Skip to main content

Save your dotfiles once, deploy them everywhere

Project description

DOTDROP

Build Status License: GPL v3 Coverage Status PyPI version AUR Python

Save your dotfiles once, deploy them everywhere

Dotdrop makes the management of dotfiles between different hosts easy. It allows to store your dotfiles on git and automagically deploy different versions of the same file on different setups.

It also allows to manage different sets of dotfiles. For example you can have a set of dotfiles for your home laptop and a different set for your office desktop. Those sets may overlap and different versions of the same dotfiles can be deployed on different predefined profiles. Or you may have a main set of dotfiles for your everyday’s host and a sub-set you only need to deploy to temporary hosts (cloud VM, etc) that may be using a slightly different version of some of the dotfiles.

Features:

  • Sync once every dotfile on git for different usages

  • Allow dotfiles templating by leveraging jinja2

  • Comparison between local and stored dotfiles

  • Handling multiple profiles with different sets of dotfiles

  • Easy import dotfiles

  • Handle files and directories

  • Allow to symlink dotfiles

  • Associate an action to the deployment of specific dotfiles

  • Associate transformations that allow to store encrypted dotfiles

  • Provide different solutions for handling dotfiles containing sensitive information

Check also the blog post, the example or how people are using dotdrop for more.

Quick start:

mkdir dotfiles && cd dotfiles
git init
git submodule add https://github.com/deadc0de6/dotdrop.git
sudo pip3 install -r dotdrop/requirements.txt
./dotdrop/bootstrap.sh
./dotdrop.sh --help

A mirror of this repository is available on gitlab under https://gitlab.com/deadc0de6/dotdrop.

Why dotdrop ?

There exist many tools to manage dotfiles however not many allow to deploy different versions of the same dotfile on different hosts. Moreover dotdrop allows to specify the set of dotfiles that need to be deployed on a specific profile.

See the example for a concrete example on why dotdrop rocks.


Table of Contents

Installation

There are two ways of installing and using dotdrop, either as a submodule to your dotfiles git tree or system-wide with pypi.

Having dotdrop as a submodule guarantees that anywhere your are cloning your dotfiles git tree from you’ll have dotdrop shipped with it. It is the recommended way.

If you want to keep your python environment clean, use the virtualenv installation instructions (see As a submodule in a virtualenv and With pypi in a virtualenv). In that case, the virtualenv environment must be loaded before any attempt to use dotdrop.

Dotdrop is also available on aur: * stable: https://aur.archlinux.org/packages/dotdrop/ * git version: https://aur.archlinux.org/packages/dotdrop-git/

As a submodule

The following will create a git repository for your dotfiles and keep dotdrop as a submodule:

$ mkdir dotfiles; cd dotfiles
$ git init
$ git submodule add https://github.com/deadc0de6/dotdrop.git
$ sudo pip3 install -r dotdrop/requirements.txt
$ ./dotdrop/bootstrap.sh
$ ./dotdrop.sh --help

For MacOS users, make sure to install realpath through homebrew (part of coreutils).

Using this solution will need you to work with dotdrop by using the generated script dotdrop.sh at the root of your dotfiles repository.

To ease the use of dotdrop, it is recommended to add an alias to it in your shell with the config file path, for example

alias dotdrop=<absolute-path-to-dotdrop.sh> --cfg=<path-to-your-config.yaml>'

Finally import your dotfiles as described below.

As a submodule in a virtualenv

To install in a virtualenv:

$ mkdir dotfiles; cd dotfiles
$ git init
$ git submodule add https://github.com/deadc0de6/dotdrop.git
$ virtualenv -p python3 env
$ echo 'env' > .gitignore
$ source env/bin/activate
$ pip install -r dotdrop/requirements.txt
$ ./dotdrop/bootstrap.sh
$ ./dotdrop.sh --help

When using a virtualenv, make sure to source the environment before using dotdrop

$ source env/bin/activate
$ ./dotdrop.sh --help

Then follow the instructions under As a submodule.

With pypi

Start by installing dotdrop

$ sudo pip3 install dotdrop

And then create a repository for your dotfiles

$ mkdir dotfiles; cd dotfiles
$ git init

Replace any call to dotdrop.sh in the documentation below by dotdrop if using the pypi solution.

To ease the use of dotdrop, it is recommended to add an alias to it in your shell with the config file path, for example

alias dotdrop='dotdrop --cfg=<path-to-your-config.yaml>'

Finally import your dotfiles as described below.

With pypi in a virtualenv

Install dotdrop in a virtualenv from pypi

$ virtualenv -p python3 env
$ source env/bin/activate
$ pip install dotdrop

When using a virtualenv, make sure to source the environment before using dotdrop:

$ source env/bin/activate
$ dotdrop --help

Then follow the instructions under With pypi.

Usage

If starting fresh, the import command of dotdrop allows to easily and quickly get a running setup.

Install dotdrop on one of your host and then import any dotfiles you want dotdrop to manage (be it a file or a directory):

$ dotdrop.sh import ~/.vimrc ~/.xinitrc

Dotdrop does two things:

  • Copy the dotfiles in the dotfiles directory

  • Create the entries in the config.yaml file

Commit and push your changes.

Then go to another host where your dotfiles need to be managed as well, clone the previously setup git tree and compare local dotfiles with the ones stored by dotdrop:

$ dotdrop.sh list
$ dotdrop.sh compare --profile=<other-host-profile>

Then adapt any dotfile using the template feature (if needed) and set a new profile for the current host by simply adding lines in the config files, for example:

...
profiles:
  host1:
    dotfiles:
    - f_vimrc
    - f_xinitrc
  host2:
    dotfiles:
    - f_vimrc
...

When done, you can install your dotfiles using

$ dotdrop.sh install

That’s it, a single repository with all your dotfiles for your different hosts.

For more options see dotdrop.sh --help.

For easy deployment the default profile used by dotdrop reflects the hostname of the host on which it runs. It can be changed either with the --profile switch or by defining the DOTDROP_PROFILE environment variable.

Install dotfiles

Simply run

$ dotdrop.sh install

Compare dotfiles

Compare local dotfiles with dotdrop’s defined ones:

$ dotdrop.sh compare

The diffing is done by diff in the backend, one can provide specific options to diff using the -o switch.

It is also possible to install all dotfiles for a specific profile in a temporary directory in order to manually compare them with the local version by using install and the -t switch.

Import dotfiles

Dotdrop allows to import dotfiles directly from the filesystem. It will copy the dotfile and update the config file automatically.

For example to import ~/.xinitrc

$ dotdrop.sh import ~/.xinitrc

You can control how the dotfile key is generated in the config file with the option longkey (per default to false).

Two formats are available:

  • short format (default): take the shortest unique path

  • long format: take the full path

For example ~/.config/awesome/rc.lua gives

  • f_rc.lua in the short format

  • f_config_awesome_rc.lua in the long format

Importing ~/.mutt/colors and ~/.vim/colors will result in

  • d_colors and d_vim_colors in the short format

  • d_mutt_colors and d_vim_colors in the long format

List profiles

$ dotdrop.sh list

Dotdrop allows to choose which profile to use with the --profile switch if you use something else than the default (the hostname).

The default profile can also be changed by defining the DOTDROP_PROFILE environment variable.

List dotfiles

The following command lists the different dotfiles configured for a specific profile:

$ dotdrop.sh listfiles --profile=<some-profile>

For example:

Dotfile(s) for profile "some-profile":

f_vimrc (file: "vimrc", link: False)
    -> ~/.vimrc
f_dunstrc (file: "config/dunst/dunstrc", link: False)
    -> ~/.config/dunst/dunstrc

Use actions

It is sometimes useful to execute some kind of action when deploying a dotfile. For example let’s consider Vundle is used to manage vim’s plugins, the following action could be set to update and install the plugins when vimrc is deployed:

actions:
  vundle: vim +VundleClean! +VundleInstall +VundleInstall! +qall
config:
  backup: true
  create: true
  dotpath: dotfiles
dotfiles:
  f_vimrc:
    dst: ~/.vimrc
    src: vimrc
    actions:
      - vundle
profiles:
  home:
    dotfiles:
    - f_vimrc

Thus when f_vimrc is installed, the command vim +VundleClean! +VundleInstall +VundleInstall! +qall will be executed.

Sometimes, you may even want to execute some action prior to deploying a dotfile. Let’s take another example with vim-plug:

actions:
  pre:
    vim-plug-install: test -e ~/.vim/autoload/plug.vim || (mkdir -p ~/.vim/autoload; curl
      -fLo ~/.vim/autoload/plug.vim https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim)
  vim-plug: vim +PlugInstall +qall
config:
  backup: true
  create: true
  dotpath: dotfiles
dotfiles:
  f_vimrc:
    dst: ~/.vimrc
    src: vimrc
    actions:
       - vim-plug-install
       - vim-plug
profiles:
  home:
    dotfiles:
    - f_vimrc

This way, we make sure vim-plug is installed prior to deploying the ~/.vimrc dotfile.

Note that pre actions are always executed even if the dotfile is not installed.

You can also define post actions like this:

actions:
  post:
    some-action: echo "Hello, World!" >/tmp/log

If you don’t specify neither post nor pre, the action will be executed after the dotfile deployment (which is equivalent to post). Actions cannot obviously be named pre or post.

Use transformations

Transformations are used to transform a dotfile before it is installed. These are executed before the dotfile is installed to transform the source.

Transformation commands have two arguments:

  • {0} will be replaced with the dotfile to process

  • {1} will be replaced with a temporary file to store the result of the transformation

A typical use-case for transformations is when the dotfile needs to be stored encrypted.

Here’s an example of part of a config file to use gpg encrypted dotfiles:

dotfiles:
  f_secret:
    dst: ~/.secret
    src: secret
    trans:
      - gpg
trans:
  gpg: gpg2 -q --for-your-eyes-only --no-tty -d {0} > {1}

The above config allows to store the dotfile ~/.secret encrypted in the dotfiles directory and uses gpg to decrypt it when install is run.

Here’s how to deploy the above solution:

  • import the clear dotfile (creates the correct entries in the config file)

$ dotdrop.sh import ~/.secret
  • encrypt the original dotfile

$ <some-gpg-command> ~/.secret
  • overwrite the dotfile with the encrypted version

$ cp <encrypted-version-of-secret> dotfiles/secret
  • edit the config file and add the transformation to the dotfile (as shown in the example above)

  • commit and push the changes

Note that transformations cannot be used if the dotfiles is to be linked (link: true). Also compare won’t work on dotfiles using transformations.

Update dotdrop

If used as a submodule, update it with

$ git submodule foreach git pull origin master
$ git add dotdrop
$ git commit -m 'update dotdrop'
$ git push

Through pypi:

$ sudo pip3 install dotdrop --upgrade

Update dotfiles

Dotfiles managed by dotdrop can be updated using the update command.

There are two cases:

The dotfile doesn’t usetemplating

The new version of the dotfile is copied to the dotfiles directory and overwrites the old version. If git is used to version the dotfiles stored by dotdrop, the git command diff can be used to view the changes.

$ dotdrop.sh update ~/.vimrc
$ git diff

The dotfile usestemplating

The dotfile must be manually updated, two solutions can be used to identify the changes to apply to the template:

  • Use dotdrop’s compare command

# use compare to identify change(s)
$ ./dotdrop.sh compare --files=~/.vimrc
  • Install the dotfiles to a temporary directory (using the install command and the -t switch) and compare the generated dotfile with the local one.

# use install to identify change(s)
$ ./dotdrop.sh install -t
Installed to tmp /tmp/dotdrop-6ajz7565
$ diff ~/.vimrc /tmp/dotdrop-6ajz7565/home/user/.vimrc

Store sensitive dotfiles

Two solutions exist, the first one using an unversioned file (see Environment variables) and the second using transformations (see Transformations).

Config

The config file (defaults to config.yaml) is a yaml file containing the following entries:

  • config entry: contains settings for the deployment

    • backup: create a backup of the dotfile in case it differs from the one that will be installed by dotdrop (default true)

    • create: create directory hierarchy when installing dotfiles if it doesn’t exist (default true)

    • dotpath: path to the directory containing the dotfiles to be managed by dotdrop (absolute path or relative to the config file location)

    • banner: display the banner (default true)

    • longkey: use long keys for dotfiles when importing (default false)

    • keepdot: preserve leading dot when importing hidden file in the dotpath (default false)

    • link_by_default: when importing a dotfile set link to that value per default (default false)

    • workdir: directory where templates are installed before being symlink when using link (default ~/.config/dotdrop)

  • dotfiles entry: a list of dotfiles

    • When link is true, dotdrop will create a symlink instead of copying (default false).

    • actions contains a list of action keys that need to be defined in the actions entry below.

    • trans contains a list of transformation keys that need to be defined in the trans entry below.

    <dotfile-key-name>:
      dst: <where-this-file-is-deployed>
      src: <filename-within-the-dotpath>
      # Optional
      link: <true|false>
      actions:
        - <action-key>
      trans:
        - <transformation-key>
  • profiles entry: a list of profiles with the different dotfiles that need to be managed

    • dotfiles: the dotfiles associated to this profile

    • include: include all dotfiles from another profile (optional)

<some-name-usually-the-hostname>:
  dotfiles:
  - <some-dotfile-key-name-defined-above>
  - <some-other-dotfile-key-name>
  - ...
  # Optional
  include:
  - <some-other-profile>
  - ...
  • actions entry (optional): a list of action (see Use actions)

<action-key>: <command-to-execute>
<trans-key>: <command-to-execute>
<variable-name>: <variable-content>

All dotfiles for a profile

To use all defined dotfiles for a profile, simply use the keyword ALL.

For example:

dotfiles:
  f_xinitrc:
    dst: ~/.xinitrc
    src: xinitrc
  f_vimrc:
    dst: ~/.vimrc
    src: vimrc
profiles:
  host1:
    dotfiles:
    - ALL
  host2:
    dotfiles:
    - f_vimrc

Include dotfiles from another profile

If one profile is using the entire set of another profile, one can use the include entry to avoid redundancy.

For example:

profiles:
  host1:
      dotfiles:
        - f_xinitrc
      include:
        - host2
  host2:
      dotfiles:
        - f_vimrc

Here profile host1 contains all the dotfiles defined for host2 plus f_xinitrc.

Templating

Dotdrop leverage the power of jinja2 to handle the templating of dotfiles. See jinja2 template doc or the example section for more information on how to template your dotfiles.

Note that dotdrop uses different delimiters than jinja2’s defaults:

  • block start = {%@@

  • block end = @@%}

  • variable start = {{@@

  • variable end = @@}}

  • comment start = {#@@

  • comment end = @@#}

Available variables

  • {{@@ profile @@}} contains the profile provided to dotdrop.

  • {{@@ env['MY_VAR'] @@}} contains environment variables (see Environment variables).

  • {{@@ header() @@}} insert dotdrop header (see Dotdrop header).

Addionally to the above, variables can be added in the config file under the variables entry. The variables added there are directly reachable in any templates.

For example in the config file:

variables:
  var1: some variable content

These can then be used in any template with

{{@@ var1 @@}}

Dotdrop header

Dotdrop is able to insert a header in the generated dotfiles. This allows to remind anyone opening the file for editing that this file is managed by dotdrop.

Here’s what it looks like:

This dotfile is managed using dotdrop

The header can be automatically added using jinja2 directive:

{{@@ header() @@}}

Properly commenting the header in templates is the responsability of the user as jinja2 has no way of knowing what is the proper char(s) used for comments.

Either prepend the directive with the commenting char(s) used in the dotfile (for example # {{@@ header() @@}}) or provide it as an argument {{@@ header('# ') @@}}. The result is equivalent.

Environment variables

It’s possible to access environment variables inside the templates.

{{@@ env['MY_VAR'] @@}}

This allows for storing host-specific properties and/or secrets in environment variables. It is recommended to use variables (see Available variables instead of environment variables unless these contain sensitive information that shouldn’t be versioned in git.

For example you can have a .env file in the directory where your config.yaml lies:

## Some secrets
pass="verysecurepassword"

If this file contains secrets that should not be tracked by git, put it in your .gitignore.

You can then invoke dotdrop with the help of an alias

# when dotdrop is installed as a submodule
alias dotdrop='eval $(grep -v "^#" ~/dotfiles/.env) ~/dotfiles/dotdrop.sh'

# when dotdrop is installed from pypi or aur
alias dotdrop='eval $(grep -v "^#" ~/dotfiles/.env) /usr/bin/dotdrop --cfg=~/dotfiles/config.yaml'

The above aliases load all the variables from ~/dotfiles/.env (while omitting lines starting with #) before calling dotdrop.

Debug template

To debug the result of a template, one can install the dotfiles to a temporary directory with the install command and the -t switch:

$ ./dotdrop.sh install -t
Installed to tmp /tmp/dotdrop-6ajz7565

Example

Let’s consider two hosts:

  • home: home computer with hostname home

  • office: office computer with hostname office

The home computer is running awesomeWM and the office computer bspwm. The .xinitrc file will therefore be different while still sharing some lines. Dotdrop allows to store only one single .xinitrc but to deploy different versions depending on where it is run from.

The following file is the dotfile stored in dotdrop containing jinja2 directives for the deployment based on the profile used.

Dotfile <dotpath>/xinitrc:

#!/bin/bash

# load Xresources
userresources=$HOME/.Xresources
if [ -f "$userresources" ]; then
      xrdb -merge "$userresources" &
fi

# launch the wm
{%@@ if profile == "home" @@%}
exec awesome
{%@@ elif profile == "office" @@%}
exec bspwm
{%@@ endif @@%}

The if branch will define which part is deployed based on the hostname of the host on which dotdrop is run from.

And here’s how the config file looks like with this setup. Of course any combination of the dotfiles (different sets) can be done if more dotfiles have to be deployed.

config.yaml file:

config:
  backup: true
  create: true
  dotpath: dotfiles
dotfiles:
  f_xinitrc:
    dst: ~/.xinitrc
    src: xinitrc
profiles:
  home:
    dotfiles:
    - f_xinitrc
  office:
    dotfiles:
    - f_xinitrc

Installing the dotfiles (the --profile switch is not needed if the hostname matches the profile entry in the config file):

# on home computer
$ dotdrop.sh install --profile=home

# on office computer
$ dotdrop.sh install --profile=office

Comparing the dotfiles:

# on home computer
$ dotdrop.sh compare

# on office computer
$ dotdrop.sh compare

User tricks

See the related wiki page

People using dotdrop

For more examples, see how people are using dotdrop

Contribution

If you are having trouble installing or using dotdrop, open an issue.

If you want to contribute, feel free to do a PR (please follow PEP8).

License

This project is licensed under the terms of the GPLv3 license.

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

dotdrop-0.20.1.tar.gz (48.7 kB view hashes)

Uploaded Source

Built Distribution

dotdrop-0.20.1-py3-none-any.whl (39.9 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page