epiclient 0.1.2

dce client for epipearl

===============================
epiclient
===============================

DCE client for `epipearl
<https://github.com/harvard-dce/epipearl>`_

epiclient wraps `epipearl <https://github.com/harvard-dce/epipearl>`_
HTTP API and web ui calls. epiclient creates channels and recorders and
configures them, as well as general configurations for an epiphan-pearl
device. There is also configurations for the epiphan-pearl to work as an
`Opencast Matterhorn <http://opencast.org/matterhorn>`_ Capture Agent,
and these require a custom firmware from DCE that includes `mhpearl
<https://bitbucket.org/hudcede/mhpearl>`_

This software should be considered alpha, therefore likely to change/break in
the near future.



*******************************************************
Install
*******************************************************

.. code-block:: bash

pip install epiclient


*******************************************************
Overview
*******************************************************

To configure an epiphan-pearl device to work as a Capture Agent, there are
general configs (like ntp server, touchscreen, permanent logs), and channels
and recorders that need to be created and proper configured.

epiclient has a CLI that goes through the configuration steps:

* clear channels
* set source deinterlacing
* config ntp server
* config touchscreen settings
* enable permanent logs
* create and config DCE standard channels
* create and config DCE standard recorders
* config mhpearl

Other than the CLI, epiclient is a python module that wraps `epipearl
<https://github.com/harvard-dce/epipearl>`_
calls to an epiphan-pearl in a
DCE-tailored way. Learn how you can use it by checking
section Testing_.



*******************************************************
epiclient CLI
*******************************************************

To check how to use epiclient CLI, after Install_:

.. code-block:: bash

epiclient --help
Usage: epiclient [OPTIONS] DEVICE_NAME

Console script for epiclient

Options:
--step
[validate|clear_channels|config_deinterlacing|create_channels|config_layout|config_encodings|config_recorder_channels|config_recorder_settings|config_live|config_general|config_mhpearl]
when absent, execute all steps
--verbose / --quiet
--help Show this message and exit.


The CLI requires some environment variables to be defined in a file
named ${HOME}/.epiclient.env.

Check an example in `epiclient/example.env`.

.. code-block:: bash

# edit example.env
cat epiclient/example.env
# ca status board url, user/pwd
CA_STATS_URL=http://ca-status.dceapp.net/ca_stats/ca_stats.json
CA_STATS_USER=user
CA_STATS_PASSWD=password

# user/pwd for the epiphan-pearl being configured
EPIPEARL_USER=user
EPIPEARL_PASSWD=password

# digest user/pwd for opencast cluster epiphan-pearl points to
MH_DIGEST_USER=user
MH_DIGEST_PASSWD=password

# akamai user/pwd (live streaming)
RTMP_USER=user
RTPM_PASSWD=password

# s3 bucket that hosts ca json settings
CA_SETTINGS_BUCKET=capture-agent-settings

# set as ${HOME}/.epiclient.env
cp epiclient/example.env ${HOME}/.epiclient.env

The CLI also needs AWS credentials configuration; check `aws configuration
<https://boto3.readthedocs.io/en/latest/guide/quickstart.html#configuration>`_

The CLI takes a device name as input, for example, `dev-epiphan006`. Each
device has a json config that follows a json-schema specified in
``epiclient/json_schema/role_settings_schema.json``. An example of what a json
input look like can be found in ``tests/json/primary_sample_ca_settings.json``.

These json configs are pulled from s3, and the bucket name can be configured in
the .epiclient.env file as `CA_SETTINGS_BUCKET`.



Steps
=======================================================

Some steps are required in specific order (e.g: ``config_recorder_channels``
after ``create_channels``), but in general the steps are independent.

Note that, if you ``create_channels``, the channel IDs change and the json
input is updated in s3.

Also, when you ``create_channels``, it does not check if there is already a
channel with the same name. That's why there is a ``clear_channels`` command:
make sure no previous DCE channels exist and prevent creating many
channels with the same name. This is to guarantee the defaults are set or unset
as expected.

validate
-------------------------------------------------------

This step always runs to check that the json input conforms to the json-schema
spec'd in ``epiphan/json_schema/role_settings_schema.json``.


clear_channels
-------------------------------------------------------

As said, to make sure that there won't be channels or recorders with the same
name, clear all channels first. This operation removes channels named after DCE
(*dce_pr*, *dce_pn*, *dce_prpn*, *dce_live*, *dce_live_lowbr*).

Only ``create_channels`` step works after running this operation because all
subsequent steps assume the channels are created


config_deinterlacing
-------------------------------------------------------

Source signals are usually set to be deinterlaced.

This step is independent.


create_channels
-------------------------------------------------------

Creates the DCE channels and recorders, and names them as mentioned before
*dce_pr*, *dce_pn*, *dce_prpn*, *dce_live*, *dce_live_lowbr*.

As mentioned, this step updates the s3 json config.


config_layout
-------------------------------------------------------

Configures the source layout for each channel. Note that the live channels
have the presenter and presentation combined, thus a different framesize than
presenter-only or presentation-only.

This step depends on ``create_channels``.


config_encodings
-------------------------------------------------------

Basic settings for encodings in each channel.

This step depends on ``create_channels``.


config_recorder_channels
-------------------------------------------------------

The recorder, *dce_prpn*, is the channel that is recorded as a media file and
then ingested into `Opencast Matterhorn <http://opencast.org/matterhorn>`_.
This step configures which channels are to be combined and saved into file
(*dce_pr* and *dce_pn*).

This step depends on ``create_channels``.


config_recorder_settings
-------------------------------------------------------

Configures the max size of recorded media files: per duration or file size.

This step depends on ``create_channels``.


config_live
-------------------------------------------------------

Sets the server to which live stream a channel.

This step depends on ``create_channels``.


config_general
-------------------------------------------------------

Here, the ntp server, the touchscreen settings, and the permanent log are
enabled.

This step is independent.


config_mhpearl
-------------------------------------------------------

This operation configures settings for
`mhpearl <https://bitbucket.org/hudcede/mhpearl>`_.

This step is independent.


ommit --step option
-------------------------------------------------------

When the `--step` option is absent, all steps are run and you should have a
configured capture agent at the end of the process. The CLI logs steps as they
are done so you have an idea of what's going on.


epiclient JSON Input
=======================================================

Here is an example of json input with comments for clarification. As mentioned,
these configs are stored in a s3 bucket.

.. code-block:: json

{
# name of capture agent that identifies it; only alpha-num and
# underscores allowed
"ca_name_id": "my_dev_epiphan",

# capture agent url for web ui; hostname preferred instead of IP
"ca_url": "http://epiphan.pearl.url",

# capture card id is specific to each device, if not present,
# epiclient queries the device and saves this info generating a new json
"ca_capture_card_id": "D12345678",

# similar to capture card id; epiclient queries device if not present
"ca_serial_number": "ED123456",

# valid values 'primary' or 'secondary'
# currently, 'experimental' devices are not automatically configurable
"role": "primary",

# opencast cluster name this capture agent must point to
"cluster_name_id": "cluster-name",

# if the opencast cluster is a dev, stage or prod cluster
"cluster_env": "dev",

# opencast admin node url, to pull scheduling from
"mh_admin_url": "http://cluster.dev.url.edu",

# firmware version, for now it's not mandatory
"firmware_version": "epiphan_firmware_version",

# mhpearl version, for now it's not mandatory
"mhpearl_version": "some_version",

# mhpearl settings file_search_range in secs
"mhpearl_file_search_range": 58,

# mhpearl settings update_frequency in secs
"mhpearl_update_frequency": 123,

# mhpearl settings, which ca_name pull scheduling of
"mh_ca_name": "my-dev-epiphan",

# classroom id; only alpha_num and underscores allowed
"location_name_id": "lab",

# presenter connector available in the classroom this device
# is installed
"pr_vconnector": "sdi",
"pr_vinput": "a",

# presentation connector available in the classroom this device
# is installed
"pn_vconnector": "hdmi",
"pn_vinput": "b",

# default for all epiphan-pearls is to have deinterlacing ON
"source_deinterlacing": "on",

"date_and_time": {
# ntp server, ask sysops for correct value
"ntp_server": "0.nz.pool.ntp.org",

# timezone is usually 'US/Eastern'
"timezone": "US/Alaska"
},
"touchscreen": {
# after timeout, touchscreen turns off
"episcreen_timeout": 579
},
"maintenance": {
# default is to have permanent logs ON
"permanent_logs": "on"
},
# these are common encoding settings for all channels
"channel_encodings": {
"autoframesize": "",
"codec": "h.264",
"vprofile": "100",
"vencpreset": "5",
"vkeyframeinterval": 1,
"fpslimit": 30,
"audio": "on",
"audiochannels": "1",
"audiopreset": "libfaac;44100"
},
"channels": {
"dce_pr": {
# this value, ``channel_id``, changes when creating a new
# channel; epiclient will update this value and save it in a
# new json file, backing up the previous json with a timestamp
"channel_id": "1",
"encodings": {
"framesize": "1280x720",
"vbitrate": 9000,
"audiobitrate": 160
}
},
"dce_pn": {
"channel_id": "2",
"encodings": {
"framesize": "1920x1080",
"vbitrate": 9000,
"audiobitrate": 160
}
},
"dce_live": {
"channel_id": "3",
"encodings": {
"framesize": "1920x1080",
"vbitrate": 4000,
"audiobitrate": 96
},

# akamai streaming entry point
# note that this differ for primary and secondary CAs
"rtmp_url": "rtmp://p.blobblob.i.streamingservice.org/EntryPoint",
"stream_name": "my-dev-epiphan"
},
"dce_live_lowbr": {
"channel_id": "4",
"encodings": {
"framesize": "960x270",
"vbitrate": 250,
"audiobitrate": 64
},

# akamai streaming entry point
# note that this differ for primary and secondary CAs
# this value is the same as **dce_live**
"rtmp_url": "rtmp://p.blobblob.i.streamingservice.org/EntryPoint",
"stream_name": "my-dev-epiphan"
}
},
"recorders": {
"dce_prpn": {

# this value, ``recorder_id``, changes when creating a new
# recorder; epiclient will update this value and save it in a
# new json file, backing up the previous json with a timestamp
"recorder_id": "1",
"timelimit": 360,
"sizelimit": 64000000,
"output_format": "avi"
}
}
}





*******************************************************
Testing
*******************************************************

During development, epiclient tests were executed using
`pytest <http://pytest.org/latest/>`_

To run tests from a local clone:

.. code-block:: bash

pip install -r requirements_dev.txt
py.test tests

# to run live tests
export EPI_URL=http//epiphan_pearl_address
export EPI_USER=admin_user
export EPI_PASSWD=password
py.test tests --runlive

Live tests will connect with the actual device at the given ``EPI_URL`` and
change its settings! You might have to tweak
``tests/json/primary_sample_ca_settings.json`` for that to work.


*******************************************************
License
*******************************************************

epiclient is licensed under the `Apache License, Version 2.0
<http://ww.apache.org/licenses/LICENSE-2.0>`_.


*******************************************************
Copyright
*******************************************************

2016~2017 President and Fellows of Harvard College



.. _epipearl: https://github.com/harvard-dce/epipearl
.. _`Opencast Matterhorn`: http://opencast.org/matterhorn
.. _mhpearl: https://bitbucket.org/hudcede/mhpearl
.. _pytest: http://pytest.org/latest/
.. _`Apache License, Version 2.0`: http://www.apache.org/licenses/LICENSE-2.0


=======
History
=======


0.1.2 (2016-08-02)
------------------

* Fix static files into package


0.1.1 (2016-08-02)
------------------

* Fix release version


0.1.0 (2016-06-21)
------------------

* First release on PyPI.