disquip-bot 1.1.7

An easy-to-use Discord soundboard bot. BYO audio files and quip away!

An easy-to-use Discord soundboard bot. BYO audio files and quip away!

Introduction

The purpose of the DisQuip Bot project is to provide a simple sound board bot that is easy to install, configure, and run. After installation, simply create a directory structure with your own quips (audio files) and run the bot! Then, head on over to your favorite Discord server, and punch in commands like !aoe3 11 and the bot will play the corresponding quip for you into your voice channel.

Head on over to Contents to get started.

Backstory

I found myself wishing I could easily play taunts from the Age of Empires video games while playing other games with my friends. So, I built out a prototype that went by the name of “AOE Taunt Board.” It was a hit, so I figured I’d make a publicly distributable version for you, the reader!

Contents

1. Introduction

   1. Backstory

2. Installation

   1. Preliminaries

   2. Prerequisites

   3. Install FFmpeg and Other Prerequisite Packages

   4. Configure Python Virtual Environment and Install DisQuip Bot

3. Audio Files

   1. Where Can I Find Audio Files?

4. Discord Configuration

   1. Create a Discord Application

   2. Add the Bot to Servers

5. Configuration

   1. API Token

   2. Aliases

6. Run the Bot

7. Using the Bot

   1. Help

8. Hosting the DisQuip Bot On a Server

9. Changelog

Installation

Depending on your personal level of computer literacy, installation takes ~10-60 minutes.

Preliminaries

Please follow the directions below before moving forward.

1. Create a new directory called disquip-bot in your home directory. On Windows, that’s typically C:\Users\<youruser>\disquip-bot. To keep these directions simple, this directory will be referred to as ~/disquip-bot going forward.

2. Download disquip.ini and place it in ~/disquip-bot. Later, in Configuration we’ll be modifying this file.

3. Create a new directory called audio_files underneath ~/disquip-bot. This is where we’ll be placing our quips later on (Audio Files).

Prerequisites

TL;DR:

• Python >= 3.6

• FFmpeg

• (For Linux, Mac should be similar): libff-dev, libnacl-dev, python-dev

• (For Windows only): 7zip

• (For Windows only, OPTIONAL): Notepad++

DisQuip Bot should be operating system agnostic, but to date has only been tested on Windows (I know, gross.) and Linux (specifically, on a Debian-like distribution).

DisQuip Bot is a Python program and thus requires that you install Python. Specifically, ensure you are running a version of Python >= 3.6. Before going any further take a moment to download Python and then install it.

For Windows users: later we’ll be downloaded a compressed .7z archive that we’ll need to extract. For extraction, we’ll use 7zip. Please download and install.

Install FFmpeg and Other Prerequisite Packages

Refer to the FFmpeg website and/or discord.py’s installation instructions if the directions here are inadequate.

Mac

Sorry, I don’t have a Mac. Feel free to send me a pull request with Mac directions!

Linux (Debian)

apt-get update
apt-get install ffmpeg libffi-dev libnacl-dev python3-dev

Windows

Fortunately, helpful folks like Gyan Doshi exist and provide pre-built FFmpeg distributions. Installing is as simple as:

1. Download the appropriate build from gyan.dev. I’ve successfully used the git-essentials FFmpeg build. You can find other builds at FFmpeg or build it yourself from source code.

2. Extract the downloaded .7z archive to ~/disquip-bot/ffmpeg using 7zip. For me, that looks like:

   1. Navigate to the Downloads folder (Typically C:\Users\<your user>\Downloads

   2. Right click the downloaded .7z file (it’ll be named like ffmpeg-2020-10-11-git-7ea4bcff7b-essentials_build.7z)

   3. Hover over 7-zip, and selecting Extract files....

   4. In the pop-up:

      • Change Extract to: entry to ~/disquip-bot/ffmpeg, replacing ~ with your full file system path.

      • Uncheck the checkbox directly below the Extract to box.

      • Check the Eliminate duplication of root folder box.

      • Click OK.

After following the directions above, you should have one sub-folder in ~/disquip-bot/ffmpeg named something like ffmpeg-2020-10-11-git-7ea4bcff7b-essentials_build. Within that sub-folder should be directories called bin, doc, and presets. There will also be a pair of files called LICENSE and README.

Later on in Configuration, you’ll need the full file system path to ffmpeg.exe in the bin directory.

Configure Python Virtual Environment and Install DisQuip Bot

After you’ve installed Python, we’ll be configuring what’s known as a virtual environment to install Python dependencies as well as the DisQuip Bot. Here are directions for Windows (similar on Mac/Linux):

1. Start a Command Prompt (shortcut: Win + R keys, type cmd, hit Enter key).

2. Change directories to your ~/disquip-bot directory using the cd command. This should work: cd %USERPROFILE%\disquip-bot.

3. Run the command py -3 -m venv venv to create a virtual environment directory called venv in ~/disquip-bot. If you have multiple versions of Python 3.x installed, you can specify py -3.8, for example.

4. Activate the virtual environment by running the command venv\Scripts\activate.bat. Your command line should now be prefixed with “(venv)”.

5. Python installs packages with a tool called pip. Update it by running: python -m pip install --upgrade pip.

6. Install the DisQuip Bot and its dependencies by running python -m pip install disquip-bot.

Audio Files

As mentioned in the second sentence of this document, this project is a “bring your own audio files” project. If you’ve followed the directions, you should have a directory called audio_files in your ~/disquip-bot directory. Within that audio_files directory there must be subdirectories that contain audio files. An example structure might look like:

-- audio_files:
------ AgeOfEmpires1
---------- 01 Yes.mp3
---------- 02 No.mp3
------ MontyPython
---------- I fart in your general direction.wav
---------- Bleed on me.wav
---------- Weirdo.wav

How this structure is set up has meaning. To explain via example, assuming commands are prefixed with an exclamation mark (!):

There will be two available commands, !AgeOfEmpires1 and !MontyPython (case insensitive). You can define Aliases for shorter names. The !AgeOfEmpires1 command can accept 1 of 2 possible arguments, “1,” or “2”. A quip command would look like !AgeOfEmpires1 2, which would stream “02 No.mp3” into your current voice channel.

Similarly, the !MontyPython command can accept 1 of 3 arguments, “1,” “2,” or “3.” The files are sorted alphanumerically, so !MontyPython 1 would stream Bleed on me.wav into your current audio channel.

It’s worth noting that the names of the audio files, excluding their file extensions (e.g., .mp3), will be used in creating Help messages. So, the more descriptive, the better!

Where Can I Find Audio Files?

The internet is full of audio files that are available to you for no cost. For example, myinstants.com has all sorts of files. You can also easily make your own using your PC’s microphone. Also, FFmpeg is a very powerful tool that you could use to create clips. Want nearly 1,000 community-sourced quips from 1998? Head on over to Age of Empires Heaven.

If you love Age Of Empires here are a few suggestions:

• Age of Empires 2 on Steam: I found the taunts in C:\Program Files (x86)\Steam\steamapps\common\Age2HD\resources\en\sound\taunt.

• Age of Empires 3 on Steam: I found the taunts in C:\Program Files (x86)\Steam\steamapps\common\Age Of Empires 3\bin\Sound\taunts

• Age of Empires 1: A tad more work, and the gain is rather minimal. If you’re dedicated, read on:

  • Subscribe to the “Age of Empires 1 Taunt Pack” on the Steam Workshop.

  • The mod will download automatically in Steam.

  • Check the logs at C:\Program Files (x86)\Steam\steamapps\common\Age2HD\Logs\2020.10.03-0839.59 (the ultimate file name will of course be different).

  • You should find a Mod text file. Open it up.

  • Find where the mod was installed. For me it was at C:\Program Files (x86)\Steam\steamapps\workshop\content\221380\927865693.

  • Go there, and dig in: C:\Program Files (x86)\Steam\steamapps\workshop\content\221380\137168612\resources\en\sound\taunt.

  • Copy the taunt files to your Age of Empires directory. Perhaps aoe1 to keep it short?

Discord Configuration

It took me more time than I had hoped to figure this out, so hopefully these directions save you some time. We need to Create a Discord Application and then Add the Bot to Servers.

Create a Discord Application

1. For starters, you of course need to have a Discord account.

2. Navigate to the Discord applications site.

3. Click on New Application

4. OPTIONAL: If you’d like, add a custom icon in the APP ICON area. Perhaps a snip-and-sketch of your favorite game?

5. Click on the Bot tab in the left-hand SETTINGS area.

6. Click the Add Bot button.

7. In the pop-up window, click on Yes, do it!.

Don’t close that web browser or tab! Stay right where you are and move on to Add the Bot to Servers.

Add the Bot to Servers

Scroll down to the bottom of the OAuth2 tab for the application you made in Create a Discord Application. In the SCOPES area check the bot box.

The DisQuip bot only needs the following permissions: - TEXT PERMISSIONS: “Send Messages” - VOICE PERMISSIONS: “Connect” and “Speak”

Scroll down to the BOT PERMISSIONS area and click the appropriate boxes corresponding the permissions listed above.

Finally, click on the Copy button in the SCOPES area. Paste the link into a new tab in your web browser. You’ll need to login to Discord. A pop-up will appear and you’ll need to select a server from the ADD BOT TO: drop-down and then click Continue. Click Authorize and then prove you aren’t a robot yourself.

If you’ve followed all the steps in this section, your bot now should have permissions to listen to and send text messages as well as send audio messages into a voice channel.

Don’t close your web browser just yet! Keep that tab open and continue to Configuration.

Configuration

All the necessary configuration parameters for DisQuip Bot are defined in disquip.ini, which you should have downloaded during the Preliminaries. Rather than list every configuration option here, they’re all listed in disquip.ini. Open that file with your favorite text editor (I strongly recommend Notepad++ if you’re using Windows so that you can get syntax highlighting) and update the file according to your installation. Please read the entire file. Don’t forget to hit “save” when you’re done! :)

Here are a couple areas worth discussion explicitly:

API Token

Remember when I asked you to keep your tab open from the Discord applications site? Here’s where you’ll use it. In the Bot tab, find the are where it says TOKEN. Click the Copy button to copy your token to the clipboard. Use the copied value to update the api_token field in disquip.ini. Don’t forget to save the file.

Aliases

It’s nice to have descriptive directory names like “monty_python” or “AgeOfEmpires1” but that can be cumbersome to type for a quick quip. To alleviate this, the DisQuip Bot supports aliases for commands. Check out the [aliases] section of disquip.ini

Run the Bot

After you’ve performed all the installation and configuration steps above, you’re ready to run!

1. Using a command prompt, change directories to ~/disquip-bot: cd %USERPROFILE%\disquip-bot (Windows); cd ~/disquip-bot (Mac/Linux).

2. Activate your virtual environment: venv\Scripts\activate.bat (Windows); source venv/bin/activate (Mac/Linux).

3. Execute the command disquip-bot to fire it up.

When you’re done, simply kill the command window you have running or use Ctrl + C to stop the program.

Updating Configurations or Audio Files

The DisQuip bot does not dynamically detect changes to audio files or configurations. After making a change, simply stop the bot and start it again to pick up any changes.

Using the Bot

The bot will listen to all the text channels of the server(s) you added it to and look for messages that start with the cmd_prefix defined in disquip.ini. This defaults to the exclamation mark (!).

The DisQuip Bot will automagically join the voice channel you’re currently in once it receives a valid command. Note that DisQuip Bot can only be in one voice channel per server at any given time.

Start exploring!

Help

Assuming your command prefix is !, simply type !help into a text channel the bot has access to. It’ll respond with a listing of available commands and some other helpful information.

Hosting the DisQuip Bot On a Server

Rather than running the DisQuip Bot on the same machine you’re using to chat and play games, you may want to host it on a server. This will preserve resources on your local machine and allow the DisQuip Bot to stay online even when you aren’t.

The service directory in this repository has one sample implementation for running the DisQuip Bot as a service on a Raspberry Pi 3 Model B running the Raspbian GNU/Linux 9 (stretch) operating system. The directions there should apply to many different flavors of Linux. If you’d like to get started, check out service/README.rst.

Changelog

1.1.7

• Fix bug in search limiting. D’Oh!

• Ensure backwards compatibility. D’Oh!

• See notes for 1.1.6

1.1.6

• Please use 1.1.7!

• Add configurable maximum number of results for search (introduced in 1.1.5), defaults to 20.

• Drop all support for Docker. You can find directions related to Docker by viewing this repository at v1.1.4. If you can live without the search introduced in 1.1.5, you can still pull the image for 1.1.4:

  docker pull blthayer/disquip-bot:v1.1.4

1.1.5

Adding two methods to filter help:

• Please use 1.1.7!

• A global search command (alias: s)

• Adding the ability to filter help for a given command like !help a1 | pattern

1.1.4

Addressed minor issue with random command when the caller was not in a voice channel.

1.1.3

Fixes a compatibility issue with Python 3.6 that was introduced in v1.1.2.

1.1.2

• New “disconnect” command: https://github.com/blthayer/disquip-bot/issues/13

• Removed nuisance logging if normalized files already existed: https://github.com/blthayer/disquip-bot/issues/16

• Adding automated Docker image builds: https://github.com/blthayer/disquip-bot/issues/14

• Adding cron job example to service: https://github.com/blthayer/disquip-bot/issues/17

1.1.1

Thanks to Will Ross for this one. Major logging improvements throughout the DisQuip Bot.

1.1.0

• Backwards incompatible change: disquip.ini now requires a pre_normalize field in the [disquip] section.

• By default, all audio files will first be pre-normalized to a peak amplitude of 0 dB. This is accomplished using ffmpeg-normalize.

• New random command!.