ez-port-forward 0.1.2

Create DNAT port forwarding rules from easy-to-read YAML files.

ez_port_forwarding

Create DNAT port forwarding rules from easy-to-read YAML files.

Are you tired of always having to look up the iptables command every couple of months to change a single port forwarding on your proxmox/hypervisor because a friend asks you to make a new container for that very popular game?

Here is the solution:
A YAML powered port forwarding tool, that does all that for you. YOu simply need to change numbers in the very readable and easy to undersand config file. The script produces 100% valid iptables commands.

Has shortcut notation for multiple ports and ssh ports, and can do different input and output ports.
Checks port collisions and validity.

Installation:

pip install ez_port_forward

Installs a command ez-port-forward or ezpf.

Usage:

• ez-port-forward:
  Looks in current dir for a file named port_config.yaml and writes results to /etc/network/interfaces.d/port_forwards.
  WILL REPLACE FILE WITHOUR ASKING!

• ez-port-forward /path/to/my/port_config.yaml:
  Uses given input file and writes results to /etc/network/interfaces.d/port_forwards.
  WILL REPLACE FILE WITHOUR ASKING!

• ez-port-forward -o /target/path/port_forwards:
  Looks in current dir for a file named port_config.yaml and writes results to given file.
  WILL REPLACE FILE WITHOUR ASKING!

• ez-port-forward /path/to/my/port_config.yaml -o /target/path/port_forwards:
  Uses given input file and writes results to given file.
  WILL REPLACE FILE WITHOUR ASKING!

Same usage for ezpf command.

Requirements:

Python >= 3.6
PyYAML

Make sure your /etc/network/interfaces config contains the line source /etc/network/interfaces.d/*.

Tested on Proxmox.

Example:

# the name of the bridge
vmbr0:
    # the interface the bridge is connected to
    bridge: eno1
    # the iprange of your subnet you want to make port forwards in
    # container ID are used as last octet for the ip
    subnet: 10.0.0.0/24
    # this section contains all the forwarding magic
    forwards: 
    # this forwards to the container with id 101 and ip 10.0.0.101
        101:
            # forwards external port 10122 to internal port 22
            ssh: true
            # forwards multiple external ports to identical internal ports for tcp udp and both
            tcp: 123,345,567
            udp: 888,999
            tcpudp: 111,222
        102: 
            # maps external ports 321,345,765 to internal ports 123,345,567
            tcp: 
                321: 123
                345: 345 # will notice this port collision with 101 and mark the line in the output as comment
                765: 567
        201: # this is equivalent to below
            ssh:
        202:
            tcp:
                20222: 22
        233:
            # use port 23 for ssh shorthand, forwards 23323 to 23
            ssh: 23 

Result:

iface vmbr0 inet static
#--- Container 101
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 10122 -j DNAT --to 10.0.0.101:22
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 123 -j DNAT --to 10.0.0.101:123
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 345 -j DNAT --to 10.0.0.101:345
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 567 -j DNAT --to 10.0.0.101:567
        post-up iptables -t nat -A PREROUTING -i eno1 -p udp --dport 888 -j DNAT --to 10.0.0.101:888
        post-up iptables -t nat -A PREROUTING -i eno1 -p udp --dport 999 -j DNAT --to 10.0.0.101:999
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 111 -j DNAT --to 10.0.0.101:111
        post-up iptables -t nat -A PREROUTING -i eno1 -p udp --dport 111 -j DNAT --to 10.0.0.101:111
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 222 -j DNAT --to 10.0.0.101:222
        post-up iptables -t nat -A PREROUTING -i eno1 -p udp --dport 222 -j DNAT --to 10.0.0.101:222
#---
#--- Container 102
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 321 -j DNAT --to 10.0.0.102:123
#        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 345 -j DNAT --to 10.0.0.102:345
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 765 -j DNAT --to 10.0.0.102:567
#---
#--- Container 201
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 20122 -j DNAT --to 10.0.0.201:22
#---
#--- Container 202
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 20222 -j DNAT --to 10.0.0.202:22
#---
#--- Container 233
        post-up iptables -t nat -A PREROUTING -i eno1 -p tcp --dport 23323 -j DNAT --to 10.0.0.233:23
#---