Utility/library for checking connectivity between services
Project description
conn-check allows for checking connectivity with external services.
You can write a config file that defines services that you need to have access to, and conn-check will check connectivity with each.
It supports various types of services, all of which allow for basic network checks, but some allow for confirming credentials work also.
Configuration
The configuration is done via a yaml file. The file defines a list of checks to do:
- type: tcp
host: localhost
port: 80
- type: tls
host: localhost
port: 443
disable_tls_verification: false
Each check defines a type, and then options as appropriate for that type.
For a step by step guide on configuring conn-check for your application see the tutorial.
Check Types
tcp
A simple tcp connectivity check.
- host
The host.
- port
The port.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
tls
A check that uses TLS (ssl is a deprecated alias for this type).
- host
The host.
- port
The port.
- disable_tls_verification
Optional flag to disable verification of TLS certs and handshake. Default: false.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
udp
Check that sending a specific UDP packet gets a specific response.
- host
The host.
- port
The port.
- send
The string to send.
- expect
The string to expect in the response.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
http
Check that a HTTP/HTTPS request succeeds (https also works).
- url
The URL to fetch.
- method
Optional HTTP method to use. Default: “GET”.
- expected_code
Optional status code that defines success. Default: 200.
- proxy_url
Optional HTTP/HTTPS proxy URL to connect via, including protocol, if set proxy_{host,port} are ignored.
- proxy_host
Optional HTTP/HTTPS proxy to connect via.
- proxy_port
Optional port to use with proxy_host. Default: 8000.
- headers:
Optional headers to send, as a dict of key-values. Multiple values can be given as a list/tuple of lists/tuples, e.g.: [('foo', 'bar'), ('foo', 'baz')]
- body:
Optional raw request body string to send.
- disable_tls_verification:
Optional flag to disable verification of TLS certs and handshake. Default: false.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
- allow_redirects
Optional flag to Follow 30x redirects. Default: false.
- params
Optional dict of params to URL encode and pass in the querystring.
- cookies
Optional dict of cookies to pass in the request headers.
- auth
Optional basic HTTP auth credentials, as a tuple/list: (username, password).
- digest_auth
Optional digest HTTP auth credentials, as a tuple/list: (username, password).
amqp
Check that an AMQP server can be authenticated against.
- host
The host.
- port
The port.
- username
The username to authenticate with.
- password
The password to authenticate with.
- use_tls
Optional flag whether to connect with TLS. Default: true.
- vhost
Optional vhost name to connect to. Default ‘/’.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
postgres
Check that a PostgreSQL db can be authenticated against (postgresql also works).
- host
The host.
- port
The port.
- username
The username to authenticate with.
- password
The password to authenticate with.
- database
The database to connect to.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
redis
Check that a redis server is present, optionally checking authentication.
- host
The host.
- port
The port.
- password
Optional password to authenticatie with.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
memcache
Check that a memcached server is present (memcached also works).
- host
The host.
- port
The port.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
mongodb
Check that a MongoDB server is present (mongo also works).
- host
The host.
- port
Optional port. Default: 27017.
- username
Optional username to authenticate with.
- password
Optional password to authenticate with.
- database
Optional database name to connect to, if not set the test database will be used, if this database does not exist (or is not available to the user) you will need to provide a database name.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
smtp
Check that we can reach, authenticate with and send an email using an SMTP server.
Note 1: if this check succeeds an email is actually sent to the email defined in to_address, be careful how this is check is configured so it doesn’t unintentionally spam anyone.
Note 2: only EHLO/HELO over a TLS connection is supported with the use_tls flag, this check cannot currently create new TLS connection using the STARTTLS Extension.
- host
The host.
- port
The port, normally 465 for TLS and 25 for plaintext.
- username
Username to authenticate with.
- password
Password to authenticate with.
- from_address:
Email address to send from.
- to_address:
Email address to send to.
- message:
Optional email body.
- subject:
Optional email subject.
- helo_fallback:
Optional flag that defines whether to fall back to HELO if the EHLO extended command set fails.
- use_tls:
Optional flag to enable TLS security on connection. Default: true.
- timeout
Optional connection timeout in seconds. Default: 10 (or value from --connect-timeout).
Buffered/Ordered output
conn-check normally executes with output to STDOUT buffered so that the output can be ordered, with failed checks being printed first, grouping by destination etc.
If you’d rather see results as they available you can use the -U/--unbuffered-output option to disable buffering.
Generating firewall rules
conn-check includes the conn-check-export-fw utility which takes the same arguments as conn-check but runs using --dry-run mode and outputs a set of egress firewall rules in an easy to parse YAML format, for example:
# Generated from the conn-check demo.yaml file
egress:
- from_host: mydevmachine
ports: [8080]
protocol: udp
to_host: localhost
- from_host: mydevmachine
ports: [80, 443]
protocol: tcp
to_host: login.ubuntu.com
- from_host: mydevmachine
ports: [6379, 11211]
protocol: tcp
to_host: 127.0.0.1
You can then use this output to generate your environments firewall rules (e.g. with EC2 security groups, OpenStack Neutron, iptables etc.).
conn-check-convert-fw is a utility that does just this, it accepts multiple firewall rule YAML files, merges/de-dupes them, and outputs commands for AWS, Openstack Neutron, OpenStack Nova (client), iptables, and ufw (mostly for testing purposes).
It is designed for this workflow:
On each host you run conn-check from, you run conn-check-export-fw to generate a YAML file containing egress firewall rules.
Each of these files is transfered to a host with the correct DNS entries for the egress hosts.
On this host conn-check-convert-fw is run to generate a set of commands for your firewall.
These commands are audited by a human / possibly merged with other rules, such as adding ingress rules, and then run to update your environment’s firewall.
Building wheels
To allow for easier/more portable distribution of this tool you can build conn-check and all its dependencies as Python wheels:
make clean-wheels make build-wheels make build-wheels-extra EXTRA=amqp make build-wheels-extra EXTRA=redis
The build-wheels make target will build conn-check and its base dependencies, but to include the optional extra dependencies for other checks such as amqp, redis or postgres you need to use the build-wheels-extra target with the EXTRA env value.
By default all the wheels will be placed in ./wheels.
Automatically generating conn-check YAML configurations
The conn-check-configs package contains utilities/libraries for generating checks from existing application configurations and environments, e.g. from Django settings modules and Juju environments.
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Hashes for conn_check-1.3.0-py2-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | 0db68b1a0c5bd73ddd6c684d4335f7c73852f8372642acda46de079e44bd01be |
|
MD5 | c12a611d8bca874c192e60cfb4945541 |
|
BLAKE2b-256 | fa31ea78264997de5bae41b462bd0d1e9b1ed98fbcded38897edbbd17a5441e7 |