dymoprint 1.1.1

Linux Software to print with LabelManager PnP from Dymo

dymoprint

Linux Software to print with LabelManager PnP from Dymo

• First version from Sebastian Bronner: https://sbronner.com/dymoprint.html
• Cloned by computerlyrik to: https://github.com/computerlyrik/dymoprint
• Forked by Ben Mares on 2020-10-05 to: https://github.com/maresb/dymoprint
• Pull request sent to computerlyrik on 2020-10-05 with update and offering PyPI ownership.
• After no response, assumed that computerlyrik's fork is abandoned, continuing development from fork on 2021-03-22.

Features

• Works on python 2.7 and 3.5 to 3.8
• Supports text printing
• Supports qr code printing
• Supports barcode printing
• Supports image printing
• Supports combined barcode / qrcode and text printing

Installation & Configuration

Dependent packages

From this directory,

pip install .

or for development,

pip install --editable .

Add the --user flag to install in userspace.

For ubuntu based distributions:

(should also work for debian, but not tested yet) use udev and modeswitch configurations to work with the LabelManager PNP. modeswitch changes the mode (and USB Id) from mass storage device to printer device.

sudo cp 91-dymo-labelmanager-pnp.rules /etc/udev/rules.d/
sudo cp dymo-labelmanager-pnp.conf /etc/usb_modeswitch.d/    

and restart services with:

sudo systemctl restart udev.service

Finally, physically disconnect and reconnect the LabelManager PnP.

(more info)

For arch based distributions:

(should also work for manjaro, but not tested yet) use udev and modeswitch configurations to work with the LabelManager PNP. modeswitch changes the mode (and USB Id) from mass storage device to printer device.

Install usb_modeswitch at first:

sudo pacman -S usb_modeswitch

if the /etc/usb_modeswitch.d/ folder was not created at installation do:

sudo mkdir /etc/usb_modeswitch.d/

now copy the udev and usb_modswitch configs:

sudo cp 91-dymo-labelmanager-pnp.rules /etc/udev/rules.d/
sudo cp dymo-labelmanager-pnp.conf /etc/usb_modeswitch.d/    

and restart services with:

sudo udevadm control --reload

you might need to change the permissions of the hid device (dymoprint will tell if it is the case):

sudo chown your_user:users /dev/hidraw0 

Finally, physically disconnect and reconnect the LabelManager PnP.

(more info)

Font management

Fonts are managed via dymoprint.ini. This should be placed in your config folder (normally ~/.config). An example file is provided here.

You may choose any TTF Font you like

You may edit the file to point to your favorite font.

For my Arch-Linux System, fonts are located at e.g.

/usr/share/fonts/TTF/DejaVuSerif.ttf

It is also possible to Download a font from http://font.ubuntu.com/ and use it.

Modes

Print text

./dymoprint MyText

Multilines will be generated on whitespace

./dymoprint MyLine MySecondLine # Will print two Lines

If you want whitespaces just enclose in " "

./dymoprint "prints a single line"

Print QRCodes and Barcodes

./dymoprint --help

Print Codes and Text

just add a text after your qr or barcode text

./dymoprint -qr "QR Content" "Cleartext printed"

Picture printing

Any picture with JPEG standard may be printed. Beware it will be downsized to tape.

./dymoprint -p mypic.jpg ""

Take care of the trailing "" - you may enter text here which gets printed in front of the image

Development

Besides the travis-ci one should run the following command on a feature implemention or change to ensure the same outcome on a real device:

./dymoprint Tst && \
./dymoprint -qr Tst && \
./dymoprint -c code128 Tst && \
./dymoprint -qr qrencoded "qr_txt" && \
./dymoprint -c code128 Test "bc_txt"

ToDo

• (?)support multiple ProductIDs (1001, 1002) -> use usb-modeswitch?
• put everything in classes that would need to be used by a GUI
• for more options use command line parser framework
• allow selection of font with command line options
• allow font size specification with command line option (points, pixels?)
• provide an option to show a preview of what the label will look like
• read and write a .dymoprint file containing user preferences
• print barcodes
• print graphics
• plot frame around label
• vertical print