datapusher-plus 0.10.1

A standalone web service that parses the contents of a CKAN site's data files (CSV, TSV, Excel and ODS) and pushes them into its DataStore. Accelerated by qsv.

DataPusher+

DataPusher+ is a fork of Datapusher that combines the speed and robustness of ckanext-xloader with the data type guessing of Datapusher.

Datapusher+ is built using CKAN Service Provider, with Messytables replaced by qsv.

TNRIS/TWDB provided the use cases that informed and supported the development of Datapusher+, specifically, to support a Resource-first upload workflow.

For a more detailed overview, see the CKAN Monthly Live Jan 2023 presentation.

It features:

• "Bullet-proof", ultra-fast data type inferencing with qsv

  Unlike Messytables which scans only the the first few rows to guess the type of a column, qsv scans the entire table so its data type inferences are guaranteed[^1].

  Despite this, qsv is still exponentially faster even if it scans the whole file, not only inferring data types, it also calculates some descriptive statistics as well. For example, scanning a 2.7 million row, 124MB CSV file for types and stats took 0.16 seconds[^2].

  It is very fast as qsv is written in Rust, is multithreaded, and uses all kinds of performance techniques especially designed for data-wrangling.

• Exponentially faster loading speed

  Similar to xloader, we use PostgreSQL COPY to directly pipe the data into the datastore, short-circuiting the additional processing/transformation/API calls used by Datapusher.

  But unlike xloader, we load everything using the proper data types and not as text, so there's no need to reload the data again after adjusting the Data Dictionary, as you would with xloader.

• Production-ready Robustness

  In production, the number one source of support issues is Datapusher - primarily, because of data quality issues and Datapusher's inability to correctly infer data types, gracefully handle errors[^3], and provide the Data Publisher actionable information to correct the data.

  Datapusher+'s design directly addresses all these issues.

• More informative datastore loading messages

  Datapusher+ messages are designed to be more verbose and actionable, so the data publisher's user experience is far better and makes it possible to have a resource-first upload workflow.

• Extended preprocessing with qsv

  Apart from bullet-proof data type inferences, qsv is leveraged by Datapusher+ to convert Excel & ODS files; count the number of rows; transcode to UTF-8 if required; validate if a CSV conforms to the RFC 4180 standard; sanitize header names so they are always valid Postgres column identifers; optionally create a preview subset and optionally deduplicate rows.

  Future versions of Datapusher+ will further leverage qsv's 80+ commands to do additional preprocessing, data-wrangling and validation. The Roadmap is available here. Ideas, suggestions and your feedback are most welcome!

[^1]: Why use qsv instead of a "proper" python data analysis library like pandas? [^2]: It takes 0.16 seconds with an index to run qsv stats against the qsv whirlwind tour sample file on a Ryzen 4800H (8 physical/16 logical cores) with 32 gb memory and a 1 TB SSD. Without an index, it takes 1.3 seconds. [^3]: Imagine you have a 1M row CSV, and the last row has an invalid value for a numeric column (e.g. "N/A" instead of a number). After spending hours pushing the data very slowly, legacy datapusher will abort on the last row and the ENTIRE job is invalid. Ok, that's bad, but what makes it worse is that the old table has been deleted already, and Datapusher doesn't tell you what caused the job to fail! YIKES!!!!

Development Installation

Datapusher+ is a drop-in replacement for Datapusher, so it's installed the same way.

1. Install the required packages.

   sudo apt-get install python3-dev python3-virtualenv build-essential libxslt1-dev libxml2-dev zlib1g-dev git libffi-dev libpq-dev
   

2. Create a virtual environment for Datapusher+ using at least python 3.8.

   cd /usr/lib/ckan
   sudo python3.8 -m venv dpplus_venv
   sudo chown -R $(whoami) dpplus_venv
   . dpplus_venv/bin/activate
   cd dpplus_venv
   

   ℹ️ NOTE: DP+ requires at least python 3.8 as it makes extensive use of new capabilities introduced in 3.7/3.8 to the subprocess module. If you're using Ubuntu 18.04 or earlier, follow the procedure below to install python 3.8:

   sudo add-apt-repository ppa:deadsnakes/ppa
   # we use 3.8 here, but you can get a higher version by changing the version suffix of the packages below
   sudo apt install python3.8 python3.8-venv python3.8-dev
   # install additional dependencies
   sudo apt install build-essential libxslt1-dev libxml2-dev zlib1g-dev git libffi-dev
   

   Note that DP+ still works with CKAN<=2.8, which uses older versions of python.

3. Get the code.

   git clone --branch 0.10.1 https://github.com/datHere/datapusher-plus
   cd datapusher-plus
   

4. Install the dependencies.

   pip install -r requirements-dev.txt
   pip install -e .
   

5. Install qsv.

   Download the appropriate precompiled binaries for your platform and copy it to the appropriate directory, e.g. for Linux:

   wget https://github.com/jqnatividad/qsv/releases/download/0.87.1/qsv-0.87.1-x86_64-unknown-linux-gnu.zip
   unzip qsv-0.87.1-x86_64-unknown-linux-gnu.zip
   rm qsv-0.87.1-x86_64-unknown-linux-gnu.zip
   sudo mv qsv* /usr/local/bin
   

   Alternatively, if you want to install qsv from source, follow the instructions here. Note that when compiling from source, you may want to look into the Performance Tuning section to squeeze even more performance from qsv.

   Also, if you get glibc errors when starting qsv, your Linux distro may not have the required version of the GNU C Library (This will be the case when running Ubuntu 18.04 or older). If so, use the unknown-linux-musl.zip archive as it is statically linked with the MUSL C Library.

   If you already have qsv, update it to the latest release by using the --update option.

   qsvdp --update

   ℹ️ NOTE: qsv is a general purpose CSV data-wrangling toolkit that gets regular updates. To update to the latest version, just run qsv with the --update option and it will check for the latest version and update as required.

6. Configure the Datapusher+ database.

   Make sure to create the datapusher PostgreSQL user and the datapusher_jobs database (see DataPusher+ Database Setup).

7. Copy the datapusher/dot-env.template to datapusher/.env and modify your configuration.

   cd datapusher
   cp dot-env.template .env
   # configure your installation as required
   nano .env
   

8. Run Datapusher+.

   python3 datapusher/main.py datapusher/config.py
   

   By default, DP+ should be running at the following port:

   http://localhost:8800/

Production deployment

Manual installation

These instructions assume you already have CKAN installed on this server in the default location described in the CKAN install documentation (/usr/lib/ckan/default). If this is the case, you should be able to run the following commands directly, if not you will need to adapt the previous path to your needs.

These instructions set up the DataPusher web service on uWSGI running on port 8800, but can be easily adapted to other WSGI servers like Gunicorn. You'll probably need to set up Nginx as a reverse proxy in front of it and something like Supervisor to keep the process up.

# Install requirements for DataPusher+. Be sure to have at least Python 3.8
sudo apt install python3-venv python3-dev build-essential libxslt1-dev libxml2-dev libffi-dev libpq-dev
 
cd /usr/lib/ckan

# Create a virtualenv for DataPusher+. DP+ requires at least python 3.8.
sudo python3.8 -m venv /usr/lib/ckan/dpplus_venv

# Install qsv binary, if required
wget https://github.com/jqnatividad/qsv/releases/download/0.87.1/qsv-0.87.1-x86_64-unknown-linux-gnu.zip
unzip qsv-0.87.1-x86_64-unknown-linux-gnu.zip
sudo mv qsv* /usr/local/bin
rm qsv-0.87.1-x86_64-unknown-linux-gnu.zip

# Set Locales
export LC_ALL="en_US.UTF-8"
export LC_CTYPE="en_US.UTF-8"
sudo dpkg-reconfigure locales

# if qsv is already installed, be sure to update it to the latest release
sudo qsvdp --update

# install datapusher-plus in the virtual environment
. /usr/lib/ckan/dpplus_venv/bin/activate
pip3 install datapusher-plus

# create an .env file and tune DP+ settings. Tune the uwsgi.ini file as well
sudo mkdir -p /etc/ckan/datapusher-plus
sudo curl https://raw.githubusercontent.com/dathere/datapusher-plus/master/datapusher/dot-env.template -o /etc/ckan/datapusher-plus/.env
sudo curl https://raw.githubusercontent.com/dathere/datapusher-plus/master/deployment/datapusher-uwsgi.ini -o /etc/ckan/datapusher-plus/uwsgi.ini

# Be sure to initialize the database if required. (See Database Setup section below)
# Be sure to the .env file have the right connect strings!

# Create a user to run the web service (if necessary)
sudo addgroup www-data
sudo adduser -G www-data www-data

At this point you can run DataPusher+ with the following command:

/usr/lib/ckan/dpplus_venv/bin/uwsgi --enable-threads -i /etc/ckan/datapusher-plus/uwsgi.ini

You might need to change the uid and guid in the uwsgi.ini file when using a different user.

To deploy it using supervisor:

sudo curl https://raw.githubusercontent.com/dathere/datapusher-plus/master/deployment/datapusher-uwsgi.conf -o /etc/supervisor/conf.d/datapusher-uwsgi.conf
sudo service supervisor restart

Package deployment (WIP)

As Datapusher+ is quite involved as evinced by the above procedure, a containerized package installation will make it far easier not only to deploy DP+ to production, but also to experiment with.

The upcoming DP+ package will also expose additional features and administrative interface to manage not only Datapusher+ jobs, but also to manage the CKAN Datastore.

Configuring

CKAN Configuration

Add datapusher to the plugins in your CKAN configuration file (generally located at /etc/ckan/default/ckan.ini):

ckan.plugins = <other plugins> datapusher

In order to tell CKAN where this webservice is located, the following must be added to the [app:main] section of your CKAN configuration file :

ckan.datapusher.url = http://127.0.0.1:8800/

There are other CKAN configuration options that allow to customize the CKAN - DataPusher integration. Please refer to the DataPusher Settings section in the CKAN documentation for more details.

ℹ️ NOTE: DP+ recognizes some additional TSV and spreadsheet subformats - xlsm and xlsb for Excel Spreadsheets, and tab for TSV files. To process these subformats, set ckan.datapusher.formats as follows in your CKAN.INI file:

ckan.datapusher.formats = csv xls xlsx xlsm xlsb tsv tab application/csv application/vnd.ms-excel application/vnd.openxmlformats-officedocument.spreadsheetml.sheet ods application/vnd.oasis.opendocument.spreadsheet

and add this entry to your CKAN's resource_formats.json file.

["TAB", "Tab Separated Values File", "text/tab-separated-values", []],

DataPusher+ Configuration

The DataPusher+ instance is configured in the .env file located in the working directory of DP+ (/etc/ckan/datapusher-plus when running a production deployment. The root of the datapusher-plus source directory when running a development installation.)

See dot-env.template for a summary of configuration options available.

DataPusher+ Database Setup

DP+ requires a dedicated PostgreSQL account named datapusher to connect to the CKAN Datastore.

To create the datapusher user and give it the required privileges to the datastore_default database:

su - postgres
psql -d datastore_default
CREATE ROLE datapusher LOGIN PASSWORD 'YOURPASSWORD';
GRANT CREATE, CONNECT, TEMPORARY, SUPERUSER ON DATABASE datastore_default TO datapusher;
GRANT SELECT, INSERT, UPDATE, DELETE, TRUNCATE ON ALL TABLES IN SCHEMA public TO datapusher;
\q

DP+ also requires its own job_store database to keep track of all the DP+ jobs. In the original Datapusher, this was a sqlite database by default. Though DP+ can still use a sqlite database, we are discouraging its use.

To setup the datapusher_jobs database and its user:

sudo -u postgres createuser -S -D -R -P datapusher_jobs
sudo -u postgres createdb -O datapusher_jobs datapusher_jobs -E utf-8

Usage

Any file that has one of the supported formats (defined in ckan.datapusher.formats) will be attempted to be loaded into the DataStore.

You can also manually trigger resources to be resubmitted. When editing a resource in CKAN (clicking the "Manage" button on a resource page), a new tab named "DataStore" will appear. This will contain a log of the last attempted upload and a button to retry the upload.

Command line

Run the following command to submit all resources to datapusher, although it will skip files whose hash of the data file has not changed:

ckan -c /etc/ckan/default/ckan.ini datapusher resubmit

On CKAN<=2.8:

paster --plugin=ckan datapusher resubmit -c /etc/ckan/default/ckan.ini

To Resubmit a specific resource, whether or not the hash of the data file has changed::

ckan -c /etc/ckan/default/ckan.ini datapusher submit {dataset_id}

On CKAN<=2.8:

paster --plugin=ckan datapusher submit <pkgname> -c /etc/ckan/default/ckan.ini

License

This material is copyright (c) 2020 Open Knowledge Foundation and other contributors

It is open and licensed under the GNU Affero General Public License (AGPL) v3.0 whose full text may be found at:

http://www.fsf.org/licensing/licenses/agpl-3.0.html