cocotbext-eth 0.1.0

Ethernet interface modules for cocotb

Ethernet interface modules for Cocotb

GitHub repository: https://github.com/alexforencich/cocotbext-eth

Introduction

Ethernet interface models for cocotb.

Installation

Installation from pip (release version, stable):

$ pip install cocotbext-eth

Installation from git (latest development version, potentially unstable):

$ pip install https://github.com/alexforencich/cocotbext-eth/archive/master.zip

Installation for active development:

$ git clone https://github.com/alexforencich/cocotbext-eth
$ pip install -e cocotbext-eth

Documentation and usage examples

See the tests directory and verilog-ethernet for complete testbenches using these modules.

GMII

The GmiiSource and GmiiSink classes can be used to drive, receive, and monitor GMII traffic. The GmiiSource drives GMII traffic into a design. The GmiiSink receives GMII traffic, including monitoring internal interfaces.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import GmiiSource, GmiiSink

gmii_source = GmiiSource(dut.rxd, dut.rx_er, dut.rx_en, dut.clk, dut.rst)
gmii_sink = GmiiSink(dut.txd, dut.tx_er, dut.tx_en, dut.clk, dut.rst)

To send data into a design with an GmiiSource, call send(). Accepted data types are iterables that can be converted to bytearray or GmiiFrame objects. Call wait() to wait for the transmit operation to complete. Example:

gmii_source.send(GmiiFrame.from_payload(b'test data'))
await gmii_source.wait()

To receive data with a GmiiSink, call recv(). Call wait() to wait for new receive data.

await gmii_sink.wait()
data = gmii_sink.recv()

Signals

• txd, rxd: data
• tx_er, rx_er: error (when asserted with tx_en or rx_dv)
• tx_en, rx_dv: data valid

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• er: error signal (tx_er, rx_er, etc.) (optional)
• dv: data valid signal (tx_en, rx_dv, etc.)
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)
• mii_select: MII mode select (optional)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue

Methods

• send(frame): send frame (source)
• recv(): receive a frame as a GmiiFrame (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

GmiiFrame object

The GmiiFrame object is a container for a frame to be transferred via GMII. The data field contains the packet data in the form of a list of bytes. error contains the er signal level state associated with each byte as a list of ints.

Attributes:

• data: bytearray
• error: error field, optional; list, each entry qualifies the corresponding entry in data.
• rx_sim_time: simulation time when packet was received by sink.

Methods:

• from_payload(payload, min_len=60): create GmiiFrame from payload data, inserts preamble, zero-pads frame to minimum length and computes and inserts FCS (class method)
• from_raw_payload(payload): create GmiiFrame from payload data, inserts preamble only (class method)
• get_preamble_len(): locate SFD and return preamble length
• get_preamble(): return preamble
• get_payload(strip_fcs=True): return payload, optionally strip FCS
• get_fcs(): return FCS
• check_fcs(): returns True if FCS is correct
• normalize(): pack error to the same length as data, replicating last element if necessary, initialize to list of 0 if not specified.
• compact(): remove error if all zero

RGMII

The RgmiiSource and RgmiiSink classes can be used to drive, receive, and monitor RGMII traffic. The RgmiiSource drives RGMII traffic into a design. The RgmiiSink receives RGMII traffic, including monitoring internal interfaces.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import RgmiiSource, RgmiiSink

rgmii_source = RgmiiSource(dut.rxd, dut.rx_ctl, dut.clk, dut.rst)
rgmii_sink = RgmiiSink(dut.txd, dut.tx_ctl, dut.clk, dut.rst)

All signals must be passed separately into these classes.

To send data into a design with an RgmiiSource, call send(). Accepted data types are iterables that can be converted to bytearray or GmiiFrame objects. Call wait() to wait for the transmit operation to complete. Example:

rgmii_source.send(GmiiFrame.from_payload(b'test data'))
await rgmii_source.wait()

To receive data with an RgmiiSink, call recv(). Call wait() to wait for new receive data.

await rgmii_sink.wait()
data = rgmii_sink.recv()

Signals

• txd, rxd: data (DDR)
• tx_ctl, rx_ctl: control (DDR, combination of valid and error)

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• ctrl: control
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)
• mii_select: MII mode select (optional)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue

Methods

• send(frame): send frame (source)
• recv(): receive a frame as a GmiiFrame (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

XGMII

The XgmiiSource and XgmiiSink classes can be used to drive, receive, and monitor XGMII traffic. The XgmiiSource drives XGMII traffic into a design. The XgmiiSink receives XGMII traffic, including monitoring internal interfaces. The modules are capable of operating with XGMII interface widths of 32 or 64 bits.

To use these modules, import the one you need and connect it to the DUT:

from cocotbext.eth import XgmiiSource, XgmiiSink

xgmii_source = XgmiiSource(dut.rxd, dut.rxc, dut.clk, dut.rst)
xgmii_sink = XgmiiSink(dut.txd, dut.txc, dut.clk, dut.rst)

All signals must be passed separately into these classes.

To send data into a design with an XgmiiSource, call send(). Accepted data types are iterables that can be converted to bytearray or XgmiiFrame objects. Call wait() to wait for the transmit operation to complete. Example:

xgmii_source.send(XgmiiFrame.from_payload(b'test data'))
await xgmii_source.wait()

To receive data with an XgmiiSink, call recv(). Call wait() to wait for new receive data.

await xgmii_sink.wait()
data = xgmii_sink.recv()

Signals

• txd, rxd: data
• txc, rxc: control

Constructor parameters:

• data: data signal (txd, rxd, etc.)
• ctrl: control signal (txc, rxc, etc.)
• clock: clock signal
• reset: reset signal (optional)
• enable: clock enable (optional)

Attributes:

• queue_occupancy_bytes: number of bytes in queue
• queue_occupancy_frames: number of frames in queue

Methods

• send(frame): send frame (source)
• recv(): receive a frame as an XgmiiFrame (sink)
• count(): returns the number of items in the queue (all)
• empty(): returns True if the queue is empty (all)
• idle(): returns True if no transfer is in progress (all) or if the queue is not empty (source)
• wait(): wait for idle (source)
• wait(timeout=0, timeout_unit='ns'): wait for frame received (sink)

XgmiiFrame object

The XgmiiFrame object is a container for a frame to be transferred via XGMII. The data field contains the packet data in the form of a list of bytes. ctrl contains the control signal level state associated with each byte as a list of ints. When ctrl is high, the corresponding data byte is interpreted as an XGMII control character.

Attributes:

• data: bytearray
• ctrl: control field, optional; list, each entry qualifies the corresponding entry in data as an XGMII control character.
• rx_sim_time: simulation time when packet was received by sink.
• rx_start_lane: byte lane that the frame start control character was received in.

Methods:

• from_payload(payload, min_len=60): create XgmiiFrame from payload data, inserts preamble, zero-pads frame to minimum length and computes and inserts FCS (class method)
• from_raw_payload(payload): create XgmiiFrame from payload data, inserts preamble only (class method)
• get_preamble_len(): locate SFD and return preamble length
• get_preamble(): return preamble
• get_payload(strip_fcs=True): return payload, optionally strip FCS
• get_fcs(): return FCS
• check_fcs(): returns True if FCS is correct
• normalize(): pack error to the same length as data, replicating last element if necessary, initialize to list of 0 if not specified.
• compact(): remove error if all zero

PTP clock

The PtpClock class implements a PTP hardware clock that produces IEEE 1588 format 96 and 64 bit PTP timestamps.

To use this module, import it and connect it to the DUT:

from cocotbext.eth import PtpClock

ptp_clock = PtpClock(
    ts_96=dut.ts_96,
    ts_64=dut.ts_64,
    ts_step=dut.ts_step,
    pps=dut.pps,
    clock=dut.clk,
    reset=dut.reset,
    period_ns=6.4
)

Once the clock is instantiated, it will generate a continuous stream of monotonically increasing PTP timestamps on every clock edge.

Signals

• ts_96: 96-bit timestamp (48 bit seconds, 32 bit ns, 16 bit fractional ns)
• ts_64: 64-bit timestamp (48 bit ns, 16 bit fractional ns)
• ts_step: step output, pulsed when non-monotonic step occurs
• pps: pulse-per-second output, pulsed when ts_96 seconds field increments

Constructor parameters:

• ts_96: 96-bit timestamp signal (optional)
• ts_64: 64-bit timestamp signal (optional)
• ts_step: timestamp step signal (optional)
• pps: pulse-per-second signal (optional)
• clock: clock
• reset: reset (optional)
• period_ns: clock period (nanoseconds)

Attributes:

• ts_96_s: current 96-bit timestamp seconds field
• ts_96_ns: current 96-bit timestamp ns field
• ts_96_fns: current 96-bit timestamp fractional ns field
• ts_64_ns: current 64-bit timestamp ns field
• ts_64_fns: current 64-bit timestamp fractional ns field

Methods

• set_period(ns, fns): set clock period from separate fields
• set_drift(ns, fns, rate): set clock drift from separate fields
• set_period_ns(t): set clock period in ns (float)
• get_period_ns(): return current clock period in ns (float)
• set_ts_96(ts_s, ts_ns=None, ts_fns=None): set 96-bit timestamp from integer or from separate fields
• set_ts_96_ns(t): set 96-bit timestamp from ns (float)
• set_ts_96_s(t): set 96-bit timestamp from seconds (float)
• get_ts_96(): return current 96-bit timestamp as an integer
• get_ts_96_ns(): return current 96-bit timestamp in ns (float)
• get_ts_96_s(): return current 96-bit timestamp in seconds (float)
• set_ts_64(ts_ns, ts_fns=None): set 64-bit timestamp from integer or from separate fields
• set_ts_64_ns(t): set 64-bit timestamp from ns (float)
• set_ts_64_s(t): set 64-bit timestamp from seconds (float)
• get_ts_64(): return current 64-bit timestamp as an integer
• get_ts_64_ns(): return current 64-bit timestamp in ns (float)
• get_ts_64_s(): return current 64-bit timestamp in seconds (float)