cocotbext-axi 0.1.4

AXI, AXI lite, and AXI stream modules for cocotb

AXI interface modules for Cocotb

GitHub repository: https://github.com/alexforencich/cocotbext-axi

Introduction

AXI, AXI lite, and AXI stream simulation models for cocotb.

Installation

Installation from pip (release version, stable):

$ pip install cocotbext-axi

Installation from git (latest development version, potentially unstable):

$ pip install https://github.com/alexforencich/cocotbext-axi/archive/master.zip

Installation for active development:

$ git clone https://github.com/alexforencich/cocotbext-axi
$ pip install -e cocotbext-axi

Documentation and usage examples

See the tests directory, verilog-axi, and verilog-axis for complete testbenches using these modules.

AXI and AXI lite master

The AxiMaster and AxiLiteMaster classes implement AXI masters and are capable of generating read and write operations against AXI slaves. Requested operations will be split and aligned according to the AXI specification. The AxiMaster module is capable of generating narrow bursts, handling multiple in-flight operations, and handling reordering and interleaving in responses across different transaction IDs.

The AxiMaster is a wrapper around AxiMasterWrite and AxiMasterRead. Similarly, AxiLiteMaster is a wrapper around AxiLiteMasterWrite and AxiLiteMasterRead. If a read-only or write-only interface is required instead of a full interface, use the corresponding read-only or write-only variant, the usage and API are exactly the same.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.axi import AxiMaster

axi_master = AxiMaster(dut, "s_axi", dut.clk, dut.rst)

The modules use cocotb.bus.Bus internally to automatically connect to the corresponding signals in the bus, presuming they are named according to the AXI spec and have a common prefix.

Once the module is instantiated, read and write operations can be initiated in a few different ways.

First, non-blocking operations can be started with init_read() and init_write(). These methods will queue up a read or write operation to be carried out over the interface. The result of the operation can be retrieved with get_read_data() and get_write_resp(). To monitor the status of the module, idle(), wait(), wait_read(), and wait_write() can be used. For example:

axi_master.init_write(0x0000, b'test')
await axi_master.wait()
resp = axi_master.get_write_resp()
axi_master.init_read(0x0000, 4)
await axi_master.wait()
data = axi_master.get_read_data()

Alternatively, an event object can be provided as an argument to init_read() and init_write(), and the result can be retrieved from Event.data. For example:

event = Event()
axi_master.init_write(0x0000, b'test', event=event)
await event.wait()
resp = event.data
event = Event()
axi_master.init_read(0x0000, 4, event=event)
await event.wait()
resp = event.data

Second, blocking operations can be carried out with read() and write() and their associated word-access wrappers. Multiple concurrent operations started from different coroutines are handled correctly. For example:

await axi_master.write(0x0000, b'test')
data = await axi_master.read(0x0000, 4)

read(), write(), get_read_data(), and get_write_resp() return namedtuple objects containing address, data or length, and resp.

AxiMaster and AxiLiteMaster constructor parameters

• entity: object that contains the AXI slave interface signals
• name: signal name prefix (e.g. for s_axi_awaddr, the prefix is s_axi)
• clock: clock signal
• reset: reset signal (optional)

Additional parameters for AxiMaster

• max_burst_len: maximum burst length in cycles, range 1-256, default 256.

Methods

• init_read(address, length, ...): initiate reading length bytes, starting at address
• init_write(address, data, ...): initiate writing data (bytes), starting from address
• idle(): returns True when there are no outstanding operations in progress
• wait(): blocking wait until all outstanding operations complete
• wait_read(): wait until all outstanding read operations complete
• wait_write(): wait until all outstanding write operations complete
• read_data_ready(): determine if any read read data is available
• get_read_data(): fetch first available read data
• write_resp_ready(): determine if any write response is available
• get_write_resp(): fetch first available write response
• read(address, length, ...): read length bytes, starting at address
• read_words(address, count, byteorder='little', ws=2, ...): read count ws-byte words, starting at address
• read_dwords(address, count, byteorder='little', ...): read count 4-byte dwords, starting at address
• read_qwords(address, count, byteorder='little', ...): read count 8-byte qwords, starting at address
• read_byte(address, ...): read single byte at address
• read_word(address, byteorder='little', ws=2, ...): read single ws-byte word at address
• read_dword(address, byteorder='little', ...): read single 4-byte dword at address
• read_qword(address, byteorder='little', ...): read single 8-byte qword at address
• write(address, data, ...): write data (bytes), starting at address
• write_words(address, data, byteorder='little', ws=2, ...): write data (ws-byte words), starting at address
• write_dwords(address, data, byteorder='little', ...): write data (4-byte dwords), starting at address
• write_qwords(address, data, byteorder='little', ...): write data (8-byte qwords), starting at address
• write_byte(address, data, ...): write single byte at address
• write_word(address, data, byteorder='little', ws=2, ...): write single ws-byte word at address
• write_dword(address, data, byteorder='little', ...): write single 4-byte dword at address
• write_qword(address, data, byteorder='little', ...): write single 8-byte qword at address

Additional optional arguments for AxiMaster

• arid,awid: AXI ID for bursts, default automatically assigned
• burst: AXI burst type, default AxiBurstType.INCR
• size: AXI burst size, default maximum supported by interface
• lock: AXI lock type, default AxiLockType.NORMAL
• cache: AXI cache field, default 0b0011
• prot: AXI protection flags, default AxiProt.NONSECURE
• qos: AXI QOS field, default 0
• region: AXI region field, default 0
• user: AXI user signal (awuser/aruser), default 0
• wuser: AXI wuser signal, default 0 (write-related methods only)
• event: Event object used to wait on and retrieve result for specific operation, default None (init_read() and init_write() only). If provided, the event will be triggered when the operation completes and the result returned via Event.data instead of get_read_data() or get_write_resp().

Additional optional arguments for AxiLiteMaster

• prot: AXI protection flags, default AxiProt.NONSECURE
• event: Event object used to wait on and retrieve result for specific operation, default None (init_read() and init_write() only). If provided, the event will be triggered when the operation completes and the result returned via Event.data instead of get_read_data() or get_write_resp().

AXI and AXI lite RAM

The AxiRam and AxiLiteRam classes implement AXI RAMs and are capable of completing read and write operations from upstream AXI masters. The AxiRam module is capable of handling narrow bursts.

The AxiRam is a wrapper around AxiRamWrite and AxiRamRead. Similarly, AxiLiteRam is a wrapper around AxiLiteRamWrite and AxiLiteRamRead. If a read-only or write-only interface is required instead of a full interface, use the corresponding read-only or write-only variant, the usage and API are exactly the same.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.axi import AxiRam

axi_ram = AxiRam(dut, "m_axi", dut.clk, dut.rst, size=2**16)

The modules use cocotb.bus.Bus internally to automatically connect to the corresponding signals in the bus, presuming they are named according to the AXI spec and have a common prefix.

Once the module is instantiated, the memory contents can be accessed in a couple of different ways. First, the mmap object can be accessed directly via the mem attribute. Second, read(), write(), and various word-access wrappers are available. Hex dump helper methods are also provided for debugging. For example:

axi_ram.write(0x0000, b'test')
data = axi_ram.read(0x0000, 4)

Multi-port memories can be constructed by passing the mem object of the first instance to the other instances. For example, here is how to create a four-port RAM:

axi_ram_p1 = AxiRam(dut, "m00_axi", dut.clk, dut.rst, size=2**16)
axi_ram_p2 = AxiRam(dut, "m01_axi", dut.clk, dut.rst, mem=axi_ram_p1.mem)
axi_ram_p3 = AxiRam(dut, "m02_axi", dut.clk, dut.rst, mem=axi_ram_p1.mem)
axi_ram_p4 = AxiRam(dut, "m03_axi", dut.clk, dut.rst, mem=axi_ram_p1.mem)

AxiRam and AxiLiteRam constructor parameters

• entity: object that contains the AXI master interface signals
• name: signal name prefix (e.g. for m_axi_awaddr, the prefix is m_axi)
• clock: clock signal
• reset: reset signal (optional)
• size: memory size in bytes (optional, default 1024)
• mem: mmap object to use (optional, overrides size)

Attributes:

• mem: directly access shared mmap object

Methods

• read(address, length): read length bytes, starting at address
• read_words(address, count, byteorder='little', ws=2): read count ws-byte words, starting at address
• read_dwords(address, count, byteorder='little'): read count 4-byte dwords, starting at address
• read_qwords(address, count, byteorder='little'): read count 8-byte qwords, starting at address
• read_byte(address): read single byte at address
• read_word(address, byteorder='little', ws=2): read single ws-byte word at address
• read_dword(address, byteorder='little'): read single 4-byte dword at address
• read_qword(address, byteorder='little'): read single 8-byte qword at address
• write(address, data): write data (bytes), starting at address
• write_words(address, data, byteorder='little', ws=2): write data (ws-byte words), starting at address
• write_dwords(address, data, byteorder='little'): write data (4-byte dwords), starting at address
• write_qwords(address, data, byteorder='little'): write data (8-byte qwords), starting at address
• write_byte(address, data): write single byte at address
• write_word(address, data, byteorder='little', ws=2): write single ws-byte word at address
• write_dword(address, data, byteorder='little'): write single 4-byte dword at address
• write_qword(address, data, byteorder='little'): write single 8-byte qword at address
• hexdump(address, length, prefix=''): print hex dump of length bytes starting from address, prefix lines with optional prefix
• hexdump_line(address, length, prefix=''): return hex dump (list of str) of length bytes starting from address, prefix lines with optional prefix
• hexdump_str(address, length, prefix=''): return hex dump (str) of length bytes starting from address, prefix lines with optional prefix

AXI stream

The AxiStreamSource, AxiStreamSink, and AxiStreamMonitor classes can be used to drive, receive, and monitor traffic on AXI stream interfaces. The AxiStreamSource drives all signals except for tready and can be used to drive AXI stream traffic into a design. The AxiStreamSink drives the tready line only and as such can receive AXI stream traffic and exert backpressure. The AxiStreamMonitor drives no signals and as such can be connected to internal AXI stream interfaces to monitor traffic.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.axi import AxiStreamSource, AxiStreamSink, AxiStreamMonitor

axis_source = AxiStreamSource(dut, "s_axis", dut.clk, dut.rst)
axis_sink = AxiStreamSink(dut, "m_axis", dut.clk, dut.rst)
axis_monitor = AxiStreamMonitor(dut.inst, "int_axis", dut.clk, dut.rst)

The modules use cocotb.bus.Bus internally to automatically connect to the corresponding signals in the bus, presuming they are named according to the AXI spec and have a common prefix.

To send data into a design with an AxiStreamSource, call send() or write(). Accepted data types are iterables or AxiStreamFrame objects. Call wait() to wait for the transmit operation to complete. Example:

axis_source.send(b'test data')
await axis_source.wait()

To receive data with an AxiStreamSink or AxiStreamMonitor, call recv() or read(). recv() is intended for use with a frame-oriented interface, and by default compacts AxiStreamFrames before returning them. read() is intended for non-frame-oriented streams. Calling read() internally calls recv() for all frames currently in the queue, then compacts and coalesces tdata from all frames into a separate read queue, from which read data is returned. All sideband data is discarded. Call wait() to wait for new receive data.

await axis_sink.wait()
data = axis_sink.recv()

Signals

• tdata: data, required
• tvalid: qualifies all other signals; optional, assumed 1 when absent
• tready: indicates sink is ready for data; optional, assumed 1 when absent
• tlast: marks the last cycle of a frame; optional, assumed 1 when absent
• tkeep: qualifies data byte, data bus width must be evenly divisible by tkeep signal width; optional, assumed 1 when absent
• tid: ID signal, can be used for routing; optional, assumed 0 when absent
• tdest: destination signal, can be used for routing; optional, assumed 0 when absent
• tuser: additional user data; optional, assumed 0 when absent

Constructor parameters:

• entity: object that contains the AXI stream interface signals
• name: signal name prefix (e.g. for m_axis_tdata, the prefix is m_axis)
• clock: clock signal
• reset: reset signal (optional)
• byte_size: byte size (optional)
• byte_lanes: byte lane count (optional)

Note: byte_size, byte_lanes, len(tdata), and len(tkeep) are all related, in that byte_lanes is set from tkeep if it is connected, and byte_size*byte_lanes == len(tdata). So, if tkeep is connected, both byte_size and byte_lanes will be computed internally and cannot be overridden. If tkeep is not connected, then either byte_size or byte_lanes can be specified, and the other will be computed such that byte_size*byte_lanes == len(tdata).

Attributes:

• pause: stall the interface (deassert tready or tvalid) (source/sink only)
• queue_occupancy_bytes: number of bytes in queue (all)
• queue_occupancy_frames: number of frames in queue (all)
• queue_occupancy_limit_bytes: max number of bytes in queue allowed before tready deassert (sink only)
• queue_occupancy_limit_frames: max number of frames in queue allowed before tready deassert (sink only)

Methods

• send(frame): send frame (blocking) (source)
• send_nowait(frame): send frame (non-blocking) (source)
• write(data): send data (alias of send) (blocking) (source)
• write_nowait(data): send data (alias of send_nowait) (non-blocking) (source)
• recv(compact=True): receive a frame as a GmiiFrame (blocking) (sink)
• recv_nowait(compact=True): receive a frame as a GmiiFrame (non-blocking) (sink)
• read(count): read count bytes from buffer (blocking) (sink/monitor)
• read_nowait(count): read count bytes from buffer (non-blocking) (sink/monitor)
• read(count): read count bytes from buffer (sink/monitor)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• full(): returns True if the queue occupancy limits are met (sink)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)
• set_pause_generator(generator): set generator for pause signal, generator will be advanced on every clock cycle (source/sink)
• clear_pause_generator(): remove generator for pause signal (source/sink)

AxiStreamFrame object

The AxiStreamFrame object is a container for a frame to be transferred via AXI stream. The tdata field contains the packet data in the form of a list of bytes, which is either a bytearray if the byte size is 8 bits or a list of ints otherwise. tkeep, tid, tdest, and tuser can either be None, an int, or a list of ints.

Attributes:

• tdata: bytes, bytearray, or list
• tkeep: tkeep field, optional; list, each entry qualifies the corresponding entry in tdata. Can be used to insert gaps on the source side.
• tid: tid field, optional; int or list with one entry per tdata, last value used per cycle when sending.
• tdest: tdest field, optional; int or list with one entry per tdata, last value used per cycle when sending.
• tuser: tuser field, optional; int or list with one entry per tdata, last value used per cycle when sending.

Methods:

• normalize(): pack tkeep, tid, tdest, and tuser to the same length as tdata, replicating last element if necessary, initialize tkeep to list of 1 and tid, tdest, and tuser to list of 0 if not specified.
• compact(): remove tdata, tid, tdest, and tuser values based on tkeep, remove tkeep, compact tid, tdest, and tuser to an int if all values are identical.

AXI signals

• Write address channel
  • awid: transaction ID
  • awaddr: address
  • awlen: burst length (cycles)
  • awsize: burst size (bytes/cycle)
  • awburst: burst type
  • awlock: lock type
  • awcache: cache control
  • awprot: protection bits
  • awqos: QoS field
  • awregion: region field
  • awuser: additional user sideband data
  • awvalid: valid signal, qualifies all channel fields
  • awready: ready signal, back-pressure from sink
• Write data channel
  • wdata: write data
  • wstrb: write strobe
  • wlast: end of burst flag
  • wuser: additional user sideband data
  • wvalid: valid signal, qualifies all channel fields
  • wready: ready signal, back-pressure from sink
• Write response channel
  • bid: transaction ID
  • bresp: write response
  • buser: additional user sideband data
  • bvalid: valid signal, qualifies all channel fields
  • bready: ready signal, back-pressure from sink
• Read address channel
  • arid: transaction ID
  • araddr: address
  • arlen: burst length (cycles)
  • arsize: burst size (bytes/cycle)
  • arburst: burst type
  • arlock: lock type
  • arcache: cache control
  • arprot: protection bits
  • arqos: QoS field
  • arregion: region field
  • aruser: additional user sideband data
  • arvalid: valid signal, qualifies all channel fields
  • arready: ready signal, back-pressure from sink
• Read data channel
  • rid: transaction ID
  • rdata: read data
  • rresp: read response
  • rlast: end of burst flag
  • ruser: additional user sideband data
  • rvalid: valid signal, qualifies all channel fields
  • rready: ready signal, back-pressure from sink

AXI lite signals

• Write address channel
  • awaddr: address
  • awprot: protection bits
  • awvalid: valid signal, qualifies all channel fields
  • awready: ready signal, back-pressure from sink
• Write data channel
  • wdata: write data
  • wstrb: write strobe
  • wvalid: valid signal, qualifies all channel fields
  • wready: ready signal, back-pressure from sink
• Write response channel
  • bresp: write response
  • bvalid: valid signal, qualifies all channel fields
  • bready: ready signal, back-pressure from sink
• Read address channel
  • araddr: address
  • arprot: protection bits
  • arvalid: valid signal, qualifies all channel fields
  • arready: ready signal, back-pressure from sink
• Read data channel
  • rdata: read data
  • rresp: read response
  • rvalid: valid signal, qualifies all channel fields
  • rready: ready signal, back-pressure from sink

AXI stream signals

• tdata: data
• tvalid: qualifies all other signals
• tready: indicates sink is ready for data
• tlast: marks the last cycle of a frame
• tkeep: qualifies data bytes in tdata
• tid: ID signal, can be used for routing
• tdest: destination signal, can be used for routing
• tuser: additional sideband data