dannytrigo-onkyo-eiscp 1.2.14

Control Onkyo receivers over ethernet. (dannytrigo fork for bugfix)

This is a Python library to control and interact with Onkyo receivers over the network. It is also a ready-made command line script you can use without knowing how to program.

Finally, this repository contains a YAML file containing all the commands defined by the Onkyo protocol, automatically generated by parsing the official documentation. Even if you are not using Python, you may find this file useful when implementing your own interface. See further down below for more information.

Installation

Most recent released version:

$ easy_install onkyo-eiscp

Usage

The package installs a script called onkyo, that can be used from the command line:

$ onkyo system-power=off

This will turn your receiver off. You may notice that you haven’t given any information as to where in the network your receiver is. The script should in fact be able to find your Onkyo device by itself.

To see which receivers the script is able to find, you can use:

$ onkyo --discover

If you have multiple receivers on your network, then by default, it will simply connect to the first device found (which may be a different one every time).

You can select a specific one by filtering by name:

$ onkyo --discover
TX-NR709 192.168.178.200:60128 0009B0D34163
TX-NR609 192.168.178.169:60128 0009B0D24B75

$ onkyo -n 709 system-power=on

This will only turn on the TX-NR709 device.

Or using the unique identifier:

$ onkyo -i 0009B0D24B75 system-power=on

This will turn on the TX-NR609 device.

There is also an --all flag, to send you commands to all devices at once.

Finally, you are of course able to manually specify the device to connect to:

$ onkyo --host 172.20.0.144 volume=55
$ onkyo --host 172.20.0.144 --port 42424 volume=55

To find out which commands are available, use the --help-commands option.

Commands

A command consists of three parts: The zone, the command, and the arguments. Here are some examples:

system-power=on
zone2.power=on
main.balance=3

As you can see, the basic format is:

zone.command=argument

If you do not specify a zone, then main is assumed.

There are some variations on this syntax that are possible, for example the following are all equivalent:

power on
power:on
main.power on
main power on

In other words, instead of the . and = separators, whitespace may be used, and the colon : is an alternative to =. However, it’s best to use the suggested syntax above.

The names of these commands are defined by this project, and are rewritten to actual low-level eISCP commands Onkyo uses. If you know them, you can also send such low-level commands directly:

$ onkyo SLI26     # Selects the "Tuner" source.

Notes on Power On

For the power on command to work while the device is in standby, make sure you turn on the obtusely named Setup -> Hardware -> Network -> Network Control option.

Without it, you can only connect to your receiver while it is already turned on.

Python module

In a simple case, this might look like this:

import eiscp

# Create a receiver object, connecting to the host
receiver = eiscp.eISCP('192.168.1.125')

# Turn the receiver on, select PC input
receiver.command('power on')
receiver.command('source pc')

receiver.disconnect()

Don’t forget to call disconnect() to close the socket. You can also use a with statement:

with eiscp.eISCP('192.168.1.125') as receiver:
    receiver.command('source all-ch-stereo')

The command language is explained above. You can also be more explict with the structure:

receiver.command('power', 'on', zone='main')

If you prefer to send low-level ISCP commands directly, you can use the raw method:

receiver.raw('MVLUP')

The function command_to_iscp will allow you to convert a high-level command to a low-level ISCP message for use with eISCP.raw.

Receiving messages

The Onkyo receiver will send messages to you as well. Specifically, it returns a response to every command you send, either by repeating the command you have sent back to you, or, in case you sent a query message, reporting the answer to you query. It will also send unsolicited status updates to you whenver the state of the receiver changes.

API-wise, the eISCP.raw and eISCP.command return the response received from the Onkyo device. They are blocking.

To receive other messages, there is eISCP.get, which will either return a message or None. You may specify a custom timeout value.

Warning

At least for now, there is no queue. If you call eISCP.raw or eISCP.command, any messages not picked up via eISCP.get are lost.

A problem with the Onkyo protocol is that there is no fool-proof way to differentiate a response from unsolicited status updates. Generally, this won’t be an issue, though in theory the response that is given to you after sending SLI05 may be a SLI06 update from another controller.

It is thus preferable to approach the protocol in a different way. Instead of using eISCP.raw or eISCP.command, which try to serialize the exchange into a request-response scheme, you may also use eISCP.send, which dispatches a message without waiting for a response. You would then use get to process all incoming messages in the same way, regardless of why they were sent. This works well, since a response to either a command or a query is no different than a status update.

Async API

There is also an experimental eiscp.Receiver, which has the same api as eiscp.eISCP, but uses a background thread for network communication. This allows you to handle incoming messages via a callback:

def message_received(message):
    print message

receiver = Receiver('...')
receiver.on_message = message_received

Note that the on_message handler is executed on the background thread, so you may want to use a queue.

For consistancy, eISCP.raw and eISCP.command are still designed to artificially block, while eISCP.send is non-blocking.

Device discovery

You can have it find the receivers on your local network:

for receiver in eiscp.eISCP.discover(timeout=5):
    receiver.command('power off')

This will turn off all the Onkyo receivers on your network.

A discovered device has an info attribute that gives you some data:

{'iscp_port': '60128', 'identifier': '0009B04448E0',
 'area_code': 'XX', 'model_name': 'TX-NR709', 'device_category': '1'}

Limitations

• Some commands require a more complex argument structure, like variable-length strings, and those are not yet supported (you can send them in raw mode of course).

The YAML file

This repository contains a YAML file containing all the commands defined by the Onkyo protocol, automatically generated by parsing the official Excel documentation, and then further adjusted manually.

The idea is to have a computer-readable definition of the Onkyo protocol, where Onkyo’s internal low-level commands are mapped to identifiers that can be understood by humans, and which include descriptions.

Parsing the Onkyo Excel document gets you astonishingly far, but there’s a limit. The YAML file requires manual edits and fixes where the parser fails, including a lot of cosmetic corrections. Some of those have been made, but there’s significant room for improving the YAML description of the protocol.

The process and the specific YAML formatting have been chosen to allow future changes to the Onkyo master document to be merged with the manual adjustments made as painlessly as possible.

To summarize, if you are implementing your own interface to Onkyo, even if it’s in a language other than Python, I encourage you to consider using this YAML file as a basis for the command interface you provide to users. You’ll have a complete list of available commands, values, and even supported devices.

Related Links

Documents from Onkyo describing the protocol, including lists of supported commands:

• http://michael.elsdoerfer.name/onkyo/ISCP_AVR_134.xlsx

• http://michael.elsdoerfer.name/onkyo/ISCP_AVR_2014.Models.xlsx

• http://michael.elsdoerfer.name/onkyo/ISCP-V1.26_2013.xlsx

• http://michael.elsdoerfer.name/onkyo/ISCP-V1.21_2011.xls

The repository on which this was originally based on:

https://github.com/compbrain/Onkyo-TX-NR708-Control

An implementation in Perl:

https://github.com/beanz/device-onkyo-perl

An implementation in C#:

http://code.google.com/p/onkyo-eiscp-remote-windows/

An implementation in Object-C:

https://github.com/janten/onkyo-eiscp-remote-mac

MQTT connectivity for onkyo-eiscp, adhering to the mqtt-smarthome specification:

https://github.com/owagner/onkyo2mqtt

Some Java code that deserves credit for providing the original Onkyo protocol documentation linked above:

https://sites.google.com/a/webarts.ca/toms-blog/Blog/new-blog-items/javaeiscp-integraserialcontrolprotocol