Skip to main content

A physical computing framework

Project description

Gadgets provides a way to control physical devices with python on a Beaglebone or a Raspberry PI (Raspberry Pi only has gpio functionality, for now). It provides an easy way to create a system that:

  • Controls devices with the gpio, pwm, adc, and 1-wire interfaces

  • Has an easy to use User Interface

  • Can be distributed across many Beaglebones

  • Uses RCL (Robot Command Language)

  • Can run methods (a sequece of RCL commands)

Gadgets provides several classes that are useful for controlling various devices. They are:

  • Switch

  • Valve

  • Heater

  • Cooler

  • Motor

The simplest one is Switch. Here is an example of how to set up a gadgets system that uses Switch to control multiple devices.

The first thing to do is define the switches you are going to use with a dictionary

>>> from gadgets.pins.beaglebone import pins
>>> from gadgets import get_gadgets
>>> arguments = {
...     "locations": {
...         "living room": {
...             "light": {
...             "type": "switch",
...             "pin": pins["gpio"][8][3]
...             },
...         "back yard": {
...             "sprinklers": {
...             "type": "switch",
...             "pin": pins["gpio"][8][11],
...             },
...         },
...     },
... }
>>> gadgets = get_gadgets(arguments)
>>> gadgets.start()

The above definition assumes you have connected some switch (perhaps a transistor or a relay) to port 8, pin 3 on the Beaglebone, and perhaps a transistor connected to port 8, pin 11. The transistor would then be connected to the solenoid valve that turns on the sprinklers (you will probably not be able to connect the solenoid directly to your Beaglebone because it would draw too much current and probably uses 24V AC).

One way you can turn on the light that you defined above is to open another terminal and start a python prompt.

>>> from gadgets import Sockets
>>> s = Sockets()
>>> s.send("turn on living room light")

The light you have connected to the Beaglebone should now turn on.

>>> s.send("turn off living room light")

This, of course, turns the light off. These two commands are examples of RCL (Robot Command Language).

To turn on the sprinklers in the back yard for 15 minutes, you would send this command:

>>> s.send("turn on back yard sprinklers for 15 minutes")

You can also control the gadgets by using the built in curses based user-interface. See gadgets.ui for more details.

0.0.1, 2/12/2013 - first version

0.0.2, 2/16/2013 -

added a shift register switch

0.1.0, 2/26/2013 -

changed the way thermometer works and how it is configured for get_gadgets

added XBee IO for Switch

0.1.1, 3/6/2013 -

added a momentary option for switch, so that it only turns on for a small amount of time

changed README.md to README.txt so it will show up on pypi

added gadgets.devices.Button. It monitors a gpio input pin and pushes a status update when it changes

0.2.0, 4/23/2013 -

added support for raspberry pi gpio

0.2.1, 4/24/2013 -

fixed the curses user interface

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

gadgets-0.2.1.tar.gz (42.8 kB view hashes)

Uploaded source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page