Simple CLI for Google Home & Mini
Project description
ghome: Simple CLI for Google Home & Mini
This is an application of the google home API Blueprint reported here. While a lot of the end points maybe of interest to quite a few people, I used the ones I use most and I thought would be most useful and created a command line tool for you to search for a Google home mini device and then use this tool to interact with it and perform actions as needed.
Table of contents
Installation
This assumes that you have native python & pip installed in your system, you can test this by going to the terminal (or windows command prompt) and trying
python and then pip list
If you get no errors and you have python 2.7.14 or higher you should be good to go. Please note that I have tested this only on python 2.7.15, but it should run on Python 3.
To install ghome: Simple CLI for Google Home & Mini you can install using two methods.
pip install ghome
or you can also try
git clone https://github.com/samapriya/ghome.git
cd ghome
python setup.py install
For Linux use sudo or try pip install ghome --user.
Installation is an optional step; the application can also be run directly by executing ghome.py script. The advantage of having it installed is that ghome can be executed as any command line tool. I recommend installation within a virtual environment. If you don't want to install, browse into the ghome folder and try python ghome.py to get to the same result.
Getting started
As usual, to print help:
usage: ghome [-h] {list,reboot,alarm,dnd,bstat,bscan,bpair,bdisc,wscan} ...
Simple Google Home Mini Client
positional arguments:
{list,reboot,alarm,dnd,bstat,bscan,bpair,bdisc,wscan}
list Lists all google home mini devices & IP address
reboot Reboot a google home mini using IP address
alarm Print out the current alarms setup on your google home
mini
dnd Enable or disable <Do not Disturb mode> for a google
home mini using IP address
bstat Print current bluetooth status for a google home mini
using IP address
bscan Scan for Bluetooth devices near a google home mini
using IP address
bpair Print current paired bluetooth devices for a google
home mini using IP address
bdisc Enable or disable bluetooth discovery for a google
home mini using IP address
wscan Scan for Wifi networks near a google home mini using
IP address
optional arguments:
-h, --help show this help message and exit
To obtain help for specific functionality, simply call it with help switch, e.g.: ghome wscan -h. If you didn't install ghome, then you can run it just by going to ghome directory and running python ghome.py [arguments go here]
ghome Simple CLI for Earth Engine Uploads
The tool is based on curret unofficial API blueprint published for the device and is subject to change in the future.
list
**This is a key step since it lists all google home mini devices in your wifi, it used nmap to identify said devices. You can avoid this tool by using a third party tool like [Fing] to identify your google home devices.Usage is simply
ghome list
reboot
Just a simple tool to reboot your google home device quickly.
usage: ghome reboot [-h] [--ip IP]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
alarm
This tool will simply list all alarms currently on your device including date , time and time zone.
usage: ghome alarm [-h] [--ip IP]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
do not disturb
Enable or disable do not disturb mode on the Google home mini.
usage: ghome dnd [-h] [--ip IP] [--action ACTION]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
--action ACTION enable|disable do not disturb mode
bluetooth status
The bluetooth status prints whether the device discovery is enabled,whether scanning is enabled and whether it is connected to a device.
usage: ghome bstat [-h] [--ip IP]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
bluetooth scan
This prints bluetooth status, including is possible bluetooth device name and mac name
usage: ghome bstat [-h] [--ip IP]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
bluetooth paired
Check if device is paried via bluetooth to any current device as well as history of all deviced connected, last connected and whether or not they are currently connected.
usage: ghome bpair [-h] [--ip IP]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
bluetooth discovery
This is to enable or disable bluetooth discovery to allow for pairing as needed. The action can be enable or disable coupled with the ip.
usage: ghome bdisc [-h] [--ip IP] [--action ACTION]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
--action ACTION enable|disable bluetooth discovery
wifi scan
Prints the wifi scan results of all available wifi connections and their ssid based on the proximity of the device to other connections. You might want to run this twice, since it may not build the device cache directly.
usage: ghome wscan [-h] [--ip IP]
optional arguments:
-h, --help show this help message and exit
Required named arguments.:
--ip IP Use "ip" for Google Home Mini device
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
