flake8-pantsbuild 2.0.0

Various Flake8 lints used by the Pants project and its users.

flake8-pantsbuild

This Flake8 plugin provides several custom lints used by the Pants project and its users.

Table of Contents

• Installation
  • Supported Python versions
• Usage
• Error Codes
• Migrating from lint.pythonstyle to flake8
  • Differences between the tools
  • Steps to migrate
  • Alternatives to custom lints
• Development

Installation

If using with Pants, add this to your pants.toml:

[GLOBAL]
backend_packages2.add = ["pants.backend.python.lint.flake8"]

[flake8]
extra_requirements.add = ["flake8-pantsbuild"]

If using Flake8 without Pants, install with:

$ pip install flake8-pantsbuild

Supported Python versions

This plugin works with Python 3.6+.

If you need support for Python 2.7 or Python 3.5, install flake8-pantsbuild==1.* and refer to the README at https://github.com/pantsbuild/flake8-pantsbuild/blob/1.x/README.md.

Usage

If using with Pants, run ./pants lint file.py as usual.

If using without Pants, run flake8 file.py as usual.

Error Codes

Error code	Description	Notes
PB10	Using class attribute that breaks inheritance
PB11	Using a constant on the left-hand side of a logical operator
PB12	Using a constant on the right-hand side of an and operator
PB13	Using open without a with statement (context manager)
PB20	Check for 2-space indentation	Disabled by default¹
PB30	Using slashes instead of parentheses for line continuation	Disabled by default²

¹ To enable the PB20 indentation lint, set --enable-extensions=PB20. You'll need to disable E111 (check for 4-space indentation) via --extend-ignore=E111. You'll likely want to disable E121, E124, E125, E127, and E128 as well.

² To enable the PB30 trailing slash lint, set --enable-extensions=PB30.

Migrating from lint.pythonstyle to flake8

lint.pythonstyle was a custom Pants task from the pants.contrib.python.checks plugin that behaved like Flake8, but was generally inferior to the more popular Flake8.

Differences between the tools

Pants' lint.pythonstyle task runs pycodestyle and pyflakes, in addition to providing several custom lints.

In contrast, Flake8 runs pycodestyle and pyflakes, but it also uses mccabe to check for complex sections of code and it adds its own lints. Flake8 does not have any of the custom lint.pythonstyle lints by default, but the below table shows how to keep any of these lints you'd like.

Flake8 has hundreds of plugins that you may easily add to Pants. See Awesome Flake8 Extensions for a curated list of plugins.

Steps to migrate

First, follow the installation instructions to hook up Flake8 with Pants. Then, disable lint.pythonstyle by removing pants.contrib.python.checks from your pants.toml.

Then, run Flake8 by running ./pants lint file.py (see Usage).

The first time you run ./pants lint , you will likely have several errors due to its differences with lint.pythonstyle. We recommend starting by disabling those errors in a .flake8 config file. Add this to your pants.toml to ensure Pants uses the config:

[flake8]
config = "path/to/.flake8"

If you want to keep any of the custom lints from lint.pythonstyle, refer to the below table. You will need to install additional plugins by adding this to your pants.toml:

[flake8]
extra_requirements.add = [
  "flake8-pantsbuild",
  "pep8-naming",
  "flake8-import-order",
  # and so on...
]

Alternatives to custom lints

Old code	Old option scope	Description	Alternative
T000	pycheck-variable-names	Class names must be UpperCamelCase	pep8-naming Flake8 plugin
T001	pycheck-variable-names	Class globals must be UPPER_SNAKE_CASED	pep8-naming Flake8 plugin
T002	pycheck-variable-names	Function names must be lower_snake_cased	pep8-naming Flake8 plugin
T100	pycheck-indentation	Enforce 2-space indentation	PB20¹
T200	pycheck-trailing-whitespace	Trailing whitespace	Flake8's W291
T201	pycheck-trailing-whitespace	Using slashes instead of parentheses for line continuation	PB30¹
T301	pycheck-newlines	Excepted 1 blank line between class methods	Flake8's E301 and E303
T302	pycheck-newlines	Excepted 2 blank lines between top level definitions	Flake8's E302 and E303
T400	pycheck-import-order	Wildcard imports not allowed	isort or flake8-import-order plugin ²
T401	pycheck-import-order	from imports not sorted correctly	isort or flake8-import-order plugin ²
T402	pycheck-import-order	import should only import one module at a time	isort or flake8-import-order plugin ²
T403	pycheck-import-order	Importing multiple module types in one statement	isort or flake8-import-order plugin ²
T404	pycheck-import-order	Unclassifiable import	isort or flake8-import-order plugin ²
T405	pycheck-import-order	Import block has multiple module types	isort or flake8-import-order plugin ²
T406	pycheck-import-orde	Out of order import statements	isort or flake8-import-order plugin ²
T601	pycheck-except-statement	Using old style except statements instead of the as keyword	PB61³
T602	pycheck-future-compat	Using iteritems, iterkeys, or itervalues	PB62³
T603	pycheck-future-compat	Using xrange	PB63³
T604	pycheck-future-compat	Using basestring or unicode	PB64³
T605	pycheck-future-compat	Using metaclasses incompatible with Python 3	PB65³
T606	pycheck-new-style-classes	Found Python 2 old-style classes (not inheriting object)	PB66³
T607	pycheck-print-statements	Using print statements, rather than the print function	PB60³
T800	pycheck-class-factoring	Using class attribute that breaks inheritance	PB10
T801	pycheck-variable-names	Shadowing a builtin name	flake8-builtins plugin
T802	pycheck-context-manager	Using open without a with statement (context manager)	PB13
T803	pycheck-except-statement	Using a blanket except:	Flake8's E722
T804	pycheck-constant-logic	Using a constant on the left-hand side of a logical operator	PB11
T805	pycheck-constant-logic	Using a constant on the right-hand side of an and operator	PB12

¹ This lint is disabled by default. See the above section Error Codes for instructions on how to enable this lint.

² To use isort with Pants, set backend_packages2.add = ["pants.backend.python.lint.isort"] in your pants.toml.

³ The PB6* lints are only available in the 1.x release series for this plugin because 2.x drops support for Python 2. Please refer to the README at https://github.com/pantsbuild/flake8-pantsbuild/blob/1.x/README.md#error-codes for instructions on how to use this plugin.

Development

We use tox for test automation. To run the test suite, invoke tox:

$ tox

You may run certain environments with tox -e (run tox -a to see all options):

$ tox -e format-run
$ tox -e typecheck
$ tox -e py36

You may also manually test by building a PEX with this plugin, as follows:

$ pex flake8 . --entry-point flake8 --output-file flake8.pex
$ vim example.py  # add whatever content you want
$ ./flake.pex example.py