cscmiko 0.0.19

cisco devices SDK based on netmiko

cscmiko SDK

SDK for cisco Catalyst , Nexus, ASA, wireless lan controllers, built using Netmiko and ntc-templates,

Installing

pip install cscmiko

Getting Started

Example 1:

to get interfaces from the device:

from cscmiko.devices import CatSwitch
my_switch = CatSwitch(host='192.168.1.1', username='admin', password='admin')
my_switch.fetch_interfaces()

for interface in my_switch.interfaces :
    print(interface.name , " is " , interface.link_status)

results :

GigabitEthernet1/1/1  is  administratively down
GigabitEthernet1/1/2  is  administratively down
GigabitEthernet1/1/3  is  administratively down
TenGigabitEthernet1/1/4  is  up
TenGigabitEthernet1/1/5  is  up
TenGigabitEthernet1/2/1  is  down
TenGigabitEthernet1/2/2  is  up

you can also filter:

filtered = my_switch.filter(status = 'down')  # return list of down interfaces objects

Example 2:

to add a VLAN to the device:

from cscmiko.devices import CatSwitch
my_switch = CatSwitch(host='192.168.1.1', username='admin', password='admin')
my_switch.fetch_vlans()
my_switch.vlans.add(id='911', name="Vlan911")
is_ok, msgs = my_switch.commit()
print(is_ok)

results:

True

Example 3:

Nexus switch

from cscmiko.devices import NexusSwitch
my_switch = NexusSwitch(host='192.168.1.2', username='admin', password='admin')
my_switch.fetch_vpc()

print("list of up VPCs :")
for vpc in my_switch.vpcs:
    if vpc.is_up:
        print("id:",vpc.id,"- port: ",vpc.port)

results:

list of up VPCs :
id: 1 - port:  Po99

Contributing

Please read CONTRIBUTING.md for details on our code of conduct, and the process for submitting pull requests to us.