doc-ufcn 0.1.9rc2

Doc-UFCN

Doc-UFCN

This Python 3 library contains a public implementation of Doc-UFCN, a fully convolutional network presented in the paper Multiple Document Datasets Pre-training Improves Text Line Detection With Deep Neural Networks. This library has been developed by the original authors from Teklia.

The model is designed to run various Document Layout Analysis (DLA) tasks like the text line detection or page segmentation.

This library can be used to train a model, fine-tune a model or directly apply a trained Doc-UFCN model to document images.

Getting started

To use Doc-UFCN in your own scripts, install it using pip:

pip install doc-ufcn

Model inference

With only a few lines of code, the trained model is loaded, applied to an image and the detected objects along with some visualizations are obtained.

Usage

To apply Doc-UFCN to an image, one need to first add a few imports (optionally, set the logging config to make logs appear on stdout) and to load an image. Note that the image should be in RGB.

import cv2
import logging
import sys
from doc_ufcn.main import DocUFCN

logging.basicConfig(
    format="[%(levelname)s] %(message)s",
    stream=sys.stdout,
    level=logging.INFO
)

image = cv2.cvtColor(cv2.imread(IMAGE_PATH), cv2.COLOR_BGR2RGB)

Then one can initialize and load a trained model with the parameters used during training. The number of classes should include the background that must have been put as the first channel during training. By default, the model is loaded in evaluation mode. To load it in training mode, use mode="train".

nb_of_classes = 2
mean = [0, 0, 0]
std = [1, 1, 1]
input_size = 768
model_path = "trained_model.pth"

model = DocUFCN(nb_of_classes, input_size, 'cpu')
model.load(model_path, mean, std, mode="eval")

To run the inference on a GPU, one can replace cpu by the name of the GPU. In the end, one can run the prediction:

detected_polygons = model.predict(image)

Output

When running inference on an image, the detected objects are returned as in the following example. The objects belonging to a class (except for the background class) are returned as a list containing the confidence score and the polygon coordinates of each object.

{
  1: [
    {
      'confidence': 0.99,
      'polygon': [(490, 140), (490, 1596), (2866, 1598), (2870, 140)]
    }
    ...
  ],
  ...
}

In addition, one can directly retrieve the raw probabilities output by the model using model.predict(image, raw_output=True). A tensor of size (nb_of_classes, height, width) is then returned along with the polygons and can be used for further processing.

Lastly, two visualizations can be returned by the model:

• A mask of the detected objects, using mask_output=True parameter;
• An overlap of the detected objects on the input image, using overlap_output=True parameter.

By default, only the detected polygons are returned, to return the four outputs, one can use:

detected_polygons, probabilities, mask, overlap = model.predict(
    image, raw_output=True, mask_output=True, overlap_output=True
)

Models

We provide various open-source models, stored on HuggingFace and every model prefixed by doc-ufcn- is supported. For example, to download our generic page detection model and load it, one can use:

from doc_ufcn import models
from doc_ufcn.main import DocUFCN

model_path, parameters = models.download_model('generic-page')

model = DocUFCN(len(parameters['classes']), parameters['input_size'], 'cpu')
model.load(model_path, parameters['mean'], parameters['std'])

By default, the most recent version of the model will be downloaded. One can also use a specific version using the following line:

model_path, parameters = models.download_model('generic-page', version="main")

Training

The Doc-UFCN tool is split into three parts:

• The code to train the model on given datasets;
• The code to predict the segmentation of images according to the trained model;
• The code to evaluate the model based on the predictions.

A csv configuration file allows to run a batch of experiments at once and also to train, predict or evaluate on combined datasets by only specifying the paths to the datasets folders.

Preparing the environment

First of all, one needs an environment to run the three experiments presented before. Create a new environment and install the needed packages:

pip install doc-ufcn[training]

Preparing the data

To train and test the model, all the images and their annotations of a dataset should be in a folder following this hierarchy:

.
├── dataset_name
│   ├── test
│   │   ├── images
│   │   └── labels_json
│   ├── train
│   │   ├── images
│   │   ├── labels
│   │   └── labels_json
│   └── val
│       ├── images
│       ├── labels
│       └── labels_json
├── ...

The labels should be generated directly at the network input size (img_size) to avoid resizing (that can cause mergings of regions). In addition, the evaluation is run over json files containing the original polygons coordinates that should be in the labels_json folders.

Preparing the configuration files

experiments_config.json

Different files must be updated according to the task one want to run. Since we can run multiple experiments at once, the first configuration file experiments_config.json allows to specify the common parameters to use for all the experiments:

Parameter	Description	Default value
classes_names	List with the names of the classes / must be in the same order as the colors defined in classes_colors field	["background", "text_line"]
classes_colors	List with the color codes of the classes	[[0, 0, 0]], [0, 0, 255]]
img_size	Network input size / must be the same as the one used during the label generation	768
no_of_epochs	Number of epochs to train the models	200
batch_size	Size of batchs to use during training	None
no_of_params	Maximum number of parameters supported by the CPU/GPU	None
bin_size	Size between two groups of images.	20
min_cc	Threshold to use when removing of small connected components	50
save_image	List with the sets ["train", "val", "test"] for which we want to save the predicted masks	["val", "test"]
use_amp	Whether to use Automatic Mixed Precision during training	false

The background class must always be defined at the first position in the classes_names and classes_colors fields.

Automatic Mixed Precision allows to speed up the training while using less memory (possibility to increase the batch size). Either the batch size or the number of parameters should be defined.

experiments.csv

In the root directory, one has to create an experiments.csv file (see example_experiments.csv). It contains the experiments names as well as the paths to the datasets and parameters used to continue a training or to fine-tune a model.

Parameter	Description	Default value / example
experiment_name	Name of the experiment
steps	List of steps to run ["normalization_params", "train", "prediction", "evaluation"]	normalization_params;train;prediction;evaluation
train	Paths to the training datasets	path_to_dataset1;path_to_dataset_2
val	Paths to the validation datasets	path_to_dataset1;path_to_dataset_2
test	Paths to the evaluation datasets	path_to_dataset1;path_to_dataset_2
restore_model	Name of a saved model to resume or fine-tune a training
same_classes	Whether the classes of the current experiment are the same as those of the model to resume	True
loss	Whether to use an initial loss (initial) or the best (best) saved loss of the restored model	initial

Note: All the steps are dependent, e.g to run the "prediction" step, one needs the results of the "normalization_params" and "train" steps.

Example

The example_experiments.csv file shows an example on how to build the experiments csv file.

experiment_name	steps	train	val	test	restore_model	same_classes	loss
exp1	normalization_params;train;prediction;evaluation	~/data/DLA/dataset1;~/data/dataset2	~/data/DLA/dataset1;~/data/dataset2	~/data/DLA/dataset3;~/data/dataset2
exp1	prediction;evaluation			~/data/DLA/dataset4
exp1	train;prediction;evaluation	~/data/DLA/dataset4	~/data/DLA/dataset4	~/data/DLA/dataset4	last_model.pth		initial
exp2	normalization_params;train;prediction;evaluation	~/data/DLA/dataset5	~/data/DLA/dataset5	~/data/DLA/dataset5

The first line will start a standard training on two datasets (dataset1 and dataset2) and will be tested also on two datasets (dataset2 and dataset3).

The second line will use the model trained during the first experiment (same experiment_name) and only test it on another dataset (dataset4).

The third line will also use the first trained model (same experiment_name) but will fine-tune it on dataset4. restore_model indicates which model to fine-tune and loss indicates that the loss should be initialized (datasets used to fine-tune are not the same as the one used for first training).

The last line will run a standard new training on dataset5.

Start an experiment

To start the experiment:

$ ./run_dla_experiment.sh -c experiments.csv

There's a way to be notified in slack when training has finished (successfully or not):

• Create a webhook here https://my.slack.com/services/new/incoming-webhook/;
• Save the webhook key into ~/.notify-slack-cfg (looks like: T02TKKSAX/B246MJ6HX/WXt2BWPfNhSKxdoFNFblczW9)
• Make sure that the notifier is working:

python tools/notify-slack.py "WARN: notifier works"

• The slack notification is used by default;
• To start the experiment without this slack notification run:

$ ./run_dla_experiment.sh -c experiments.csv -s false

Follow a training

Tensorboard

One can see the training progress using Tensorboard. In a new terminal:

$ tensorboard --logdir ./runs/experiment_name

The model and the useful file for visualization are stored in ./runs/experiment_name.

MLflow

MLflow logging is also available in Doc-UFCN. Information about the instance and the experiment need to be specified in the configuration file experiments_config.json, under the key mlflow.

# experiments_config.json
{
  ...
  "mlflow": {
    "experiment_id": ...,
    "run_name": null,
    "tracking_uri": ...,
    "s3_endpoint_url": ...,
    "aws_access_key_id": ...,
    "aws_secret_access_key": ...
  }
}

• experiment_id: ID of the MLflow experiment where the run will be recorded,
• run_name: Optional name of the created run,
• tracking_uri: URL towards the MLflow instance, see MLFLOW_TRACKING_URI,
• s3_endpoint_url: URL towards the MLflow instance's storage, see MLFLOW_S3_ENDPOINT_URL,
• aws_access_key_id and aws_secret_access_key: AWS credentials if the storage is Amazon S3 or Amazon S3-compatible. Only needed when logging artifacts.

Result of an experiment

The logs of an experiment are saved in DLA_train.log file.

Once a model has been trained, it can be found in ./runs/experiment_name/model.pth.

The predictions are in ./runs/experiment_name/predictions.

The evaluation results are in ./runs/experiment_name/results.

Resume a training

To resume a training, just by adding epochs for example, one just has to:

• Remove the "normalization_params" step;
• Indicate the name of the model to resume in restore_model parameter;
• Set the value of the loss at "best".

Model fine-tuning

Several models are available on HuggingFace for inference but they can also be used as pre-trained weights. It is then possible to fine-tune them on a new task and/or new data.

For this, it is necessary to follow the same data preparation steps as above, as well as the specification of the configuration files. To fine-tune a model, one needs to:

• Remove the "normalization_params" step;
• Indicate the name of the model to resume in restore_model parameter. If the name contains a .pth extension, the corresponding local file will be retrieved. Otherwise, to retrieve a model from HuggingFace, one just needs to put the name of the model starting with doc-ufcn-;
• Set the value of the loss at "initial";
• Set the same_classes parameter to False if the classes used for training the new model are different from the classes used during the pre-training.

Once these parameters have been updated, the training can be started and followed as described above.

HuggingFace app

You may easily create and deploy a web application to demo the prediction of your Doc-UFCN models. This application can be integrated in a HuggingFace space.

To use HuggingFace app, it is necessary to install gradio using pip:

pip install gradio

The code was last tested with gradio==3.18.0.

An example is available in the huggingface/ folder. You need to create a JSON configuration file with the following parameters:

Parameter	Description	Default value
model_name	Name of the model	doc-ufcn-generic-historical-line
classes_colors	List with the colors of the classes	["green"]
title	Title of the app	Required
description	Description of the app	Required
examples	Paths towards the image examples.	Required

A ready-to-use configuration file is available in huggingface/config.json. You may update it to your needs.

Once the configuration file is ready, just run the following command:

$ python3 hugging_face/app.py --config hugging_face/config.json

If the --public argument is specified, the script will generate a public, shareable link that you can send to anyone. More information about public links on gradio is available in the gradio documentation.

To generate the shareable link, use the following command:

$ python3 hugging_face/app.py --config hugging_face/config.json --public

Cite us!

If you want to cite us in one of your works, please use the following citation.

@inproceedings{boillet2020,
    author = {Boillet, Mélodie and Kermorvant, Christopher and Paquet, Thierry},
    title = {{Multiple Document Datasets Pre-training Improves Text Line Detection With
              Deep Neural Networks}},
    booktitle = {2020 25th International Conference on Pattern Recognition (ICPR)},
    year = {2021},
    month = Jan,
    pages = {2134-2141},
    doi = {10.1109/ICPR48806.2021.9412447}
}

License

This library is under the 3-Clause BSD License.