Skip to main content

Library to interface with GoDirect devices via USB and BLE

Project description

godirect

A Python module for reading from Vernier Go Direct® Sensors using USB or BLE.

Requirements

The following Python modules are required for godirect. They will be installed automatically as dependencies when installing godirect via pip.

  • vernierpygatt (fork of the pygatt project with a fix for the BGAPI on Windows)
  • hidapi
  • pexpect

Installation

pip install godirect

Example Use

Connect to the first available USB device or closest BLE device within the default threshold and collect 10 samples from the default sensor.

from godirect import GoDirect
godirect = GoDirect()
device = godirect.get_device()
if device != None and device.open(auto_start=True):
	sensors = device.get_enabled_sensors()
	print("Connected to "+device.name)
	print("Reading 10 measurements")
	for i in range(0,10):
		if device.read():
			for sensor in sensors:
				print(sensor.sensor_description+": "+str(sensor.value))
	device.stop()
	device.close()
godirect.quit()

Note that you can choose to enable USB, BLE, or both. By default both will be enabled.

godirect = GoDirect(use_ble=True, use_usb=True)

Here is how to obtain a list of GoDirectDevice objects from the BLE and/or USB backends.

# returns a list of GoDirectDevice objects
devices = godirect.list_devices()

Or you can let the library automatically find the nearest device for you.

# returns a GoDirectDevice on success or None on failure
mydevice = godirect.get_device()

# to adjust the BLE threshold pass in a minimum dB value
mydevice = godirect.get_device(threshold=-200)

Once a device is found or selected it must be opened. By default only information will be gathered on Open. To automatically enable the default sensors and start measurements send auto_start=True and skip to getting a list of enabled sensors.

# returns True on success or False on failure
mydevice.open()

Once a device is opened you can obtain a list of sensor objects available on the device.

# returns a list of Sensor objects
sensors = mydevice.list_sensors()

Optionally you can select the sensors you want to collect from, otherwise the default sensor(s) will be used.

# pass a list of sensor numbers to enable
mydevice.enable_sensors([2,3,4])
# start measurements at the typical rate for the enabled sensors
mydevice.start() # returns True on success

# start measurements at 1000ms per sample
mydevice.start(period=1000)

# get a list of the GoDirectSensor objects that are enabled
mysensors = mydevice.get_enabled_sensors()

The read() method will block until data is returned so it is acceptable to read in a tight loop.

for i in range(0,10):
  # read() will append the measurement received to the values list in the Sensor object
  if mydevice.read():
    for sensor in mysensors:
			print(sensor.value)

The stop() method will stop data collection on the device. The close() method will disconnect the USB or BLE device. The quit() method will stop the USB or BLE backends gracefully.

Debugging

godirect uses the standard python logging module. You can set the logging verbosity to INFO or DEBUG to see more communication detail.

import logging
logging.basicConfig()
logging.getLogger('godirect').setLevel(logging.DEBUG)
logging.getLogger('pygatt').setLevel(logging.DEBUG)

Windows

The pygatt module uses the BGAPI backend to communicate with the BLE dongle. You might have to specify the COM port assigned to the BLE dongle if the auto-detection fails.

godirect = GoDirect(ble_com_port='COM9')

License

GNU General Public License v3 (GPLv3)

Vernier products are designed for educational use. Our products are not designed nor are they recommended for any industrial, medical, or commercial process such as life support, patient diagnosis, control of a manufacturing process, or industrial testing of any kind.

Maintainer

Generate pydocs from the docs folder with:

python3 -m pydoc -w godirect
python3 -m pydoc -w godirect.sensor
# etc

Upload to the PyPI test server:

python3 setup.py sdist bdist_wheel 
python3 -m twine upload dist/*

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for godirect, version 0.9.6
Filename, size File type Python version Upload date Hashes
Filename, size godirect-0.9.6-py3.7.egg (36.7 kB) File type Egg Python version 3.7 Upload date Hashes View
Filename, size godirect-0.9.6-py3-none-any.whl (28.2 kB) File type Wheel Python version py3 Upload date Hashes View
Filename, size godirect-0.9.6.tar.gz (14.7 kB) File type Source Python version None Upload date Hashes View

Supported by

Pingdom Pingdom Monitoring Google Google Object Storage and Download Analytics Sentry Sentry Error logging AWS AWS Cloud computing DataDog DataDog Monitoring Fastly Fastly CDN DigiCert DigiCert EV certificate StatusPage StatusPage Status page