Skip to main content

Health monitoring plugins for icinga/nagios

Project description

health monitoring plugins:


This is the main readme file for the health montiroing plugins project. In this project we pubish all our plugins we write for icinga / nagios. The plugins are provided on pypi as python package.

All plugins are released under the GPLv2.

PyPI version

CodeFactor

Maintainability

Plugins

A detailed description can be found in the README in the doc folder.

check_jenkins_api

Monitor the jobs in the Jenkins job queue

check_local_cpu_temp

Check the local CPU temperature without the usage of "lm-sensors"

check_snmp_fortinet

Monitor Fortinet Wifi Controllers via SNMP

check_snmp_procurve

Monitor HP / Aruba procurve switches via SNMP

check_snmp_apc_ups

Monitor an UPS from APC via SNMP.

check_snmp_eaton_ups

Monitor an UPS from Eaton via SNMP. Requires the built in Eaton network card.

check_snmp_lband

Check the status of the CROSS TECHNOLOGIES redundancy controller 2082-141. Implemented against MIB 2082-141.mib

check_meinberg_ntp

Check the Meinberg NTP server LANTIME M300.

The plugin checks the current ntp and gps state, shows the current gps position and checks the good satellites. Tested with firmware version 5.30 and 6.18 (NG).

check_moxa_6000

Check the status of a Moxa NPORT 6000 RS232 to LAN converter.
You can check each port for the CTS, DSR, DTR and Error count.

check_snmp_ilo4

This plugin checks the health of HP servers with iLo 4 interface via SNMP.

check_snmp_janitza

Check the status of a Janitza 604 device.

check_snmp_large_storage

Check the used / free disk space of a device via SNMP (using the HOST-RESOURCES-MIB hrStorageSize). There are already script doing that like http://nagios.manubulon.com/snmp_storage.html . But these check script have a big problem with large storage systems.

check_snmp_port

Check the status of a tcp/udp port via SNMP. For TCP ports also the status is checked (e.g listen, established).

check_snmp_raritan

Check a Raritan Dominition PX PDU (Power Distribution Unit):

  • outlets (On, Off)
  • inlet (Power, Current, Voltage)
  • connected sensors

check_snmp_service

Icinga / Nagios plugin to check if a Windows service is in running state via SNMP.

check_snmp_time2

This plugin compares the time of the icinga/nagios machine with the time of a remote device.

check_snmp_idrac

This plugin checks the health of Dell iDRAC.

check_snmp_teledyne

This plugin checks the health of Teledyn Paradise Datacom Sattelite Modem.

check_snmp_ubiquiti

Check the status of a Ubiquiti airMax device.

check_microwavemodem

Check the status of a Microwave Modem

check_newtecmodem

Check the status of a Newtec Modem

check_snmp_cambium_ptp700

Check the status of a Cambium PTP 700 radio

check_snmp_eps_plus

Check the status of a ePowerSwitches (8XM+).

Installation

pip (recommended)

The complete plugin package is available at PyPI

If your Linux machine is directly connected to the internet, you can use pip to install the package. Just run:

pip install health_monitoring_plugins

The plugins will be installed in your PATH. So the scripts can be executed directly.

If you are behind a firewall or not connected to the internet, you can download the tar.hz from PyPI and install it with

health_monitoring_plugins-<version>.tar.gz

To uninstall the package you can run:

pip uninstall health_monitoring_plugins

setup.py

You can download the source package from [PyPI] (https://pypi.python.org/pypi/health_monitoring_plugins) or just clone this repository. To run setup.py you will need the python-setuptools.

To install the package from source with setup.py, you can run

tar xfvz health_monitoring_plugins-<version>.tar.gz
cd health_monitoring_plugins
python setup.py install

Run the unittests

To run the unittests just execute:

python setup.py test

The unittests require pytest. For the unittests we use the testagent from haxtibal.

Troubleshooting

When calling the plugin, I receive an error like "ImportError: No module named health_monitoring_plugins.raritan"

Seems that you did not install the python package. The plugins can not be called directly. Check the Installation section.

"Workaround:"

PYTHONPATH=~/PycharmProjects/health_monitoring_plugins/ health_monitoring_plugins/check_snmp_raritan/check_snmp_raritan.py

Roadmap

Version 0.3.0

  • Refactoring of Moxa plugin
  • Refactoring of APC plugin
  • Migrate from netsnmp to pysnmp for plugins
  • Remove obsolete plugins

Version 1.0.0

  • Python 3 support
  • Refactoring of tests (remove netsnmp)

Changelog

Version 0.2.0
  • Updated license notices according https://www.gnu.org/licenses/gpl-howto.html
  • Preparations for Python3:
    • Refactored check_snmp_large_storage
    • Refactored check_snmp_service
    • Refactored check_snmp_port
    • Refactored check_snmp_time2
    • Refactoring of iLo plugin
    • Refactored check_snmp_procurve.py
    • Refactored check_snmp_eaton_ups.py
      • Removed check that are not compatible with 9SX series
  • Small fixes and PEP 8 improvements
  • Added check_snmp_eps_plus
  • Added check_snmp_cambium_ptp700
  • Improved snmp exception handling
  • Added --snmptimeout parameter
  • iDrac plugin shows now "warning" instead of "nonCritical"
Version 0.1.0
  • Added check_local_cpu_temp.py
  • check_snmp_ilo4:
    • Fixed snmp v2 community 4 (thanks to nb85)
  • Added SNMPv3 support to all plugins for devices supporting SNMPv3
  • Added common test for SNMPv3.
  • PEP8 & general code improvements
  • check_snmp_raritan:
    • Fixed exception in check_snmp_raritan if sensor does not return a valid value.
    • Moved units in metrics from UOM to label to avoid conflicts with Graphite
  • check_snmp_eaton:
    • Added support of Eaton 9SX series
    • Changed threshold options for check_snmp_eaton_ups
  • Refactored check_meinberg_ntp plugin
  • check_snmp_idrac:
    • Refactoring
    • Added noPowerRedundancy option (thanks to ironbishop)
    • Fixed snmp v2 community
  • Added check_microwavemodem
  • Added check_newtecmodem
  • Migration from github to codeberg
Version 0.0.9
  • Added check_snmp_instadios_csm
  • Added SNMPv3 support for check_snmp_idrac
  • Fixed some bugs in check_snmp_idrac (error if sever is powered off or if the power supply is not redundant)
Version 0.0.8
  • Added check_snmp_fortinet
  • Added check_jenkins_api
Version 0.0.7
  • Added check_snmp_procurve
  • Added check_snmp_lband
  • Added check_snmp_eaton_ups
  • Added check_snmp_apc_ups
  • Several bugfixes and code improvements
Version 0.0.6
  • Fixed segfault, if there is no route to host
Version 0.0.5
  • Added check_snmp_teledyne, check_snmp_janitza, check_snmp_ubiquiti

  • Several bugfixes

Version 0.0.4
  • Fixed bug in check_snmp_time2

  • Added check_snmp_idrac

Version 0.0.3
  • Several bugfixes and code cleanup
Version 0.0.2
  • Several bugfixes and code cleanup
Version 0.0.2
  • Added unittests for all plugins
  • Fixed a bug in check_snmp_raritan Inlet check
  • Cleaned up some parts of the code
  • Better package structure
Version 0.0.1
  • The first testing release including all developed check plugins

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

health_monitoring_plugins-0.2.0.tar.gz (88.4 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page