django-aws-api-gateway-websockets 1.1.0

Created to allow Django projects to be used as a HTTP backend for AWS API Gateway websockets

Django AWS API Gateway Websockets

It is the aim of this project to create a uniform way to record websocket connections, associate the Django user who established the connection and then retrieve that user within each request.

This project is designed to work exclusively with AWS API Gateway.

It is not intended to be a replacement of Django Channels instead this project allows you to add WebSockets support into your project by writing normal HTTP request-response views whilst allowing AWS API Gateway to worry about the WebSocket connection.

This project introduced a new Class-Based-View to handle connections, disconnections, routing, basic security checks and ensuring that the User object is available within every request.

The project will keep track of which users created which WebSockets, which ones are active and will allow you to send messages back down the socket to the client via Boto3.

Please refer to the installation notes and Getting Start Guides.

Security Concerns

IMPORTANT:: In order to work the dispatch method requires the csrf_exempt decorator to be added. This has already been added as a class decorator on the base view but if you overload the dispatch method you will need to add it back to avoid receiving CSRF Token failures.

Python and Django Support

This project supports Python 3.8 to 3.14 and Django 4.2 to 5.1. It may work with older versions of Django but I am not supporting anything below 4.2.

Python/Django	4.2	5.0	5.1
3.8	Y	N	N/A
3.9	Y	N	N/A
3.10	Y	Y	Y
3.11	Y	Y	Y
3.12	Y	Y	Y
3.13	Y	Y	Y
3.14	N	N	Y

• Python 3.11 only works with Django 4.1.3+

Installation

You can install this package from pip using

pip install django-aws-api-gateway-websockets

settings.py

Add django_aws_api_gateway_websockets into INSTALLED_APPS

IMPORTANT

If your site is not already running cross-origin you will need to update some settings and flush the sessions to ensure the primary domain and subdomain will work.

Because the API Gateway will run from a subdomain you need ensure the cookies are set-up to allow subdomains to read them. Assuming your site runs from www.example.com and you wanted to use ws.www.example.com for websockets you would need to set the below CSRF and COOKIE settings (Django 4 examples shown)

# CSRF
CSRF_COOKIE_SAMESITE=Lax
# CSRF_TRUSTED_ORIGINS=www.example.com,ws.www.example.com ## For Django 3*
## For Django 4+
CSRF_TRUSTED_ORIGINS=https://www.example.com,https://ws.www.example.com
CSRF_COOKIE_DOMAIN='.www.example.com'

# Sessions
SESSION_COOKIE_SAMESITE='Lax'
SESSION_COOKIE_NAME='mysessionid'
SESSION_COOKIE_DOMAIN='.www.example.com'

If you wanted to use www.example.com for the main site and ws.example.com for websockets you'd need to use these settings

# CSRF
CSRF_COOKIE_SAMESITE=Lax
CSRF_TRUSTED_ORIGINS=https://www.example.com,https://ws.www.example.com
CSRF_COOKIE_DOMAIN='.example.com'

# Sessions
SESSION_COOKIE_SAMESITE='Lax'
SESSION_COOKIE_NAME='mysessionid'
SESSION_COOKIE_DOMAIN='.example.com'

NOTE: You need to rename the SESSION cookie. In the example I have renamed if from sessionid to mysessionid. This will ensure that any old cookies are ignored.

Flushing Sessions

Because you are changing the session cookie you will also need to flush any cached sessions using python manage.py clearsessions.

Clearing Stale Websocket connections

The websocket connections will become stale over time and some housekeeping is required. To help there is a management command clearWebSocketSessions that can be run to delete the closed connections from the database. Simply run

python manage.py clearWebSocketSessions

I recommend setting this as a scheduled task.

AWS Setup

In order for this package to create the API Gateway, it's routes, integration, custom domain and to publish messages you will need to assign the correct permission to the IAM User/Role following best practices of restrictive permission.

If you are using a EC2/ECS then you should be using an IAM Role otherwise use a user.

This package does not include creating an AWS Certificate as you may already have one. You should create that yourself. If you do not know how then see the Appendix section at the end of this file.

IAM Policy

You'll need to grant the IAM permission to allow this project to create the API Gateway, create the domain mappings and to execute the API to send messages from the server to the client(s).

I'm still reviewing the "minimum required permissions" but this project has been tested with the following IAM policy which you can copy and paste into the JSON editor within the AWS console:

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "DjangoApiGatewayPolicy01",
            "Effect": "Allow",
            "Action": [
                "apigateway:GET",
                "apigateway:PATCH",
                "apigateway:POST",
                "apigateway:PUT",
                "execute-api:*",
                "iam:CreateServiceLinkedRole"
            ],
            "Resource": [
                "arn:aws:apigateway:*::/apis",
                "arn:aws:apigateway:*::/apis/*",
                "arn:aws:apigateway:*::/apis/*/authorizers",
                "arn:aws:apigateway:*::/apis/*/authorizers/*",
                "arn:aws:apigateway:*::/apis/*/cors",
                "arn:aws:apigateway:*::/apis/*/deployments",
                "arn:aws:apigateway:*::/apis/*/deployments/*",
                "arn:aws:apigateway:*::/apis/*/exports/*",
                "arn:aws:apigateway:*::/apis/*/integrations",
                "arn:aws:apigateway:*::/apis/*/integrations/*",
                "arn:aws:apigateway:*::/apis/*/integrations/*/integrationresponses",
                "arn:aws:apigateway:*::/apis/*/integrations/*/integrationresponses/*",
                "arn:aws:apigateway:*::/apis/*/models",
                "arn:aws:apigateway:*::/apis/*/models/*",
                "arn:aws:apigateway:*::/apis/*/models/*/template",
                "arn:aws:apigateway:*::/apis/*/routes",
                "arn:aws:apigateway:*::/apis/*/routes/*",
                "arn:aws:apigateway:*::/apis/*/routes/*/requestparameters/*",
                "arn:aws:apigateway:*::/apis/*/routes/*/routeresponses",
                "arn:aws:apigateway:*::/apis/*/routes/*/routeresponses/*",
                "arn:aws:apigateway:*::/apis/*/stages",
                "arn:aws:apigateway:*::/apis/*/stages/*",
                "arn:aws:apigateway:*::/apis/*/stages/*/accesslogsettings",
                "arn:aws:apigateway:*::/apis/*/stages/*/cache/authorizers",
                "arn:aws:apigateway:*::/apis/*/stages/*/routesettings/*",
                "arn:aws:apigateway:{AWS-REGION-NAME}::/domainnames",
                "arn:aws:apigateway:{AWS-REGION-NAME}::/domainnames/*/apimappings",
                "arn:aws:apigateway:{AWS-REGION-NAME}::/domainnames/*/apimappings/*",
                "arn:aws:execute-api:{AWS-REGION-NAME}:{AWS-ACCOUNT-NUMBER}:*/*/*/*",
                "arn:aws:iam::{AWS-ACCOUNT-NUMBER}:role/aws-service-role/ops.apigateway.amazonaws.com/AWSServiceRoleForAPIGateway"
            ]
        }
    ]
}

You will need to edit the permissio and replace the following:

1. {AWS-REGION-NANE} with the correct AWS region you are using, E.G eu-west-1. If you wish to grant access to all regions then replace this placeholder with an *
2. {AWS-ACCOUNT-NUMBER} with your account number E.G: 123456789101

This policy grants permissions to ensure the API Gateway(s) will be created, the custom domain name mapped to the gateway and that you can send messages from the server to clients. The AWS Service role is required as it's used when you create a custom domain name for API Gateway. If you do this via the console it will create the role for you so we need to ensure the IAM user has the permission in order to replicate this.

Once you have created your API Gateway(s) you may wish to follow AWS best practice and restrict of revoke the permissions to the API Gateway(s) you have created. Because I do not know what you will name your gateway, the permissions above will allow you to add/edit and API gateway on your account.

Getting Started

The core files within this project are:

1. django_aws_api_gateway_websockets.views.WebSocketView - The base class-based view from which you should extend
2. django_aws_api_gateway_websockets.models.ApiGateway - A model for managing the API Gateway. A Django Admin page is included along with custom actions to create the API Gateway and configure a Custom Domain. For those with projects not using Django Admin there are two management commands that perform the same actions.
3. django_aws_api_gateway_websockets.models.WebSocketSession - The websocket session store. Every connection writes to this model which contains a method to send a message to the connection. The QuerySet of the objects model manager has been extended to include a method to send messages to all records included within a queryset.

Django

URLS.py

Edit your urls.py file and add an entry for the URL you wish API Gateway to call. IMPORTANT The slug parameter must be called "route". This will be populated by API Gateway with the route it uses E.G. $connect, $default or $disconnect

E.G.

path("ws/<slug:route>", ExampleWebSocketView.as_view(), name="example_websocket")

Creating the Views

Subclass the WebSocketView and implement methods where the name of the method is the name of the route the API Gateway has been setup to use. There are already methods for $connect and $disconnect you just need to implement a method for default along with any other custom routes you have created. The methods are selected dynamically via the dispatch method with any leading dollar sign being remove.

The methods take the request parameter and only needs to return a response if you wish to return a negative HTTP response such as a HttpResponseBadRequest otherwise there is no need to return anything.

from django_aws_api_gateway_websockets.views import WebSocketView

class ExampleWebSocketView(WebSocketView):
    """Custom Websocket view."""

    def default(self, request, *args, **kwargs) -> JsonResponse:
        """Add the logic you wish to make here when you receive a message.
         create your JSON response that you will handle within the Javascript
         """
        logger.debug(f"body {self.body}")

If you want to send a response to the websocket that made the request then you need to call the send_message() on the WebSocketSession that is being used. See the example below

from django_aws_api_gateway_websockets.views import WebSocketView

class ExampleWebSocketView(WebSocketView):
    """Custom Websocket view."""

    def default(self, request, *args, **kwargs) -> JsonResponse:
        # Do stuff 
        ...        
        
        # Send a message back to the client - i.e unicast
        self.websocket_session.send_message({"key1": "value1", "key2": "value2"})

If you are using the "channels" to group WebSocket connections together for multicasting, that is one-to-many communication then you can use the following example

from django_aws_api_gateway_websockets.models import WebSocketSession
from django_aws_api_gateway_websockets.views import WebSocketView


class ExampleWebSocketView(WebSocketView):
    """Custom Websocket view."""

    def default(self, request, *args, **kwargs) -> JsonResponse:
        # Do stuff 
        ...        
        
        # Multicast a message to ALL CONNECTED clients on the same "channel"
        WebSocketSession.objects.filter(
            channel_name=self.websocket_session.channel_name
        ).send_message({"key": "value})

        # Multicast a message to ALL CONNECTED clients who are with the 
        # channel_nme "my-example-channel"
        WebSocketSession.objects.filter(
            channel_name=my-example-channel
        ).send_message(
            {
                "key": "value
            }
        )

Using the Route Selection Key value to call specific methods

API Gateway works by routing messages based on the "Route Selection Key". This project sets you up with a default route so that you have a catch-all route but the Route Selection Key is preserved and is used by the dispatch method when selecting the method to use to handle the request. This means that you can write individual methods to handle each route individually for cleaner, more testable code.

In the example that follows the default Route Selection Key of action is being used. Assume that two series of sends are made to the WebSocket. The first with the payload: {"action": "test", "value": "hello world"} and the second {"action": "help", "value": "Help Me"}. You can either handle these within the catch-all default method or you can write individual methods for each action

from django_aws_api_gateway_websockets.models import WebSocketSession
from django_aws_api_gateway_websockets.views import WebSocketView


class ExampleWebSocketView(WebSocketView):
    """Custom Websocket view."""

    def test(self, request, *args, **kwargs) -> JsonResponse:
        print(self.body.get("value")
        # Prints "hello world" 

    def help(self, request, *args, **kwargs) -> JsonResponse:
        print(self.body.get("value")
        # Prints "Help Me" 

Remember: The "action" key is the default route_selection_key, if you chose to use a different one when setting up the websocket make sure to update the route_selection_key class property to use the same value

Debugging the View

Sometimes you the view may return a HTTP400 that you wish to debug further. In order to help with this you can pass debug=True into the as_view() method. The class will then call the private method _debug(msg) passing in a string. By default this method will update a list property called debug_log with the message string but you may wish to simply overload the method and call your logger.

E.G.

def _debug(self, msg: str):
    if self.debug:
        logger.debug(msg)

This can help track the issue which may be as simply as sending a message from the client that is missing the route_select_key.

Example of sending a message from the server to the client

To send a message to a specific connection simple load its WebSocketSession record and then call the send_message method passing in a JSON compatible dictionary of the payload you wish to send to the client.

Sending a message to one connection

from django_aws_api_gateway_websockets.models import WebSocketSession

obj = WebSocketSession.objects.get(pk=1)
obj.send_message({"type": "example", "msg": "This is a message"})

Sending a message to ALL active connections associated with the same channel

from django_aws_api_gateway_websockets.models import WebSocketSession

WebSocketSession.objects.filter(channel_name="Chatroom 1").send_message(
    {"msg": "This is a a sample message"}
)

The WebSocketSessionQuerySet.send_message method automatically adds a filter of connected=True

Django Admin

Three Django Admin pages will be added to your project under the app Django AWS APIGateway WebSockets. Those pages allow you to view and manage the three base models.

Creating an API Gateway Endpoint

Important This section assumes that you are using an IAM account with the permissions listed earlier.

Using the Django Admin page create a new API Gateway record using the following for reference:

1. API Name - The human friendly API Name
2. API Description - Optional
3. Default channel name - Fill this in if you want all connections to this Websocket to also be associated with the same "channel" otherwise leave it blank. "Channels" are groups of web socket connections and nothing more.
4. Target base Endpoint - This is the full URL path to the view you wish to use to handle the requests excluding the route slug portion that will be automatically appended.
5. Certificate ARN - You'll need to manually create certificate within AWS. Once you have, copy the ARN into this field
6. Hosted Zone ID - If you use Route53 then you'll need to enter the Hosted Zone ID here if you wish to use a custom domain name with the API Gateway Endpoint
7. API Key Selection Expression - In most cases leave this as the default value. See the AWS docs for more
8. Route selection expression - As per the above. This is the field that maps the "action" key within the payload as being the key to determine the route to take. If you change this then you must overload the route_selection_key of the view
9. Route key - This is the default root key. In most cases you will not need to change this.
10. Stage Name - The name you wish to give to the staging. Currently this package does not support multiple stages. If you leave it blank it will default to "production"
11. **Stage description" - Optional
12. Tags - Currently not implement but these will be used to create the tags with AWS
13. API ID - This will be populated when the API is created.
14. API Endpoint - This will be populated when the API is created.
15. API Gateway Domain Name - This will be populated when you run the Custom Domain setup. The value that appears here is the value to which you should your DNS CNAME entry should point.
16. API Mapping ID - This will be populated when the API is created.

Once you have created the record within the database simply select it from the Django Admin list view, choose Create API Gateway action from the actions list and click Go. The API Gateway record will be created within your account. When it's ready the "API Created" column will show as True.

Once the API has been created you can now add a custom domain name mapping by choosing the row again and this time selecting the Create Custom Domain record for the API. This will create the Custom Domain record and will associate it with the stage name you entered earlier. Once it's completed the Custom Domain Created flag will be set as True.

At this point you can open the record where you'll find that the API Gateway Domain Name has been populated.

Django Management Commands

If you are not using Django Admin then you can populate the apigateway database table manually using the same list as shown above.

Once you've populated those fields you can then run the two actions as management commands rather than via Django Admin.

python manage.py createApiGateway --pk=1

python manage.py createCustomDomain --pk=1

The same actions will run as above.

Adding Additional Routes

This project will route all requests to one URL by default however that is not always what you will need, sometimes you will want to route requests to different URLs to send requests to different views potentially within different apps. API Gateway support this by using "integrations" and "routes" that use unique "route keys" to identify requests and then route those requests to a URL.

To support this approach this project uses the ApiGatewayAdditionalRoute model entries to map a route key to a chosen URL. They are available to manage as inline forms on the main ApiGateway admin or as their own admin page.

The models are set-up to auto-deploy the new route if the ApiGateway has already been deployed. If it has not been deployed already then these routes will be setup during the main deployment.

From the client side you choose the route you wish to take by setting the value of the action to the route key you wish to match.

Gotchas and debugging

Failure to connect to websockets

Differing required headers

The most common reasons for the websocket failing to connect is due to different required headers. The base view is set-up with two lists of expected headers. required_headers and additional_required_headers. If you are deploying to an EC2 server then you shouldn't have to change these but if you are deploying else where or are testing locally you may find that you need to change some of these. During development of this library I was using an NGROK network edge tunnel and found that the "X-Real-Ip" and "Connection" headers were being lost during which is why they were moved to the additional_required_headers. If you find this is the case for you then simply overload the class property and set it to an empty list.

Client Side Integration (Javascript)

This section will guide you through two common ways of connecting to and using this project from a webpage.

Basic Integration

Below is a very basic integration using the WebSockets API built into browsers. It does not handle reconnecting dropped websockets, see the next section for that.

WARNING: This method will create a WebSocket that will timeout after around 10 minutes.

The below example assumes you created the API Gateway to work on the custom domain name ws.example.com

let wss_url = 'wss://ws.example.com';
let regDeskWSocket = new WebSocket(wss_url);
regDeskWSocket.onmessage = function(event) {
    // Take your action here to handle messages being received
    console.log(event);
    let msg = JSON.parse(event.data);
    console.log(msg);
};

You can set the channel by using the channel querystring parameter during the connection

let wss_url = 'wss://ws.example.com?channel=my+example+channel';
let exampleWS = new WebSocket(wss_url);
exampleWS.onmessage = function(event) {
    // Take your action here to handle messages being received
    console.log(event);
    let msg = JSON.parse(event.data);
    console.log(msg);
};

Reconnecting WebSockets

Websockets can disconnect due top a variety of reasons to work around this here are some links to libraries of proposed solutions

1. Stack Overflow- WebSocket: How to automatically reconnect after it dies
2. JS library - reconnecting-websocket

The below example is using the JS library. Note you just include the lib and then use the ReconnectingWebSocket class rather than WebSocket:

<script src="https://cdnjs.cloudflare.com/ajax/libs/reconnecting-websocket/1.0.0/reconnecting-websocket.min.js" integrity="sha512-B4skI5FiLurS86aioJx9VfozI1wjqrn6aTdJH+YQUmCZum/ZibPBTX55k5d9XM6EsKePDInkLVrN7vPmJxc1qA==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
<script>
let wss_url = 'wss://ws.example.com';
let exampleWS = new ReconnectingWebSocket(wss_url);
exampleWS.onmessage = function(event) {
    // Take your action here to handle messages being received
    console.log(event);
    let msg = JSON.parse(event.data);
    console.log(msg);
};
</script>

Sending a message from the client to the server

Both the example above use the same method.

let wss_url = 'wss://ws.example.com?channel=my+example+channel';
let exampleWS = new WebSocket(wss_url);  // Or use ReconnectingWebSocket it does not matter

// Send a message
exampleWS.send(JSON.stringify({"action": "custom", "message": "What is this"}))

IMPORTANT The value of action determines the route that is used by API Gateway. By default, the only routes that are set-up are $connect, $disconnect and default. Any messages sent to unknown routes on the API Gateway are delivered to the default route. So if you created a custom route called bob and then sent the following message from the client:

exampleWS.send(JSON.stringify({"action": "bob", "message": "What is this"}))

API Gateway will route this to the endpoint set for the "bob" route. This will be calling your view with the route slugs value being assigned to bob. The dispatch method of the view will then look for a method on the class called bob. If one is found then it will be invoked otherwise the default method will be called.

Appendix

Creating an SSL Certificate within AWS Certificate Manager

Please refer to the official AWS documentation

Found a Bug?

Issues are tracked via GitHub issues at the project issue page

Have A Feature Request?

Feature requests can be raised by creating an issue within the project issue page, but please create the issue with "Feature Request -" at the start of the issue

Testing

To run the tests use

coverage erase && \
python -W error::DeprecationWarning -W error::PendingDeprecationWarning -m coverage run --parallel -m pytest --ds tests.settings && \
coverage combine && \
coverage report

Compiling Requirements

Run pip install pip-tools then run python requirements/compile.py to generate the various requirements files. I use two local VIRTUALENVS to build the requirements, one running Python3.8 and the other running Python 3.11.

Also require pytest-django for testing

tox

Contributing

• Check for open issues at the project issue page or open a new issue to start a discussion about a feature or bug.
• Fork the repository on GitHub to start making changes.
• Clone the repository
• Initialise pre-commit by running pre-commit install
• Install requirements from one of the requirement files depending on the versions of Python and Django you wish to use.
• Add a test case to show that the bug is fixed or the feature is implemented correctly.
• Test using python -W error::DeprecationWarning -W error::PendingDeprecationWarning -m coverage run --parallel -m pytest --ds tests.settings
• Create a pull request, tagging the issue, bug me until I can merge your pull request. Also, don't forget to add yourself to AUTHORS.