParser
>>> 
>>> parser = ConfigParser(running_config)

Layer3 Interface

In layer-3 interface, the class attempts to capture all the important attributes of the interface, such as:

• IPv4 Address
• Subnet
• Subnet Mask
• Secondary IPv4 Address
• Secondary Subnet
• Secondary Subnet Mask
• HSRP or VRRP Config
  • VIP

Subnet list and their Usages

One of the great feature in this library is it captures all the subnets that are being used in your Network Device along with their usage. Also it tells you how many of each subnet masks are being used as well. I personaly use this feature when i need to automate DHCP/IPAM documentaion cleanup.

Example below illustriates this feature:

>>> subnet_usage = parser.get_subnet_and_usage(include_subnet_count=True)
>>> print(json.dumps(subnet_usage, indent=4))

{
    "Loopback100": "10.241.17.8/32",
    "Loopback200": "10.252.248.1/32",
    "Vlan200": "10.252.182.0/23",
    "Vlan300": "10.244.16.160/27",
    "Vlan310": "10.241.101.80/28",
    "Vlan400": "10.39.10.32/27",
    "Vlan700": "172.31.81.0/25",
    "Vlan1100": "10.242.12.0/26",
    "Vlan1125": "10.241.8.0/27",
    "Vlan1126": "10.241.8.32/27",
    "Vlan1127": "10.241.8.64/27",
    "subnet_count": {
        "/32": 2,
        "/23": 1,
        "/27": 5,
        "/28": 1,
        "/25": 1,
        "/26": 1,
    }
}

Layer3 Interfaces - List of Objects

>>> l3_interfaces = parser.get_l3_interfaces()
>>>for l3 in l3_interfaces:
        print(l3.name)
        print(l3.ip_address, l3.subnet)
        print("!")

Loopback100
10.241.17.8 10.241.17.8/32
!
Loopback200
10.252.248.1 10.252.248.1/32
!
Loopback202
10.245.0.199 10.245.0.199/32

Layer3 Interfaces - Json/Dict Format

>>> l3_interfaces = parser.get_l3_interfaces(return_json=True)
>>> print(json.dumps(l3_interfaces, indent=4))
[
    {
        "name": "Loopback100",
        "description": "SWITCH01-SA01 Loopback IP",
        "ip_address": "10.241.17.8",
        "mask": "255.255.255.255",
        "subnet": "10.241.17.8/32",
        "helpers": null,
        "sec_ip_address": null,
        "sec_mask": null,
        "sec_subnet": null,
        "vrf": "mgt100",
        "state": null,
        "vip": null,
        "children": [
            "description SWITCH01-SA01 Loopback IP",
            "ip vrf forwarding mgt100",
            "ip address 10.241.17.8 255.255.255.255",
            "ip pim sparse-mode",
            "ip ospf 100 area 0"
        ]
    },
]

Layer3 Interfaces - Custom Key/Value and Regex

>>> l3_interfaces = parser.get_l3_interfaces(ip_pim="ip pim.*")
>>> for i in l3_interfaces:
        print(i.name)
        print(i.ip_pim)
        print("!")

Loopback100
ip pim sparse-mode
!
Loopback200
ip pim sparse-mode
!

Layer2 Access and Trunk Interface

Access Port List of Objects

>>> access_ports = parser.get_l2_access_interfaces()
>>> 
>>> for intf in access_ports:
    print(intf.name)
    print(intf.description)
    print(intf.children)
    print("!")
... 
GigabitEthernet1/1
Data Users
['description Data Users', 'switchport access vlan 200', 'switchport mode access', 'switchport voice vlan 700', 'no logging event power-inline-status', 'ip dhcp snooping information option allow-untrusted']
!
GigabitEthernet1/2
Data Users
['description Data Users', 'switchport access vlan 200', 'switchport mode access', 'switchport voice vlan 700', 'no logging event power-inline-status', 'ip dhcp snooping information option allow-untrusted']
!

Access Port the json/dict format:

>>> access_ports = parser.get_l2_access_interfaces(return_json=True)

>>> print(json.dumps(access_ports, indent=4))

[
    {
        "name": "GigabitEthernet1/1",
        "description": "DATA Users",
        "data_vlan": "200",
        "voice_vlan": "700",
        "state": null,
        "spanning_tree": null,
        "native_vlan": null,
        "children": [
            "description DATA Users",
            "switchport access vlan 200",
            "switchport mode access",
            "switchport voice vlan 700",
            "no logging event power-inline-status",
            "ip dhcp snooping information option allow-untrusted"
        ]
    },
]

Access Port Custom Key/method search

You can use your own custom regex with your own key, this key then become a dynamic method of the class where you can either call it or recieve it as json format.

>>> access_ports = parser.get_l2_access_interfaces(logging="no loggin.*", return_json=True)

>>> print(json.dumps(access_ports, indent=4))

[
    {
        "name": "GigabitEthernet1/1",
        "description": "SHC-Users",
        "data_vlan": "200",
        "voice_vlan": "700",
        "state": null,
        "spanning_tree": null,
        "native_vlan": null,
        "children": [
            "description SHC-Users",
            "switchport access vlan 200",
            "switchport mode access",
            "switchport voice vlan 700",
            "no logging event power-inline-status",
            "ip dhcp snooping information option allow-untrusted"
        ],
        "logging": "no logging event power-inline-status"                       <<<<< custom Key to find logging command
    },
]

Trunk Port List of Objects

>>> trunk_interfaces = parser.get_l2_trunk_interfaces()

>>> for intf in trunk_interfaces:
        print(intf.name)
        print(intf.description)
        print("!")

TenGigabitEthernet5/1
(MP)SWITCH-SD03:Twe1/0/6
!
TenGigabitEthernet5/2
Link to SWITCH-SA01 Te6/2 Decomm
!
TenGigabitEthernet6/1
(MP)SWITCH-SD04:Te1/1
!

Trunk Port Json/Dict format

>>> trunk_interfaces = parser.get_l2_trunk_interfaces(return_json=True)
>>> print(json.dumps(trunk_interfaces, indent=4))

[
    {
        "name": "TenGigabitEthernet5/1",
        "description": "(MP)SWITCH-SD03:Twe1/0/6",
        "allowed_vlans": null,
        "dhcp_snooping": null,
        "dhcp_relay": null,
        "voice_vlan": null,
        "state": null,
        "spanning_tree": null,
        "native_vlan": "256",
        "children": [
            "description (MP)SWITCH-SD03:Twe1/0/6",
            "switchport trunk native vlan 256",
            "switchport trunk allowed vlan 182,256,504,1100,3101,3201,3301,3311,3321,3331",
            "switchport trunk allowed vlan add 3351,3401,3411,3911",
            "switchport mode trunk",
            "load-interval 30",
            "udld port aggressive",
            "service-policy output egress_queueing",
            "ip dhcp snooping trust"
        ],
        "allowed_vlan": "182,256,504,1100,3101,3201,3301,3311,3321,3331"
    },
]

Trunk Port Custom Key/method search

>>> access_ports = parser.parser.get_l2_trunk_interfaces(load="load.*", return_json=True)

>>> print(json.dumps(access_ports, indent=4))

    {
        "name": "TenGigabitEthernet5/1",
        "description": "(MP)SWITCH-SD03:Twe1/0/6",
        "allowed_vlans": null,
        "dhcp_snooping": null,
        "dhcp_relay": null,
        "voice_vlan": null,
        "state": null,
        "spanning_tree": null,
        "native_vlan": "256",
        "children": [
            "description (MP)STNMED-LPCH-SD03:Twe1/0/6",
            "switchport trunk native vlan 256",
            "switchport trunk allowed vlan 182,256,504,1100,3101,3201,3301,3311,3321,3331",
            "switchport trunk allowed vlan add 3351,3401,3411,3911",
            "switchport mode trunk",
            "load-interval 30",
            "udld port aggressive",
            "service-policy output egress_queueing",
            "ip dhcp snooping trust"
        ],
        "allowed_vlan": "182,256,504,1100,3101,3201,3301,3311,3321,3331",
        "load": "load-interval 30"                                      <<<<< Custom Key and Value
    },

Static Route Config

Features

• Parse Static Routes: Extract and parse static routing commands (ip route entries) from Cisco running configurations.
• Convert to Python Objects: Represent these routes as structured Python objects, enabling programmatic manipulation and easy integration with Python-based tools.
• Export to JSON/Dict: Convert static routing information into JSON or dictionary format, making it straightforward to use in web applications, APIs, or data storage solutions.

Example

Python Object:

>>> static = parser.get_static_config()
>>> for i in static:
        print(i.subnet, i.name, i.nexthop_ip)

0.0.0.0/0 MC-RS01 10.240.129.3
0.0.0.0/0 NC-RS01 10.240.129.11
10.243.98.32/28 P2P_Subnet 10.243.99.186

Json/Dict:

static = parser.get_static_config()
[
    {
        "network": "0.0.0.0",
        "mask": "0.0.0.0",
        "nexthop_ip": "10.240.129.3",
        "subnet": "0.0.0.0/0",
        "vrf": "default",
        "name": "MC-RS01",
        "admin_distance": null
    },
]

Dynamic Route Config

EIGRP

eigrp_configs = parser.get_eigrp_config(return_json=True)

[
    {
        "as_number": 300,
        "network": [
            {
                "network": "10.242.96.240",
                "subnet_mask": "255.255.255.252",
                "wildcard_mask": "0.0.0.3"
            },
            {
                "network": "10.242.97.244",
                "subnet_mask": "255.255.255.252",
                "wildcard_mask": "0.0.0.3"
            },
            {
                "network": "10.242.98.248",
                "subnet_mask": "255.255.255.252",
                "wildcard_mask": "0.0.0.3"
            },
            {
                "network": "10.242.99.252",
                "subnet_mask": "255.255.255.252",
                "wildcard_mask": "0.0.0.3"
            }
        ],
        "vrf": "Global",
        "wild_card_mask": null,
        "subnet": null,
        "has_vrf": true,
        "vrf_count": 8,
        "passive_interface": null,
        "no_passive_interface": null,
        "auto_cost": null,
        "interfaces": null,
        "children": [
            "network 10.242.96.240 0.0.0.3",
            "network 10.242.97.244 0.0.0.3",
            "network 10.242.98.248 0.0.0.3",
            "network 10.242.99.252 0.0.0.3",
            "no passive-interface GigabitEthernet1/9",
            "no passive-interface GigabitEthernet1/10",
            "passive-interface default",
            "no auto-summary"
        ],
        "vrf_children": [
            {
                "vrf": "mgt100",
                "network": [
                    {
                        "network": "10.242.96.240",
                        "subnet_mask": "255.255.255.252",
                        "wildcard_mask": "0.0.0.3"
                    }
                ],
                "wild_card_mask": null,
                "subnet": null,
                "passive_interface": null,
                "no_passive_interface": null,
                "auto_cost": null,
                "interfaces": null,
                "children": [
                    "redistribute bgp 65240 metric 1000 100 255 1 1500 route-map MGT100_EIGRP_REDIST_BGP",
                    "network 10.242.96.240 0.0.0.3",
                    "passive-interface default",
                    "no passive-interface TenGigabitEthernet1/9.3131",
                    "distribute-list route-map route_map_inbound in",
                    "autonomous-system 300",
                    "exit-address-family"
                ]
            },
        ]
    }
    
]

BGP Route Config:

Example: bgp_configs = parser.get_bgp_config(return_json=True)

[
    {
        "router_id": "10.240.129.45",
        "vrf_list": [
            "blu300",
        ],
        "vrf": "Global",
        "network": [
            "10.245.49.132/32"
        ],
        "peer_group": [
            {
                "peer_group": {
                    "name": "RR",
                    "remote_as": "65234",
                    "update_source": "Loopback1",
                    "route_map": {
                        "in": "PEER_GROUP_RR_INBOUND",
                        "out": "PEER_GROUP_RR_OUTBOUND"
                    },
                    "neighbors": [
                        {
                            "ip": "10.252.248.251",
                            "description": "RR-Router-01"
                        },
                    ]
                }
            },
        ],
        "neighbors": null,
        "redistribute": [
            {
                "vrf": "Global",
                "protocol": "eigrp 100",
                "route_map": ""
            }
        ],
        "vrf_children": [
            {
                "vrf": "blu300",
                "network": [
                    "10.245.17.132/32"
                ],
                "peer_group": null,
                "neighbors": [
                    {
                        "vrf": "blu300",
                        "ip": "10.245.20.30",
                        "remote_as": "65245",
                        "description": "REMOTE_ROUTER-SA01_BLU300",
                        "update_source": "TenGigabitEthernet10/14.3301",
                        "route_map": {
                            "in": "ALLVRF_BGP_RM_INBOUND",
                            "out": "ALLVRF_BGP_RM_OUTBOUND"
                        }
                    }
                ],
                "redistribute": [
                    {
                        "vrf": "blu300",
                        "protocol": "eigrp 252",
                        "route_map": " BLU300_BGP_REDIST_EIGRP"
                    },
                    {
                        "vrf": "blu300",
                        "protocol": "static",
                        "route_map": " BLU300_BGP_REDIST_STATIC"
                    }
                ],
            }
        ]
    }
]

OSPF Route Config

In ospf, ConfigParser attemps to capture any interfaces that are participating in OSPF as well.

Example:

ospf = parser.get_ospf_config(return_json=True)

[
    {
        "process_id": "240",
        "router_id": "10.240.129.45",
        "network": [
            {
                "network": "10.3.3.0",
                "subnet_mask": "255.255.255.0",
                "wildcard_mask": "0.0.0.255",
                "area": "0"
            }
        ],
        "wild_card_mask": null,
        "subnet": null,
        "vrf": null,
        "passive_interface": [
            {
                "interface": "default"
            }
        ],
        "no_passive_interface": [
            {
                "interface": "GigabitEthernet1/0"
            }
        ],
        "auto_cost": "10000",
        "interfaces": [
            {
                "interface": "Loopback0",
                "area": "0",
                "process_id": "240"
            }
        ]
    }
]

Custom Parsing

Example: custom_search = parser.get_parent_child(parent_regex="aaa.*", child_regex="server.*", return_json=True)

[
    {
        "parent": "aaa group server tacacs+ ISE_TACACS",
        "children": "server tacacs+ ISE_TACACS"
    }
]

Future Enhancements

I am actively working on expanding the capabilities of this library. Upcoming features include:

• Enhanced support for NXOS: Additional parsing for NXOS-specific configurations and features.
• Full support for IOS-XR: Expanding coverage for IOS-XR configurations to include more advanced routing and service configurations.
• More configuration sections: Additional Cisco configuration types and attributes will be parsed in future releases.

Stay tuned for these updates and more in future versions of the library!

Contribution

Contributions are welcome! To contribute:

1. Fork this repository.
2. Create a feature branch.
3. Make your changes and add tests if applicable.
4. Submit a pull request for review.
5. Feel free to open an issue for any bug reports or feature requests.

License

This project is licensed under the MIT License.

Key Improvements:

1. Title and Overview: I emphasized the functionality of the library with clear mention of automation, parsing, and supported platforms.
2. Key Features: I made the features section clearer and more structured.
3. Usage Example: Added a usage example to make it easy for users to get started.
4. Installation: Provided simple installation instructions using pip.
5. Contribution and License Sections: These are standard in open-source projects and help potential contributors know how to get involved.