crecomp 1.4.0

creator for Reconfigurable Component. Framework and Code generator for FPGA component

cReComp

creator for Reconfigurable hw Component

Git: https://github.com/kazuyamashi/cReComp.git

Author: Kazushi Yamashina (Utsunomiya University)

Copyright: 2016, Kazushi Yamashina

License: new BSD License

Latest Version: 1.4.0

Contact: kazushi_at_virgo.is.utsunomiya-u.ac.jp or Twitter or Facebook

What is the cReComp?

The cReComp is a code generator and framework for componentization of a single hardware or the multiple hardware. The component generated by the cReComp is HW/SW co-system that is connected between CPU and FPGA (reconfigurable hw). The cReComp is possible to debug and test single hardware with software in a user development phase. When the development of a each hardware have been finished, the cReComp generates one of the HW/SW co-system by integrating the each of the hardware.

Update

• 2016/07/25 version 1.4.0

  • scrp_parser was improved functionally and become to be able to parse more accurately

• 2016/07/05 version 1.3.0

  • scrp supported ROS packages generation

• 2016/07/04 version 1.1.0 & 1.2.0

  • cReComp supported configuration with scrp (specification for cReComp)

  • cReComp supported ROS package generation

• 2016/06/30 version 1.0.0

  • Released first version

Install

Requirements

Platform

Ubuntu or OSX (Mac)

Python (2.7 later, not 3.0)

sudo apt-get install python

Icarus Verilog

Ubuntu

sudo apt-get install iverilog

Mac

brew install icarus-verilog

PLY (Python-Lex-Yacc)

pip install ply

Jinja2

pip install jinja2

pyverilog

git clone https://github.com/PyHDI/pyverilog.git
cd pyverilog/
python setup.py install

veriloggen

git clone https://github.com/PyHDI/veriloggen.git
cd veriloggen/
python setup.py install

Install cReComp

Download from github & install

git clone https://github.com/kazuyamashi/cReComp.git
cd cReComp/
python setup.py install

Package install

pip install crecomp

Command usage

Usage: crecomp [option] [file path] [-u user logic]+

Options:
    -h, --help            show this help message and exit
    -u USERLOGIC, --userlogic=USERLOGIC
                                                specifier your user logic name
    -p PYTHON_TEMPLATENAME, --python_template=PYTHON_TEMPLATENAME
                                                specifier for template name
    -s SCRP_TEMPLATENAME, --scrp_template=SCRP_TEMPLATENAME
                                                specifier for template name
    -b SCRP_PATH, --build=SCRP_PATH
                                                specifier target scrp file to build for componentize

Getting Started

Getting Started English

Getting Started Japanese